CSX Conductor Week 6 - Advanced Train
Movement UPDATED ACTUAL
QUESTIONS and CORRECT Answers
Trains using other than main or signaled tracks must move at a speed that permits stopping
within ____ the range of ______, short of a train, a car, on track equipment, an obstruction, a
stop signal, a derail, or an improperly lined switch - CORRECT ANSWER - Half, Vision
__ mph on non-signaled sidings - CORRECT ANSWER - 25
__ mph when moving to and from the main track, operating through hand-operated switches not
equipped with a signal - CORRECT ANSWER - 15
__ mph when *not* moving to or from the main track, operating through hand-operated switches
- CORRECT ANSWER - 10
__ mph on other than main tracks or signaled tracks - CORRECT ANSWER - 10
_ mph within designated locomotive service track or car shop repair track areas - CORRECT
ANSWER -5
Tracks other than main, signaled, or sidings may be used _______ permission or authority from
the train dispatcher or control station - CORRECT ANSWER - Without
Designated in special instructions for the purpose of meeting and passing trains - CORRECT
ANSWER - Sidings
A track designated in special instruction as a __________ ______. In signal territory, signals do
not govern movement on the siding. Entrance and exit signals only authorize trains to enter or
leave the siding - CORRECT ANSWER - Controlled Siding
, A track designated in special instructions as a ________ ______ where movement on the siding
is authorized by block signals and signal rules apply to movement on the siding - CORRECT
ANSWER - Signaled Siding
Trains must not enter a siding unless authorized by ______ __________ or _____ __________ -
CORRECT ANSWER - Signal Indication, Train Dispatcher
Trains instructed to take siding must enter the the siding at the _____ switch unless directed
otherwise by the train dispatcher - CORRECT ANSWER - First
Trains must report to dispatcher when the train has _______ the main track and ________ have
been restored for movement on the main track - CORRECT ANSWER - Cleared, Switches
Do not leave equipment unattended on a siding without permission of the _____ __________ -
CORRECT ANSWER - Train Dispatcher
Trains must approach these locations prepared to stop: - CORRECT ANSWER - 1. Main
Tracks
2. Junctions
3. Drawbridges
4. Railroad crossings at grade
At railroad crossings at grade equipped with stop signs, a train must not pass the stop sign and
must remain clear of the crossing until: - CORRECT ANSWER - 1. Special instructions
governing the using of the crossing have been met
2. Given a proceed signal by a flagman, if present
3. There is no conflicting movement and it is safe to pass
Movement UPDATED ACTUAL
QUESTIONS and CORRECT Answers
Trains using other than main or signaled tracks must move at a speed that permits stopping
within ____ the range of ______, short of a train, a car, on track equipment, an obstruction, a
stop signal, a derail, or an improperly lined switch - CORRECT ANSWER - Half, Vision
__ mph on non-signaled sidings - CORRECT ANSWER - 25
__ mph when moving to and from the main track, operating through hand-operated switches not
equipped with a signal - CORRECT ANSWER - 15
__ mph when *not* moving to or from the main track, operating through hand-operated switches
- CORRECT ANSWER - 10
__ mph on other than main tracks or signaled tracks - CORRECT ANSWER - 10
_ mph within designated locomotive service track or car shop repair track areas - CORRECT
ANSWER -5
Tracks other than main, signaled, or sidings may be used _______ permission or authority from
the train dispatcher or control station - CORRECT ANSWER - Without
Designated in special instructions for the purpose of meeting and passing trains - CORRECT
ANSWER - Sidings
A track designated in special instruction as a __________ ______. In signal territory, signals do
not govern movement on the siding. Entrance and exit signals only authorize trains to enter or
leave the siding - CORRECT ANSWER - Controlled Siding
, A track designated in special instructions as a ________ ______ where movement on the siding
is authorized by block signals and signal rules apply to movement on the siding - CORRECT
ANSWER - Signaled Siding
Trains must not enter a siding unless authorized by ______ __________ or _____ __________ -
CORRECT ANSWER - Signal Indication, Train Dispatcher
Trains instructed to take siding must enter the the siding at the _____ switch unless directed
otherwise by the train dispatcher - CORRECT ANSWER - First
Trains must report to dispatcher when the train has _______ the main track and ________ have
been restored for movement on the main track - CORRECT ANSWER - Cleared, Switches
Do not leave equipment unattended on a siding without permission of the _____ __________ -
CORRECT ANSWER - Train Dispatcher
Trains must approach these locations prepared to stop: - CORRECT ANSWER - 1. Main
Tracks
2. Junctions
3. Drawbridges
4. Railroad crossings at grade
At railroad crossings at grade equipped with stop signs, a train must not pass the stop sign and
must remain clear of the crossing until: - CORRECT ANSWER - 1. Special instructions
governing the using of the crossing have been met
2. Given a proceed signal by a flagman, if present
3. There is no conflicting movement and it is safe to pass
