GRAND CENTRAL 201 ADMIN EXAM LATEST 2024-2025 WITH 309 ACTU
QUESTIONS AND CORRECT VERIFIED ANSWERS ALREADY GRADED
1
Study online at https://quizlet.com/_g6h59v
1. Create and Configure Facili- These settings are found in Hyperspace
ty Structure: Configure depart- > Registration/Grand Central System
ments to show the Hospital Ac- Definitions > Service Area > Hospital Ac-
counts form count Settings. By clicking Dept Settings
and selecting the departments, it sets an
item in the department record.
2. Which of the following units re- Hospital OutPatient - Unit Type is re-
quire the Unit Type Field to be quired for any of the specialty units listed
set? in the options, such as Hospital Outpa-
tient. If this setting is blank for certain
specialty units, they won't fully function.
3. Create and Configure Facility In Bed Board: Always include
Structure: Configure a bed to This bed will appear in Bed Planning
show pertinent information to whether it is occupied or unoccupied.
bed planners In Census: Yes
This bed is included in census statistics
reporting.
4. Create and Configure Facility True
Structure: Attaching two revenue
locations to the same parent rev-
enue location can allow them to
share hospital accounts across
revenue locations
5. Create and Configure Facility ADT Unit/Department Settings
Structure: On which screen in the Unit Type: Hospital Outpatient.
department master file can you
specify that the department is an
HOD?
6. Create and Configure Facility D. The facility (for the majority's setting)
Structure: and A. Hospital A-B (for the overrides).
An organization has one service Though SA could be an option, it would
area with several hospitals. Hos- be best if it is set at the most general
pital A and B need a setting con- level (Facility) in case the organization
, GRAND CENTRAL 201 ADMIN EXAM LATEST 2024-2025 WITH 309 ACTU
QUESTIONS AND CORRECT VERIFIED ANSWERS ALREADY GRADED
1
Study online at https://quizlet.com/_g6h59v
figured one way. Hospital C, Hos- creates new service areas so that it will
pital D, Hospital E, and Hospital NOT need to be reset at that additional
F need the same setting config- service area.
ured a different way. This setting
is available at the department,
revenue location, service area,
and facility levels. Given this in-
formation, which records should
you edit to configure the set-
tings that all hospitals get what
they need? Configure the setting
in the fewest number of records
possible. Choose ALL answers
that apply.
A. Hospital A-B
B. Hospital C-F
C. The service area
D. The facility
7. Create and Configure Facility True
Structure:
The parent revenue location is
the lowest level of the facility
structure for reporting for hospi-
tal billing AR, payments, adjust-
ments and refunds.
8. Create and Configure Facility If you leave the Parent Hospital/ Clinic
Structure: Area field blank, you won't find your unit
List the setting that determines in Bed Administration, a Hyperspace tool
where a unit appears in Bed Ad- used to build and maintain rooms and
ministration beds
9. Grand Central Settings Overview: If a setting is configured at multiple lev-
Define the rule of specificity els of the setting's hierarchy, the system
uses the most specific level's setting. If
nothing is set at that level, the system
looks to the next most specific level's
, GRAND CENTRAL 201 ADMIN EXAM LATEST 2024-2025 WITH 309 ACTU
QUESTIONS AND CORRECT VERIFIED ANSWERS ALREADY GRADED
1
Study online at https://quizlet.com/_g6h59v
setting.
Facility (MORE GENERAL)
Service Area
Revenue Location
Department/Units (MOST SPECIFIC)
10. Unit Managers: Identify the type VIEW RECORD
of record that controls highlight-
ing on unit managers
11. Unit Managers: Configure the Care Area
unit manager to display specific The care area determines which beds
beds. and patients a Unit Manager shows. It
also determines what options appear to
users when they right-click a bed or pa-
tient.
12. Unit Managers: Identify where They are used in the Unit Manager Con-
View records records are used figuration
13. Unit Managers: Manager Configu- The manager configuration is the Unit
ration Manager itself. It determines which units
(DEP) should be managed in the Unit
Manager. It contains care areas and
views.
14. Unit Managers: Which of the fol- B. Pending Incoming Transfers
lowing care area types require a D. Pending Admission
view record to be set with the care
area. Pending Admission and Pending Incom-
A. Patient and Beds ing Transfers care areas require the View
B. Pending in coming Transfers Field. Care area that represent rooms
C. Rooms Only and bed do not require this field, and can
D. Pending Admissions use the "Default View for bedded Patient
Care Area" set at the Manager Configu-
ration level if left blank.
