CSX CONDUCTOR TRAINING , WEEK 1
TEST EXAM REVIEW|LATEST EXPERT
PREMIUM UPDATE 2024-2025|100
BRAND NEW EXAM QUESTIONS AND
CORRECT ANSWERS,ALL GRADED
A+|GUARANTEED SUCCESS|LATEST
UPDATE 2024-2025
Who is Responsible for making Pay Claims? - ANSWER✅✅Ranking Employee or
Employee to be paid
What is the Hand Signal for Reduce Speed? - ANSWER✅✅Arm out horizontal over
the track
Which of the following are allowed by the Rulebook? - ANSWER✅✅Always take the
safe course
What is the Hand Signal for Release Air Brakes? - ANSWER✅✅Hand held overhead
when Equipment is Standing
Who authorizes a Utility Employee to join an Assigned Crew? - ANSWER✅✅Ranking
Employee
, What is the normal position for a switch or derail? - ANSWER✅✅In the "on" or
derailing position
Before lining a switch or derail, an employee must? - ANSWER✅✅1) Ensure that
any preceeding movement has passed clearance points. 2) Ensure that the device is
not locked, spiked, or tagged "out of service"
If a lock is found to be defective or missing on a main line switch or derail an
employee must? - ANSWER✅✅1) Report device to Trainmaster/Dispatcher. 2) Be
governed by the instructions of said Dispatcher/Trainmaster
When an Employee determines that a switch or derail is defective, the employee
must? - ANSWER✅✅1) Not operate the device. 2) Report device to Proper Authority
You are standing in a yard using multiple switches on long shoves. After lining each
switch an employee should check what? - ANSWER✅✅That all switch points are
flush and aligned properly.
When using a portable radio in a shove move, Employee instructions must specify
what? - ANSWER✅✅1) Employee is clear of all tracks. 2) Switches and Derails are all
properly aligned for the move
What is a System of Tracks, other than main tracks and sidings, used for making up
trains for storing cars and other purposes? - ANSWER✅✅Yard
By Definition, what is the location in a turnout where it is unsafe to pass on an
adjacent track? - ANSWER✅✅Clearance Point
What is a track connection between two adjacent tracks, not necessarily parallel,
consisting of two switches whose primary purpose is to allow crossing from one
track to another? - ANSWER✅✅Crossover
What is a device of "Necessary Track" used to change from one track to another? -
ANSWER✅✅Switch
What is the the minimum distance you must stand from a switch or derail involved
in the route of a passing train? - ANSWER✅✅30'
When crossing tracks with standing equipment, what safety precautions must be
taken? - ANSWER✅✅1) Stop and check both directions. 2) Do not cross within 25' of
standing equipment.
In addition to facing the equipment and maintaining 3 points of contact, what other
steps must be taken when disembarking moving equipment? - ANSWER✅✅1) Avoid
getting off equipment in an unsafe area. 2)Stop at the bottom rung and observe
where you will be placing your foot.
TEST EXAM REVIEW|LATEST EXPERT
PREMIUM UPDATE 2024-2025|100
BRAND NEW EXAM QUESTIONS AND
CORRECT ANSWERS,ALL GRADED
A+|GUARANTEED SUCCESS|LATEST
UPDATE 2024-2025
Who is Responsible for making Pay Claims? - ANSWER✅✅Ranking Employee or
Employee to be paid
What is the Hand Signal for Reduce Speed? - ANSWER✅✅Arm out horizontal over
the track
Which of the following are allowed by the Rulebook? - ANSWER✅✅Always take the
safe course
What is the Hand Signal for Release Air Brakes? - ANSWER✅✅Hand held overhead
when Equipment is Standing
Who authorizes a Utility Employee to join an Assigned Crew? - ANSWER✅✅Ranking
Employee
, What is the normal position for a switch or derail? - ANSWER✅✅In the "on" or
derailing position
Before lining a switch or derail, an employee must? - ANSWER✅✅1) Ensure that
any preceeding movement has passed clearance points. 2) Ensure that the device is
not locked, spiked, or tagged "out of service"
If a lock is found to be defective or missing on a main line switch or derail an
employee must? - ANSWER✅✅1) Report device to Trainmaster/Dispatcher. 2) Be
governed by the instructions of said Dispatcher/Trainmaster
When an Employee determines that a switch or derail is defective, the employee
must? - ANSWER✅✅1) Not operate the device. 2) Report device to Proper Authority
You are standing in a yard using multiple switches on long shoves. After lining each
switch an employee should check what? - ANSWER✅✅That all switch points are
flush and aligned properly.
When using a portable radio in a shove move, Employee instructions must specify
what? - ANSWER✅✅1) Employee is clear of all tracks. 2) Switches and Derails are all
properly aligned for the move
What is a System of Tracks, other than main tracks and sidings, used for making up
trains for storing cars and other purposes? - ANSWER✅✅Yard
By Definition, what is the location in a turnout where it is unsafe to pass on an
adjacent track? - ANSWER✅✅Clearance Point
What is a track connection between two adjacent tracks, not necessarily parallel,
consisting of two switches whose primary purpose is to allow crossing from one
track to another? - ANSWER✅✅Crossover
What is a device of "Necessary Track" used to change from one track to another? -
ANSWER✅✅Switch
What is the the minimum distance you must stand from a switch or derail involved
in the route of a passing train? - ANSWER✅✅30'
When crossing tracks with standing equipment, what safety precautions must be
taken? - ANSWER✅✅1) Stop and check both directions. 2) Do not cross within 25' of
standing equipment.
In addition to facing the equipment and maintaining 3 points of contact, what other
steps must be taken when disembarking moving equipment? - ANSWER✅✅1) Avoid
getting off equipment in an unsafe area. 2)Stop at the bottom rung and observe
where you will be placing your foot.
