Troubleshooting Wireless Local Area Network Installations
With Complete Solutions
What causes the hidden node problem in a WLAN? - ANSWER This occurs when a client
or node can receive the signals an AP is transmitting but some obstacle blocks
reception of the signals from other clients that are connected to the network.
How does one do troubleshooting for a hidden node? - ANSWER Test for degraded data
throughput at all locations of the clients.
How would you know for certain that a hidden node is present on the network? ANSWER
Turn on request to send/clear to send (RTS/CTS) protocol and measure increased
network data throughput.
Which of the following is true when an access point (AP) is receiving a distant client's
signal at a lower power level than that of a nearer client? ANSWER Near/Far.
Which of the following is the best option to use to troubleshoot the near/far problem?
ANSWER Check the location of the stations (clients) on the network.
You want to create a wireless network that can support significantly more users than
one IEEE 802.11b AP. What is a valid solution? - SOLUTION Use IEEE 802.11-compliant
equipment in the 5 GHz U-NII bands where there are many more available
non-overlapping channels.
What test instrument is used to locate and quantify interfering narrowband radio
frequency RF signals in an IEEE 802.11 WLAN among others? - ANSWER A spectrum
analyzer.
What causes co-channel interference in a WLAN? - ANSWER Overlapping of the signal
coverage areas of access points AP or various WLANs operating on the same channels.
With Complete Solutions
What causes the hidden node problem in a WLAN? - ANSWER This occurs when a client
or node can receive the signals an AP is transmitting but some obstacle blocks
reception of the signals from other clients that are connected to the network.
How does one do troubleshooting for a hidden node? - ANSWER Test for degraded data
throughput at all locations of the clients.
How would you know for certain that a hidden node is present on the network? ANSWER
Turn on request to send/clear to send (RTS/CTS) protocol and measure increased
network data throughput.
Which of the following is true when an access point (AP) is receiving a distant client's
signal at a lower power level than that of a nearer client? ANSWER Near/Far.
Which of the following is the best option to use to troubleshoot the near/far problem?
ANSWER Check the location of the stations (clients) on the network.
You want to create a wireless network that can support significantly more users than
one IEEE 802.11b AP. What is a valid solution? - SOLUTION Use IEEE 802.11-compliant
equipment in the 5 GHz U-NII bands where there are many more available
non-overlapping channels.
What test instrument is used to locate and quantify interfering narrowband radio
frequency RF signals in an IEEE 802.11 WLAN among others? - ANSWER A spectrum
analyzer.
What causes co-channel interference in a WLAN? - ANSWER Overlapping of the signal
coverage areas of access points AP or various WLANs operating on the same channels.