1|Page
NCCER study guide Module 1 Basic Safety Exam
Questions and Answers 100% Pass
Companies with strong safety cultures usually have lower _ . - ✔✔turnover
Safety is a learned behavior and attitude. T/F - ✔✔TRUE
Poor lighting, excessive noise, inadequate guards for moving parts are examples of _ _. - ✔✔unsafe
conditions
The activity that consists of breaking a job into its component task and then analyzing each step for
potential hazards is called _ _ _ . - ✔✔job safety analysis
The measure of probability, consequences, and exposure related to an event is referred to as _ . - ✔✔Risk
If there is a hole in the floor of a structure, the preferred method of protecting workers from falls is to _ _
_ _ _ _ _ . - ✔✔cover the opening and label the cover
The D-ring or support point on a safety harness should be placed _ _ _ _ _ _ . - ✔✔in the middle of the
back
A personal fall arrest system should be inspected monthly by a _ _ . - ✔✔competent person
Lanyards that have no shock-absorbing features are used for _ . - ✔✔positioning
When placing a ladder against a platform or roof, the top of the ladder should extend above the point
where the ladder touches the platform or roof by at least _ _ _ . - ✔✔3 feet (91 cm)
When performing overhead work on scaffolding, _ , _ _ , or _ must be applied as protective measures to
prevent objects from falling and striking a person below. - ✔✔Toeboards, debris nets, canopies
Created by Katelyn Whitman © 2025, All Rights Reserved. 100% PASS GUARANTEE
NCCER study guide Module 1 Basic Safety Exam
Questions and Answers 100% Pass
Companies with strong safety cultures usually have lower _ . - ✔✔turnover
Safety is a learned behavior and attitude. T/F - ✔✔TRUE
Poor lighting, excessive noise, inadequate guards for moving parts are examples of _ _. - ✔✔unsafe
conditions
The activity that consists of breaking a job into its component task and then analyzing each step for
potential hazards is called _ _ _ . - ✔✔job safety analysis
The measure of probability, consequences, and exposure related to an event is referred to as _ . - ✔✔Risk
If there is a hole in the floor of a structure, the preferred method of protecting workers from falls is to _ _
_ _ _ _ _ . - ✔✔cover the opening and label the cover
The D-ring or support point on a safety harness should be placed _ _ _ _ _ _ . - ✔✔in the middle of the
back
A personal fall arrest system should be inspected monthly by a _ _ . - ✔✔competent person
Lanyards that have no shock-absorbing features are used for _ . - ✔✔positioning
When placing a ladder against a platform or roof, the top of the ladder should extend above the point
where the ladder touches the platform or roof by at least _ _ _ . - ✔✔3 feet (91 cm)
When performing overhead work on scaffolding, _ , _ _ , or _ must be applied as protective measures to
prevent objects from falling and striking a person below. - ✔✔Toeboards, debris nets, canopies
Created by Katelyn Whitman © 2025, All Rights Reserved. 100% PASS GUARANTEE
