Flagger Workbook: Questions With Solutions
Urban (slow) Right Ans - 100ft
Urban (High) Right Ans - 350ft
Rural Right Ans - 500ft
Road Work Ahead Right Ans - to alert the motorists that they are
approaching a work zone
One Lane Road Ahead Right Ans - to inform the motorist what to expect
ahead
Symbolic Flagger Ahead Right Ans - to tell the motorist what to do
Arrow Boards Right Ans - shall not be used in conjunction with one-
lane, two way flagging operations
Transition Area(Flagger Taper) Right Ans - Area that follows the
advance warning area// the area the motorist is directed to travel in order
to get through the work
___ is used to channelize traffic into the open lane. Right Ans - Transition
Area(Flagger Taper)
Transition Area(Flagger Taper) Right Ans - 6 cones at 10-20ft apart
How many devices is used on a taper with spacing approximately 10 to 20
ft apart Right Ans - 6
Minimum heigh of the cones on high-speed roadways is a minimum of ___
inches Right Ans - 28
ANSI 107 Class 2(or higher) Right Ans - day and night
ANSI 107 Class 3 Right Ans - Only night time
Urban (slow) Right Ans - 100ft
Urban (High) Right Ans - 350ft
Rural Right Ans - 500ft
Road Work Ahead Right Ans - to alert the motorists that they are
approaching a work zone
One Lane Road Ahead Right Ans - to inform the motorist what to expect
ahead
Symbolic Flagger Ahead Right Ans - to tell the motorist what to do
Arrow Boards Right Ans - shall not be used in conjunction with one-
lane, two way flagging operations
Transition Area(Flagger Taper) Right Ans - Area that follows the
advance warning area// the area the motorist is directed to travel in order
to get through the work
___ is used to channelize traffic into the open lane. Right Ans - Transition
Area(Flagger Taper)
Transition Area(Flagger Taper) Right Ans - 6 cones at 10-20ft apart
How many devices is used on a taper with spacing approximately 10 to 20
ft apart Right Ans - 6
Minimum heigh of the cones on high-speed roadways is a minimum of ___
inches Right Ans - 28
ANSI 107 Class 2(or higher) Right Ans - day and night
ANSI 107 Class 3 Right Ans - Only night time