FIRE FIGHTER 1 REAL EXAM AND STUDY GUIDE 200
QUESTIONS AND CORRECT ANSWERS 2024
LATEST//ALREADY GRADED A+
A drag rescue device (DRD) is a component of the:
SCBA harness.
PASS device.
protective coat.
protective pants. - CORRECT ANSWER-protective coat
A structural firefighting PPE ensemble includes which specific piece of equipment?
Thermal imager
Portable radio
Safety harness
PASS device - CORRECT ANSWER-PASS device
How much of the body is structural firefighting personal protective equipment (PPE) designed to cover?
All but the wrists
All but the neck
Full body coverage
All but the ears - CORRECT ANSWER-Full body coverage
PPE exposed to hazardous conditions should undergo an initial reduction of contaminants __________.
after response personnel have thoroughly showered and changed clothing.
immediately upon returning to the station.
after apparatus and equipment have been restored to operational readiness.
at the scene before returning to the station. - CORRECT ANSWER-at the scene before returning to the
station.
,Recent studies have identified which hazard related to the use of protective hoods?
Transfer of carcinogens from the hood to the skin.
Increased physiological heat load.
Reduced ability of the wearer to detect ambient thermal hazards.
Greater frequency of SCBA facepiece seal leaks. - CORRECT ANSWER-Transfer of carcinogens from the
hood to the skin.
The multilayered or quilted layer of structural firefighting protective clothing is the:
vapor barrier.
absorbent liner.
liner.
thermal barrier. - CORRECT ANSWER-thermal barrier.
The outer shell of structural firefighting protective clothing is constructed of a flame-resistant materials
such as Nomex, Kevlar or _________?
Durex
PBI
Thermax
Treated cotton duck - CORRECT ANSWER-PBI
The primary function of a fire helmet's __________ is intended to provide thermal protection.
inner liner
suspension system
outer shell
vapor barrier - CORRECT ANSWER-inner liner
Turnout coats and trousers have a protective system that consists of _____ layers.
2
5
,3
4 - CORRECT ANSWER-3
What is a requirement for structural firefighting boots?
Slip-resistant sole
Rubber upper
Pull-on design
Zipper closure - CORRECT ANSWER-Slip-resistant sole
What is the primary function of the moisture barrier in structural firefighting PPE?
Prevent liquids and vapors from reaching the skin
Promote evaporation of perspiration
Prevent exposure to pathogens
Protect the body from high temperatures - CORRECT ANSWER-Prevent liquids and vapors from reaching
the skin
What is the term for the lower part of a protective hood?
Bib
Drape
Collar
Neck - CORRECT ANSWER-Bib
Which component of structural firefighting protective clothing is critical for protecting the body from
steam burns?
Thermal barrier
Moisture barrier
Outer shell
Insulation - CORRECT ANSWER-Moisture barrier
, Which is an acceptable location for PPE that has undergone decontamination?
Sleeping area
None of these is correct.
Vehicle cab
Living area - CORRECT ANSWER-None of these is correct.
Which item is an optional component of the structural firefighting protective ensemble?
Hearing protection
Protective hood
Personal alert safety system
Self-contained breathing apparatus - CORRECT ANSWER-Hearing protection
Which NFPA standard deals with protective ensembles for structural and proximity firefighting?
1981
1472
1971
1500 - CORRECT ANSWER-1971
Which part of the structural firefighting PPE ensemble is designed to protect the neck and ears?
The protective hood
The coat collar
The bib
The SCBA mask - CORRECT ANSWER-The protective hood
Which piece of equipment must be worn with structural firefighting PPE and SCBA?
Bail-out rope
Escape harness
PASS device
Buddy-breather - CORRECT ANSWER-PASS device
QUESTIONS AND CORRECT ANSWERS 2024
LATEST//ALREADY GRADED A+
A drag rescue device (DRD) is a component of the:
SCBA harness.
PASS device.
protective coat.
protective pants. - CORRECT ANSWER-protective coat
A structural firefighting PPE ensemble includes which specific piece of equipment?
Thermal imager
Portable radio
Safety harness
PASS device - CORRECT ANSWER-PASS device
How much of the body is structural firefighting personal protective equipment (PPE) designed to cover?
All but the wrists
All but the neck
Full body coverage
All but the ears - CORRECT ANSWER-Full body coverage
PPE exposed to hazardous conditions should undergo an initial reduction of contaminants __________.
after response personnel have thoroughly showered and changed clothing.
immediately upon returning to the station.
after apparatus and equipment have been restored to operational readiness.
at the scene before returning to the station. - CORRECT ANSWER-at the scene before returning to the
station.
,Recent studies have identified which hazard related to the use of protective hoods?
Transfer of carcinogens from the hood to the skin.
Increased physiological heat load.
Reduced ability of the wearer to detect ambient thermal hazards.
Greater frequency of SCBA facepiece seal leaks. - CORRECT ANSWER-Transfer of carcinogens from the
hood to the skin.
The multilayered or quilted layer of structural firefighting protective clothing is the:
vapor barrier.
absorbent liner.
liner.
thermal barrier. - CORRECT ANSWER-thermal barrier.
The outer shell of structural firefighting protective clothing is constructed of a flame-resistant materials
such as Nomex, Kevlar or _________?
Durex
PBI
Thermax
Treated cotton duck - CORRECT ANSWER-PBI
The primary function of a fire helmet's __________ is intended to provide thermal protection.
inner liner
suspension system
outer shell
vapor barrier - CORRECT ANSWER-inner liner
Turnout coats and trousers have a protective system that consists of _____ layers.
2
5
,3
4 - CORRECT ANSWER-3
What is a requirement for structural firefighting boots?
Slip-resistant sole
Rubber upper
Pull-on design
Zipper closure - CORRECT ANSWER-Slip-resistant sole
What is the primary function of the moisture barrier in structural firefighting PPE?
Prevent liquids and vapors from reaching the skin
Promote evaporation of perspiration
Prevent exposure to pathogens
Protect the body from high temperatures - CORRECT ANSWER-Prevent liquids and vapors from reaching
the skin
What is the term for the lower part of a protective hood?
Bib
Drape
Collar
Neck - CORRECT ANSWER-Bib
Which component of structural firefighting protective clothing is critical for protecting the body from
steam burns?
Thermal barrier
Moisture barrier
Outer shell
Insulation - CORRECT ANSWER-Moisture barrier
, Which is an acceptable location for PPE that has undergone decontamination?
Sleeping area
None of these is correct.
Vehicle cab
Living area - CORRECT ANSWER-None of these is correct.
Which item is an optional component of the structural firefighting protective ensemble?
Hearing protection
Protective hood
Personal alert safety system
Self-contained breathing apparatus - CORRECT ANSWER-Hearing protection
Which NFPA standard deals with protective ensembles for structural and proximity firefighting?
1981
1472
1971
1500 - CORRECT ANSWER-1971
Which part of the structural firefighting PPE ensemble is designed to protect the neck and ears?
The protective hood
The coat collar
The bib
The SCBA mask - CORRECT ANSWER-The protective hood
Which piece of equipment must be worn with structural firefighting PPE and SCBA?
Bail-out rope
Escape harness
PASS device
Buddy-breather - CORRECT ANSWER-PASS device
