DATE|COMPREHENSIVE FREQUENTLY MOST TESTED QUESTIONS AN
VERIFIED ANSWERS|GET IT 100% ACCURATE!!
Study online at https://quizlet.com/_g1eqlh
1. Information or intelligence that Data
has been processed and orga-
nized into its digital form.
2. What are the 7 Forms of Data? 1. Voice
2. Video
3. Picture
4. Texts
5. Numeric
6. Microprocessor Op Codes
7. ASCII
3. It's a two-way process of ex- Communication
changing intelligent informa-
tion from one point to another.
4. It concerns itself with the Data Communications
transmission (sending and re-
ceiving) of information be-
tween two locations with the
aid of computers.
5. It is the process of communi- Data Communications
cating information in a bina-
ry form between two points in
such a way that data must be
translated into a special code
for transmission.
6. This means sending informa- Data Communications
tion between machines that
are connected by physical
wires or radio links.
7. It is the field of computer sci- Data Communications
ence concerned with the trans-
fer of data from one computer
to another.
, 2024 Newest|Data Communications and Networking|2024-2025 UP-
DATE|COMPREHENSIVE FREQUENTLY MOST TESTED QUESTIONS AN
VERIFIED ANSWERS|GET IT 100% ACCURATE!!
Study online at https://quizlet.com/_g1eqlh
8. It is the sending and receiv- Data Communications
ing of data via any communica-
tions medium, such as a tele-
phone line.
9. 3 Basic Components of Data 1. Transmitter or Source
Communications 2. Communication/Transmission Path or
Communication/Transmission Medium
3. Receiver or Destination.
10. What are the UNIVERSAL Sev- 1. DTE at Point A.
en-Part Data Circuit? 2. Interface between the DTE and DCE at
Point A.
3. DCE at Point A
4. Transmission channel between Point A
and Point B.
5. DCE at Point B
6. Interface between the DCE and DTE at
Point B.
7. DTE at Point B.
11. What are the 5 Components of 1. Source
Communications System? 2. Transmitter
3. Transmission System
4. Receiver
5. Destination
12. It generates data to be trans- Source
mitted.
13. It converts data into transmit- Transmitter
table signals.
14. It carries data. Transmission System
15. It converts received signal into Receiver
data.
, 2024 Newest|Data Communications and Networking|2024-2025 UP-
DATE|COMPREHENSIVE FREQUENTLY MOST TESTED QUESTIONS AN
VERIFIED ANSWERS|GET IT 100% ACCURATE!!
Study online at https://quizlet.com/_g1eqlh
16. It takes incoming data. Destination
17. It includes all data processing Data Terminal Equipment (DTE)
equipments.
18. A device capable of establish- Data Commmunications Equipment (DCE)
ing, maintaining, and terminat-
ing a connection.
19. It may consists of physical cir- Communication Link (Medium)
cuit such as wires, cables, op-
tical wires, and serve as a high-
way of data.
20. It is a collection of computing Computer Network
devices that are connected in
various ways in order to com-
municate and share resources.
21. It connects two or more au- Computer Network
tonomous computers.
22. It can be defined as a sin- Computer Network
gle computer, called a host,
together with communication
circuits, communication equip-
ment, and terminals.
23. Defined as two or more com- Computer Network
puters connected via a com-
munication medium, together
with associated communica-
tion links, terminals, and com-
munications equipment.
24. What are the 6 Components of 1. Data or Information
Computer Network 2. Node
3. Protocol
, 2024 Newest|Data Communications and Networking|2024-2025 UP-
DATE|COMPREHENSIVE FREQUENTLY MOST TESTED QUESTIONS AN
VERIFIED ANSWERS|GET IT 100% ACCURATE!!
Study online at https://quizlet.com/_g1eqlh
4. Communication Medium or Media
5. Network Equipment
6. Software
25. These are any end devices Node
connected to a computer net-
work.
26. This is the set of rules and Protocol
standards.
27. These can be wired or wire- Communication Medium or Media
less.
28. Examples of this are switches, Network Equipment
hubs, routers, and modems.
29. The programs and other op- Software
erating information used by a
computer.
30. These are the guidelines that Standards
have been generally accepted
by the data communication in-
dustry.
31. What are the 2 Types of Stan- 1. Proprietary (Closed) System
dards? 2. Non-Proprietary (Open) System
32. This is a type of standard Proprietary (Closed) System
that is manufactured and con-
trolled by one company.
33. This is a type of standard Non-Proprietary (Open) System
where any company can pro-
duce compatible equipment or
software.
34.