TTT1 written 2024
If the wire rope load on a base mounted Who is has a breaking strength of 20,500
pounds what is the actual working load limit? - ANSWERS4,100
The bridals slings on the pole perform work function? - ANSWERSSupports the pole
vertically and carries all the horizontal load.
if the wire rope load line on a base mounted hoist has a breaking strength of 21,500lbs
what is the actual working load limit when lifting personnel. - ANSWERS2,150lbs.
The two methods of measuring guy wire tensioner are? - ANSWERSDirect and Indirect.
where should I coax ground to be placed vertically in relation to the hoist grip? -
ANSWERSabove it.
what is the correct procedure for installing bolts in members of leg splices? -
ANSWERSUp and out
an overhaul ball provides work function and operations? - ANSWERSprovides weight
allowing the load line to return to the ground.
The best synthetic rope material to use for overhead lifting is? - ANSWERSpolyester.
what is a crown block used for? - ANSWERSto change the direction of a load or jump
line coming from the hoist when is a trained designated person necessary when lifting a
load with a crane? - ANSWERSWhen a crane can not physically enter a power line
restricted area.
which of these terms identifies a self support tower component? - ANSWERSHorizontal
member.
The cantilever is the distance between the bridal slings and a rooster has sheave. -
ANSWERSTrue.
When calculating a fall distance using a 6 foot energy absorber what is the maximum
pull out distance - ANSWERS4 ft.
what minimum force must a non-engineered anchor be able to withstand for fall
protection use? - ANSWERS5,000lbs.
If the wire rope load on a base mounted Who is has a breaking strength of 20,500
pounds what is the actual working load limit? - ANSWERS4,100
The bridals slings on the pole perform work function? - ANSWERSSupports the pole
vertically and carries all the horizontal load.
if the wire rope load line on a base mounted hoist has a breaking strength of 21,500lbs
what is the actual working load limit when lifting personnel. - ANSWERS2,150lbs.
The two methods of measuring guy wire tensioner are? - ANSWERSDirect and Indirect.
where should I coax ground to be placed vertically in relation to the hoist grip? -
ANSWERSabove it.
what is the correct procedure for installing bolts in members of leg splices? -
ANSWERSUp and out
an overhaul ball provides work function and operations? - ANSWERSprovides weight
allowing the load line to return to the ground.
The best synthetic rope material to use for overhead lifting is? - ANSWERSpolyester.
what is a crown block used for? - ANSWERSto change the direction of a load or jump
line coming from the hoist when is a trained designated person necessary when lifting a
load with a crane? - ANSWERSWhen a crane can not physically enter a power line
restricted area.
which of these terms identifies a self support tower component? - ANSWERSHorizontal
member.
The cantilever is the distance between the bridal slings and a rooster has sheave. -
ANSWERSTrue.
When calculating a fall distance using a 6 foot energy absorber what is the maximum
pull out distance - ANSWERS4 ft.
what minimum force must a non-engineered anchor be able to withstand for fall
protection use? - ANSWERS5,000lbs.
