Certified Healthcare Constructor (CHC)
Certified Healthcare Constructor (CHC)
LATEST UPDATE 2025 (QUESTIONS AND
CORRECT VERIFIED ANSWERS) Guaranteed
Pass 100%
When should medical equipment manufacturer selections ideally be made for each modality during the
planning, design, and construction process?
Before the end of DDs
What is a medical equipment modality?
Refers to different types of imaging equipment
What two types of med gas are required in a typical med/surg patient room?
vacuum and oxygen according to Guidelines for Design and Construction of Health Care Facilities.
When should medical equipment modality selections ideally be made during the planning, design, and
construction process?
Before the end of SDs
What are some examples of medical imaging modalities?
Conventional radiography
Fluoroscopy
Angiography
,Certified Healthcare Constructor (CHC)
Mammography
Computed Tomography
Ultrasound and Ultrasound/Doppler
Magnetic resonance Imaging
Nuclear Medicine
NFPA 101-2000 details that "primary level of exit discharge of a building shall be the lowest story whose
floor is level with or above finished grade on the exterior wall line for XX% or more of its perimeter."
50%
Does an MRI machine use radiation to produce its images?
No, it uses magnetic and radio frequencies
Does an ultrasound use radiation to produce its images?
No, it uses sound waves
What does a CT scan machine use to produce its images?
Ionizing radiation
When should ICRA planning be complete when a new construction project is being built next to an
existing building if the two will eventually connect?
Before construction starts
, Certified Healthcare Constructor (CHC)
Before an employee enters a permit-required confined space, the internal atmosphere shall be tested
with a calibrated direct-reading instrument for oxygen content and which of the following?
potential toxic air contaminants, and flammable gases and vapors
What are the 3 main components of the exterior wall system that keeps moisture out of the building?
weather barrier, air gap, exterior finish
What is the best contract type for an owner if a project is only 50% designed?
cost plus GMP
Is a facility in bad shape if it has a high FCI number?
Yes
Is self latching hardware required at doors within openings that are part of the smoke barrier?
No
How often should fire extinguishers be inspected at an HCF?
Monthly
How often should alternate exits caused by an ILSM plan be inspected during construction?
Daily
Certified Healthcare Constructor (CHC)
LATEST UPDATE 2025 (QUESTIONS AND
CORRECT VERIFIED ANSWERS) Guaranteed
Pass 100%
When should medical equipment manufacturer selections ideally be made for each modality during the
planning, design, and construction process?
Before the end of DDs
What is a medical equipment modality?
Refers to different types of imaging equipment
What two types of med gas are required in a typical med/surg patient room?
vacuum and oxygen according to Guidelines for Design and Construction of Health Care Facilities.
When should medical equipment modality selections ideally be made during the planning, design, and
construction process?
Before the end of SDs
What are some examples of medical imaging modalities?
Conventional radiography
Fluoroscopy
Angiography
,Certified Healthcare Constructor (CHC)
Mammography
Computed Tomography
Ultrasound and Ultrasound/Doppler
Magnetic resonance Imaging
Nuclear Medicine
NFPA 101-2000 details that "primary level of exit discharge of a building shall be the lowest story whose
floor is level with or above finished grade on the exterior wall line for XX% or more of its perimeter."
50%
Does an MRI machine use radiation to produce its images?
No, it uses magnetic and radio frequencies
Does an ultrasound use radiation to produce its images?
No, it uses sound waves
What does a CT scan machine use to produce its images?
Ionizing radiation
When should ICRA planning be complete when a new construction project is being built next to an
existing building if the two will eventually connect?
Before construction starts
, Certified Healthcare Constructor (CHC)
Before an employee enters a permit-required confined space, the internal atmosphere shall be tested
with a calibrated direct-reading instrument for oxygen content and which of the following?
potential toxic air contaminants, and flammable gases and vapors
What are the 3 main components of the exterior wall system that keeps moisture out of the building?
weather barrier, air gap, exterior finish
What is the best contract type for an owner if a project is only 50% designed?
cost plus GMP
Is a facility in bad shape if it has a high FCI number?
Yes
Is self latching hardware required at doors within openings that are part of the smoke barrier?
No
How often should fire extinguishers be inspected at an HCF?
Monthly
How often should alternate exits caused by an ILSM plan be inspected during construction?
Daily
