1
OSHA BASIC ORIENTATION PLUS EXAM LATEST
WITH ACTUAL QUESTIONS AND CORRECT VERIFIED
ANSWERS/ALREADY GRADED A+
What is the most frequently cited OSHA violation? - (answers)Fall Protection
What key elements are essential to recognizing hazards and reducing or eliminating workplace
hazards? - (answers)Management commitment and employee involvement
You are encouraged to ask your coworkers/supervisor for information whenever you have a problem
or are in doubt about what to do on a job? - (answers)True
It is your responsibility to follow all safety regulations, inform your employer of any unsafe condition;
report all injuries no matter how minor they seem and wear the proper personal protective
equipment? - (answers)True
The OSHA standard that addresses the requirements for preventing and lessening the results of a
bad release of toxic, reactive, flammable, or highly explosive hazardous chemicals from a process -
(answers)Process safety management Standard
The process Hazard Analysis (PHA) is one of the most important parts of the PSM program. PHAs are
used to identify and evaluate major processes and ensure they are - (answers)Evaluated, Controlled,
and Identified
In the PSM standard OSHA states employees must be trained if they work with highly hazardous
chemicals. - (answers)True
Facilities are not permitted to control your entrance and exit in covered process areas. -
(answers)False
What should be your first concern from the moment you enter the work site? - (answers)Safety
Under the Stop Work Authority, you have the right and obligation to stop a work activity if you have
reason to believe your own safety or a coworkers safety is in jeopardy or if the work plan is not
clearly established or understood . - (answers)True
, 2
What's needed in order to operate a plant-owned vehicle or mobile equipment while at a facility -
(answers)qualified only authorized only
What type of work permits you may encounter on the job - (answers)safe work permits confined
space entry permits, hot work permits, line entry or line breaking permits, lockout/tagout permits
if you are replacing a piece of equipment the new one should be the same as the one being
removed. If its not you should find out whether the change was on purpose. what is this called -
(answers)Management of change
Used only where an immediate life threatening hazard exists - (answers)Danger
Used where immediate non life threatening hazards exist - (answers)Warning Sign
Used to warn against potential hazards or to caution against unsafe practices - (answers)Caution
signs
Physical devices that are designed to prevent entry into an area where hazards are present. -
(answers)Barriers
Obstacles that discourage the passage of persons or vehicles - (answers)Barricade
When lifting or setting down a load, bend at the - (answers)Knees
If you experience pain or discomfort as a result of your work activities, you should do what? -
(answers)report it to your supervisor as soon as possible
What are the most common diseases caused by bloodborne pathogens in the workplace -
(answers)Human Immunodeficiency, Hepatitis B, Hepatitis C
Universal precautions is an infection control approach where you treat all blood and body fluids as if
they are known to be infectious for bloodborne pathogens only if the injured person is sick -
(answers)False
OSHA BASIC ORIENTATION PLUS EXAM LATEST
WITH ACTUAL QUESTIONS AND CORRECT VERIFIED
ANSWERS/ALREADY GRADED A+
What is the most frequently cited OSHA violation? - (answers)Fall Protection
What key elements are essential to recognizing hazards and reducing or eliminating workplace
hazards? - (answers)Management commitment and employee involvement
You are encouraged to ask your coworkers/supervisor for information whenever you have a problem
or are in doubt about what to do on a job? - (answers)True
It is your responsibility to follow all safety regulations, inform your employer of any unsafe condition;
report all injuries no matter how minor they seem and wear the proper personal protective
equipment? - (answers)True
The OSHA standard that addresses the requirements for preventing and lessening the results of a
bad release of toxic, reactive, flammable, or highly explosive hazardous chemicals from a process -
(answers)Process safety management Standard
The process Hazard Analysis (PHA) is one of the most important parts of the PSM program. PHAs are
used to identify and evaluate major processes and ensure they are - (answers)Evaluated, Controlled,
and Identified
In the PSM standard OSHA states employees must be trained if they work with highly hazardous
chemicals. - (answers)True
Facilities are not permitted to control your entrance and exit in covered process areas. -
(answers)False
What should be your first concern from the moment you enter the work site? - (answers)Safety
Under the Stop Work Authority, you have the right and obligation to stop a work activity if you have
reason to believe your own safety or a coworkers safety is in jeopardy or if the work plan is not
clearly established or understood . - (answers)True
, 2
What's needed in order to operate a plant-owned vehicle or mobile equipment while at a facility -
(answers)qualified only authorized only
What type of work permits you may encounter on the job - (answers)safe work permits confined
space entry permits, hot work permits, line entry or line breaking permits, lockout/tagout permits
if you are replacing a piece of equipment the new one should be the same as the one being
removed. If its not you should find out whether the change was on purpose. what is this called -
(answers)Management of change
Used only where an immediate life threatening hazard exists - (answers)Danger
Used where immediate non life threatening hazards exist - (answers)Warning Sign
Used to warn against potential hazards or to caution against unsafe practices - (answers)Caution
signs
Physical devices that are designed to prevent entry into an area where hazards are present. -
(answers)Barriers
Obstacles that discourage the passage of persons or vehicles - (answers)Barricade
When lifting or setting down a load, bend at the - (answers)Knees
If you experience pain or discomfort as a result of your work activities, you should do what? -
(answers)report it to your supervisor as soon as possible
What are the most common diseases caused by bloodborne pathogens in the workplace -
(answers)Human Immunodeficiency, Hepatitis B, Hepatitis C
Universal precautions is an infection control approach where you treat all blood and body fluids as if
they are known to be infectious for bloodborne pathogens only if the injured person is sick -
(answers)False
