Mechatronics 1 Exam Study Guide Questions With 100%
Correct Answers | Verified | Latest Update
True ✔✔✔Pick and Place automation
Four manual discrete logic output ✔✔✔Indicator lamps
Category 0 ✔✔✔E stop
Lock ✔✔✔Everyone must have their own
Safety checks ✔✔✔First step to power up
A and B ✔✔✔Mechatronics operator safety rules
Machine movements ✔✔✔
False ✔✔✔Push button switches or manual discreet logic output devices
Electrical signal ✔✔✔Limit switch
Assemble parts ✔✔✔Automated assembly stations
Where the actuator stop is located or slightly before ✔✔✔Limit switches should be adjusted so the
contacts open or close just at the point
, Clockwise to decrease counterclockwise to increase ✔✔✔To adjust actuator speed using flow control
valves turn the flow control valve
One for each direction forward motor starter and reverse ✔✔✔A motor that moves both forward and
reverse requires
True ✔✔✔Mechanical stops can be used to accurately position a Pneumatics cylinder
True ✔✔✔Digital I/O interface module connect a PLCs input and output to terminal blocks on printed
circuit boards via a special pre-wired cable
Manual ✔✔✔__________ mold is most often used during machine set up in meetings to test various
parts of the machine and make adjustments
Two position spring return ✔✔✔Three types of electoral pneumatic valves are three positions being
returned to position to detented and ___________.
Hall effect, inductive, capacitive ✔✔✔These three sensors all have short sensing ranges and since the
presence of an object as well as different types of material
Servo robot ✔✔✔Three types of material feeding system is used in manufacturing or a SRS, __________
, and nonservo pick and Place manipulators
X and Z ✔✔✔Hate to ask this pic in place manipulator has two actuators which typically move in the
________ planes.
Gravity feed chute or magazine ✔✔✔A powered parts feeder typically includes a __________, a cylinder
to push the part out of the pick up location, and a sensor to indicate when there are no more parts
Cup size and the amount of vacuum applied ✔✔✔The gripping or holding force of the vacuum gripper
relies on
Correct Answers | Verified | Latest Update
True ✔✔✔Pick and Place automation
Four manual discrete logic output ✔✔✔Indicator lamps
Category 0 ✔✔✔E stop
Lock ✔✔✔Everyone must have their own
Safety checks ✔✔✔First step to power up
A and B ✔✔✔Mechatronics operator safety rules
Machine movements ✔✔✔
False ✔✔✔Push button switches or manual discreet logic output devices
Electrical signal ✔✔✔Limit switch
Assemble parts ✔✔✔Automated assembly stations
Where the actuator stop is located or slightly before ✔✔✔Limit switches should be adjusted so the
contacts open or close just at the point
, Clockwise to decrease counterclockwise to increase ✔✔✔To adjust actuator speed using flow control
valves turn the flow control valve
One for each direction forward motor starter and reverse ✔✔✔A motor that moves both forward and
reverse requires
True ✔✔✔Mechanical stops can be used to accurately position a Pneumatics cylinder
True ✔✔✔Digital I/O interface module connect a PLCs input and output to terminal blocks on printed
circuit boards via a special pre-wired cable
Manual ✔✔✔__________ mold is most often used during machine set up in meetings to test various
parts of the machine and make adjustments
Two position spring return ✔✔✔Three types of electoral pneumatic valves are three positions being
returned to position to detented and ___________.
Hall effect, inductive, capacitive ✔✔✔These three sensors all have short sensing ranges and since the
presence of an object as well as different types of material
Servo robot ✔✔✔Three types of material feeding system is used in manufacturing or a SRS, __________
, and nonservo pick and Place manipulators
X and Z ✔✔✔Hate to ask this pic in place manipulator has two actuators which typically move in the
________ planes.
Gravity feed chute or magazine ✔✔✔A powered parts feeder typically includes a __________, a cylinder
to push the part out of the pick up location, and a sensor to indicate when there are no more parts
Cup size and the amount of vacuum applied ✔✔✔The gripping or holding force of the vacuum gripper
relies on
