TTT1- almost complete Exam 100%
Accurate!!
What are the three main components that make up a fall arrest system? -
ANSWERSAnchorage, Full body harness, and Attachments
Who is responsible for ensuring the General Duty Clause when OSHA has not yet
publicized the specific regulations? - ANSWERSEmployer
When should safety glasses be worn? - ANSWERSWhen grinding steel
Monopole components are identified as: - ANSWERSBase Flange
The following term is used to describe rules written by the Department of Labor: -
ANSWERSRegulations
Which government organization regulates tower lighting? - ANSWERSFAA
What does the person operating the Capstan need a clear view of? - ANSWERSThe
load and signal person
T/F: You should use a carabiner when lifting loads? - ANSWERSFalse
The four most common types of structures used to support antennas are: -
ANSWERSSelf-Supporting, Monopoles, Guyed, and Non-Standard
T/F: All antennas should be considered active? - ANSWERSTrue
The following piece of equipment can be used to power an electric Capstan when an
electrical outlet is not available: - ANSWERSGenerator
What is the heel block used for? - ANSWERSTo change the direction of the load, jump
or tag line from horizontal to vertical
The vehicle mounted capstan should be moved as close as possible to the __________
once the lifting path is determined. - ANSWERSLifting staging area
T/F: A safe practice is to stay 6 feet or more away from an active antenna -
ANSWERSTrue
What is the most common power source used with a Capstan Hoist? -
ANSWERSElectrical power
, When using an extension ladder, how many feet past the platform must the ladder
extend? - ANSWERS3 feet
A Capstan hoist should be inspected __________ before use? - ANSWERSDaily
A vertical life line should have a minimum breaking strength of how many pounds? -
ANSWERS5,000 lbs
What do the letters LOTO stand for? - ANSWERSLockout Tagout
T/F: Due to the resonance frequency and the high power of broadcast antennas,
overexposure is almost always a problem. - ANSWERSTrue
T/F: An RF monitor should be worn in areas of unknown RF exposure. -
ANSWERSTrue
The minimum force that a work positioning system anchorage must be able to withstand
is: - ANSWERS2 time the arresting force of 3,000 lbs.
If the wire rope load on a base mounted hoist has a breaking strength of 20,500
pounds, what is the actual working load limit? - ANSWERS4,100 lbs.
In the fall protection, the term __________ is used for stopping a free fall. -
ANSWERSFall arrest
T/F: The outer sheath of a synthetic endless sling is part of the slings strength -
ANSWERSFalse
According to industry standards, the minimum height from a lower surface or ground
where fall protection must be used is: - ANSWERS6 feet
What is the Factor of Safety specified for rigging equipment-hooks, shackles and
slings? - ANSWERS5 to 1
What is the factor of safety specified for synthetic rope? - ANSWERS10 to 1
Exposure to nonionizing radiation does what to the human body? - ANSWERSDoes not
permanently change cells
The bridle slings on the pole perform what function? - ANSWERSSupports the pole
vertically and carries all the horizontal load
If the wire rope load line on a base mounted hoist has a breaking strength of 21,500
lbs., what is the actual working load limit when lifting personnel? - ANSWERS2,150 lbs.
Accurate!!
What are the three main components that make up a fall arrest system? -
ANSWERSAnchorage, Full body harness, and Attachments
Who is responsible for ensuring the General Duty Clause when OSHA has not yet
publicized the specific regulations? - ANSWERSEmployer
When should safety glasses be worn? - ANSWERSWhen grinding steel
Monopole components are identified as: - ANSWERSBase Flange
The following term is used to describe rules written by the Department of Labor: -
ANSWERSRegulations
Which government organization regulates tower lighting? - ANSWERSFAA
What does the person operating the Capstan need a clear view of? - ANSWERSThe
load and signal person
T/F: You should use a carabiner when lifting loads? - ANSWERSFalse
The four most common types of structures used to support antennas are: -
ANSWERSSelf-Supporting, Monopoles, Guyed, and Non-Standard
T/F: All antennas should be considered active? - ANSWERSTrue
The following piece of equipment can be used to power an electric Capstan when an
electrical outlet is not available: - ANSWERSGenerator
What is the heel block used for? - ANSWERSTo change the direction of the load, jump
or tag line from horizontal to vertical
The vehicle mounted capstan should be moved as close as possible to the __________
once the lifting path is determined. - ANSWERSLifting staging area
T/F: A safe practice is to stay 6 feet or more away from an active antenna -
ANSWERSTrue
What is the most common power source used with a Capstan Hoist? -
ANSWERSElectrical power
, When using an extension ladder, how many feet past the platform must the ladder
extend? - ANSWERS3 feet
A Capstan hoist should be inspected __________ before use? - ANSWERSDaily
A vertical life line should have a minimum breaking strength of how many pounds? -
ANSWERS5,000 lbs
What do the letters LOTO stand for? - ANSWERSLockout Tagout
T/F: Due to the resonance frequency and the high power of broadcast antennas,
overexposure is almost always a problem. - ANSWERSTrue
T/F: An RF monitor should be worn in areas of unknown RF exposure. -
ANSWERSTrue
The minimum force that a work positioning system anchorage must be able to withstand
is: - ANSWERS2 time the arresting force of 3,000 lbs.
If the wire rope load on a base mounted hoist has a breaking strength of 20,500
pounds, what is the actual working load limit? - ANSWERS4,100 lbs.
In the fall protection, the term __________ is used for stopping a free fall. -
ANSWERSFall arrest
T/F: The outer sheath of a synthetic endless sling is part of the slings strength -
ANSWERSFalse
According to industry standards, the minimum height from a lower surface or ground
where fall protection must be used is: - ANSWERS6 feet
What is the Factor of Safety specified for rigging equipment-hooks, shackles and
slings? - ANSWERS5 to 1
What is the factor of safety specified for synthetic rope? - ANSWERS10 to 1
Exposure to nonionizing radiation does what to the human body? - ANSWERSDoes not
permanently change cells
The bridle slings on the pole perform what function? - ANSWERSSupports the pole
vertically and carries all the horizontal load
If the wire rope load line on a base mounted hoist has a breaking strength of 21,500
lbs., what is the actual working load limit when lifting personnel? - ANSWERS2,150 lbs.