15.
QUESTIONS AND CORRECT VERIFIED ANSWERS ALREADY GRADED
1
Study online at https://quizlet.com/_g6h59v
1. Create and Configure Facili- These settings are found in Hyperspace
ty Structure: Configure depart- > Registration/Grand Central System
ments to show the Hospital Ac- Definitions > Service Area > Hospital Ac-
counts form count Settings. By clicking Dept Settings
and selecting the departments, it sets an
item in the department record.
2. Which of the following units re- Hospital OutPatient - Unit Type is re-
quire the Unit Type Field to be quired for any of the specialty units listed
set? in the options, such as Hospital Outpa-
tient. If this setting is blank for certain
specialty units, they won't fully function.
3. Create and Configure Facility In Bed Board: Always include
Structure: Configure a bed to This bed will appear in Bed Planning
show pertinent information to whether it is occupied or unoccupied.
bed planners In Census: Yes
This bed is included in census statistics
reporting.
4. Create and Configure Facility True
Structure: Attaching two revenue
locations to the same parent rev-
enue location can allow them to
share hospital accounts across
revenue locations
5. Create and Configure Facility ADT Unit/Department Settings
Structure: On which screen in the Unit Type: Hospital Outpatient.
department master file can you
specify that the department is an
HOD?
6. Create and Configure Facility D. The facility (for the majority's setting)
Structure: and A. Hospital A-B (for the overrides).
An organization has one service Though SA could be an option, it would
area with several hospitals. Hos- be best if it is set at the most general
pital A and B need a setting con- level (Facility) in case the organization
, GRAND CENTRAL 201 ADMIN EXAM LATEST 2024-2025 WITH 309 ACTU
QUESTIONS AND CORRECT VERIFIED ANSWERS ALREADY GRADED
1
Study online at https://quizlet.com/_g6h59v
figured one way. Hospital C, Hos- creates new service areas so that it will
pital D, Hospital E, and Hospital NOT need to be reset at that additional
F need the same setting config- service area.
ured a different way. This setting
is available at the department,
revenue location, service area,
and facility levels. Given this in-
formation, which records should
you edit to configure the set-
tings that all hospitals get what
they need? Configure the setting
in the fewest number of records
possible. Choose ALL answers
that apply.
A. Hospital A-B
B. Hospital C-F
C. The service area
D. The facility
7. Create and Configure Facility True
Structure:
The parent revenue location is
the lowest level of the facility
structure for reporting for hospi-
tal billing AR, payments, adjust-
ments and refunds.
8. Create and Configure Facility If you leave the Parent Hospital/ Clinic
Structure: Area field blank, you won't find your unit
List the setting that determines in Bed Administration, a Hyperspace tool
where a unit appears in Bed Ad- used to build and maintain rooms and
ministration beds
9. Grand Central Settings Overview: If a setting is configured at multiple lev-
Define the rule of specificity els of the setting's hierarchy, the system
uses the most specific level's setting. If
nothing is set at that level, the system
looks to the next most specific level's
, GRAND CENTRAL 201 ADMIN EXAM LATEST 2024-2025 WITH 309 ACTU
QUESTIONS AND CORRECT VERIFIED ANSWERS ALREADY GRADED
1
Study online at https://quizlet.com/_g6h59v
setting.
Facility (MORE GENERAL)
Service Area
Revenue Location
Department/Units (MOST SPECIFIC)
10. Unit Managers: Identify the type VIEW RECORD
of record that controls highlight-
ing on unit managers
11. Unit Managers: Configure the Care Area
unit manager to display specific The care area determines which beds
beds. and patients a Unit Manager shows. It
also determines what options appear to
users when they right-click a bed or pa-
tient.
12. Unit Managers: Identify where They are used in the Unit Manager Con-
View records records are used figuration
13. Unit Managers: Manager Configu- The manager configuration is the Unit
ration Manager itself. It determines which units
(DEP) should be managed in the Unit
Manager. It contains care areas and
views.
14. Unit Managers: Which of the fol- B. Pending Incoming Transfers
lowing care area types require a D. Pending Admission
view record to be set with the care
area. Pending Admission and Pending Incom-
A. Patient and Beds ing Transfers care areas require the View
B. Pending in coming Transfers Field. Care area that represent rooms
C. Rooms Only and bed do not require this field, and can
D. Pending Admissions use the "Default View for bedded Patient
Care Area" set at the Manager Configu-
ration level if left blank.
15.
