1|Page
CR101B INTRODUCTION TO COLLISION
REPAIR EXAM QUESTIONS AND ANSWERS
Which of these warnings is shown in the symbol below? - ✔✔Flammable
The reason a safety cable is used on a pulling chain is to: - ✔✔help reduce backlash if the chain comes
loose.
Why are a type of lineman's gloves recommended when working with high voltage parts? - ✔✔They are
electrically insulated.
Which of these safety items is recommended when doing the process shown in the photo below? (Using a
hammer & dolly) - ✔✔Safety glasses
Which of these warnings is shown in the symbol below? - ✔✔Poison
Which of these is a safety issue when doing the process shown in the photo below? (Spot welding) -
✔✔Sparking from the welding process
Which of these safety items is missing on the technician in the photo below? (Using angle grinder) -
✔✔Full-face shield
Which of these safety items is missing on the technician in the photo below? (Wiping a car down with
something) - ✔✔Protective gloves
Which of these sheathing colors is commonly used to designate high voltage wiring? - ✔✔Bright orange
Which of these safety equipment items avoids flash burn when observing the task shown in the photo
below? (welding) - ✔✔Welding helmet
Created by Katelyn Whitman © 2025, All Rights Reserved.
, 2|Page
Technician A says that employers are allowed to remove information from an SDS for use in the work
place. Technician B says that employers should retain an SDS for 30 years after the product is no longer
used. Who is right? - ✔✔B only
A carcinogen is a substance that causes: - ✔✔cancer
Olfactory fatigue is when a person: - ✔✔can no longer smell a chemical after exposure.
A Class B fire extinguisher could be used on a: - ✔✔burning solvent.
Which of these can occur while welding on a panel that has a catalyzed clearcoat finish? - ✔✔Release of
isocyanate vapors
Hepatitis B is considered: - ✔✔a blood borne pathogen.
Information on cleaning a hazardous material spill can be found in what section of an SDS? -
✔✔Accidental Release Measures
If a container does not have a label, a technician should: - ✔✔avoid handling material until identified.
Which of these should be worn when using a half- mask supplied-air respirator during refinishing? -
✔✔Goggles
A flammable material: - ✔✔can easily catch fire and burn rapidly or explosively.
The process being shown in the photo above is: (body filler) - ✔✔applying body filler.
A supplement is a: - ✔✔change to the damage report.
Which of these damage conditions is illustrated above? (Bend in frame rail) - ✔✔Mash
The imaginary plane shown in red in the illustration above is used to measure: (through center of vehicle
- front to rear) - ✔✔width
Created by Katelyn Whitman © 2025, All Rights Reserved.
CR101B INTRODUCTION TO COLLISION
REPAIR EXAM QUESTIONS AND ANSWERS
Which of these warnings is shown in the symbol below? - ✔✔Flammable
The reason a safety cable is used on a pulling chain is to: - ✔✔help reduce backlash if the chain comes
loose.
Why are a type of lineman's gloves recommended when working with high voltage parts? - ✔✔They are
electrically insulated.
Which of these safety items is recommended when doing the process shown in the photo below? (Using a
hammer & dolly) - ✔✔Safety glasses
Which of these warnings is shown in the symbol below? - ✔✔Poison
Which of these is a safety issue when doing the process shown in the photo below? (Spot welding) -
✔✔Sparking from the welding process
Which of these safety items is missing on the technician in the photo below? (Using angle grinder) -
✔✔Full-face shield
Which of these safety items is missing on the technician in the photo below? (Wiping a car down with
something) - ✔✔Protective gloves
Which of these sheathing colors is commonly used to designate high voltage wiring? - ✔✔Bright orange
Which of these safety equipment items avoids flash burn when observing the task shown in the photo
below? (welding) - ✔✔Welding helmet
Created by Katelyn Whitman © 2025, All Rights Reserved.
, 2|Page
Technician A says that employers are allowed to remove information from an SDS for use in the work
place. Technician B says that employers should retain an SDS for 30 years after the product is no longer
used. Who is right? - ✔✔B only
A carcinogen is a substance that causes: - ✔✔cancer
Olfactory fatigue is when a person: - ✔✔can no longer smell a chemical after exposure.
A Class B fire extinguisher could be used on a: - ✔✔burning solvent.
Which of these can occur while welding on a panel that has a catalyzed clearcoat finish? - ✔✔Release of
isocyanate vapors
Hepatitis B is considered: - ✔✔a blood borne pathogen.
Information on cleaning a hazardous material spill can be found in what section of an SDS? -
✔✔Accidental Release Measures
If a container does not have a label, a technician should: - ✔✔avoid handling material until identified.
Which of these should be worn when using a half- mask supplied-air respirator during refinishing? -
✔✔Goggles
A flammable material: - ✔✔can easily catch fire and burn rapidly or explosively.
The process being shown in the photo above is: (body filler) - ✔✔applying body filler.
A supplement is a: - ✔✔change to the damage report.
Which of these damage conditions is illustrated above? (Bend in frame rail) - ✔✔Mash
The imaginary plane shown in red in the illustration above is used to measure: (through center of vehicle
- front to rear) - ✔✔width
Created by Katelyn Whitman © 2025, All Rights Reserved.
