• Wrong document? Swap it for free
  • Written by students who passed
  • Immediately available after payment
  • Read online or as PDF
Sell
Where do you study
Your language
Document preview thumbnail
Preview 3 out of 17 pages
Exam (elaborations)

Sample Questions RBC With Complete Solutions.

Document preview thumbnail
Preview 3 out of 17 pages

Sample Questions RBC With Complete Solutions. A wall on a drawing with a scale of 1/4" =1-foot measures 5 1/2". How long is the wall in feet? - correct answer. 22' - (5 1/2= 5 2/4 5X4=20 +2 =22') A line on a drawing is composed of long and short dashes. What is the name of this line? - correct answer. A centerline Most construction lumber is cut ____ sawn - correct answer. Flat sawn What is the minimum nominal thickness of the ridge board? - correct answer. 1 inch How Many jack studs will be required for a 2-2x12 header in an interior bearing wall supporting one floor only, building width of 28', and a span of 7'-0" - correct answer. 2 Jack stud required What is the maximum hole that may be cut in a 2X12 nominal floor joist? - correct answer. 4" Inches What size strap is required if a top plate is notched more than 50% of its width? - correct answer. 16 gage in thickness and 1 1/2" wide The end of a wood joist must bear on a wood beam by at least _____inches? - correct answer. 1 1/2 The dimension of fine aggregate in concrete is up to ___ " in diameter and coarse aggregate is larger than_____". - correct answer. 1/4 for both Concrete gains most of its strength in how many days? - correct answer. 28 days In what section of the span of a floor joist is it NOT permitted to cut a notch? - correct answer. Middle third What material is required for the door of an ash dump cleanout? - correct answer. Ferrous metal or masonry A cricket is required when the width of a chimney is greater than _____inches. - correct answer. 30" In what direction must the access gate of a pool swing? - correct answer. Outwards What is the minimum ceiling height over a bathtub? - correct answer. 6'-8" What is the maximum unsupported height of a pier consisting of 12"X16" hollow core blocks filled with type S mortar? - correct answer. 120" What is the least outside circular diameter of a handrail? - correct answer. 1 1/4" Insulation shall have a smoke-developed index not to exceed? - correct answer. Not to exceed 450 From where must a smoke alarm draw its primary power? - correct answer. building wiring What is the live load of an attic with habitable space? - correct answer. 30 # What is the required width and height of the egress door?___X___? - correct answer. 32X78 The header is an exterior bearing wall of a building that is 28 feet wide, 50 pound snow load, supports a roof, ceiling and one center bearing floor. If 3-2X12S are used, what is the allowable span? - correct answer. 8'-0" How far into concrete must anchor bolts extend? - correct answer. 7" What is the maximum height of the backfill for a play masonry foundation wall, 8" high and 8" thick, is constructed in type GW soil? - correct answer. 5' If a footing is 18" wide, what is the maximum width of a foundation wall placed on this footing? - correct answer. 14" What is the slope allowance for the bottom of a footing___in ____ - correct answer. 1 unit in 10 = 10% Slope How far must foundation gravel extend above the footing drain? - correct answer. 6" What distance from a wall must be base of a ladder be placed that has a working length of 16'? - correct answer. 4' -it is 1/4 the working length What is the term for the basic starting point for the layout of a building? - correct answer. benchmark What is required to vent a hip roof? - correct answer. soffit and ridge vents What is the overlap in inches of nominal 8" Palin-bevel wood siding board? - correct answer. 1 1/4" plain bevel wood siding What is the nailing requirement for a plywood soffit? - correct answer. 4D nails spaced 6" apart What is the spacing In inches pf veneer ties? - correct answer. 36 inches What is the minimum penetration of a drywall screw into wood ? - correct answer. 5/8" What is the minimum width of a stairway? - correct answer. 36" What is the most often used hinge for hanging residential doors? - correct answer. loose pin butt mortise hinge What size window is required in a bathroom if there is no mechanical ventilation? - correct answer. 3 square feet What is the minimum width of a hallway? - correct answer. 3' In Virginia, what are the R Value insulation requirements for the ceiling, wall, and floor. - correct answer. 49, 20, 19 The under-floor space vents must be covered with material with a least dimension of? - correct answer. 1/4" What is the maximum slump of concrete placed in removable forms? - correct answer. 6" The end joints of double top plates must be offset at least________? - correct answer. 24" What's the required clearance of wood siding from the ground before it is required to be preservative treated ? - correct answer. 6" What is required to support brick veneer above openings in exterior walls? - correct answer. Lintel What is the minimum stroke width of site address numbers? - correct answer. 1/2"

Content preview

Sample Questions RBC With Complete
Solutions.


A wall on a drawing with a scale of 1/4" =1-foot measures 5 1/2". How long is the wall in
feet? - correct answer. 22' - (5 1/2= 5 2/4 5X4=20 +2 =22')

A line on a drawing is composed of long and short dashes. What is the name of this
line? - correct answer. A centerline

Most construction lumber is cut ____ sawn - correct answer. Flat sawn

What is the minimum nominal thickness of the ridge board? - correct answer. 1 inch

How Many jack studs will be required for a 2-2x12 header in an interior bearing wall
supporting one floor only, building width of 28', and a span of 7'-0" - correct answer.
2 Jack stud required

What is the maximum hole that may be cut in a 2X12 nominal floor joist? - correct
answer. 4" Inches

What size strap is required if a top plate is notched more than 50% of its width? -
correct answer. 16 gage in thickness and 1 1/2" wide

The end of a wood joist must bear on a wood beam by at least _____inches? - correct
answer. 1 1/2

The dimension of fine aggregate in concrete is up to ___ " in diameter and coarse
aggregate is larger than_____". - correct answer. 1/4 for both

Concrete gains most of its strength in how many days? - correct answer. 28 days

In what section of the span of a floor joist is it NOT permitted to cut a notch? - correct
answer. Middle third

,What material is required for the door of an ash dump cleanout? - correct answer.
Ferrous metal or masonry

A cricket is required when the width of a chimney is greater than _____inches. - correct
answer. 30"

In what direction must the access gate of a pool swing? - correct answer. Outwards

What is the minimum ceiling height over a bathtub? - correct answer. 6'-8"

What is the maximum unsupported height of a pier consisting of 12"X16" hollow core
blocks filled with type S mortar? - correct answer. 120"

What is the least outside circular diameter of a handrail? - correct answer. 1 1/4"

Insulation shall have a smoke-developed index not to exceed? - correct answer. Not
to exceed 450

From where must a smoke alarm draw its primary power? - correct answer. building
wiring

What is the live load of an attic with habitable space? - correct answer. 30 #

What is the required width and height of the egress door?___X___? - correct answer.
32X78

The header is an exterior bearing wall of a building that is 28 feet wide, 50 pound snow
load, supports a roof, ceiling and one center bearing floor. If 3-2X12S are used, what is
the allowable span? - correct answer. 8'-0"

How far into concrete must anchor bolts extend? - correct answer. 7"

What is the maximum height of the backfill for a play masonry foundation wall, 8" high
and 8" thick, is constructed in type GW soil? - correct answer. 5'

If a footing is 18" wide, what is the maximum width of a foundation wall placed on this
footing? - correct answer. 14"

What is the slope allowance for the bottom of a footing___in ____ - correct answer.
1 unit in 10 = 10% Slope

How far must foundation gravel extend above the footing drain? - correct answer. 6"

What distance from a wall must be base of a ladder be placed that has a working length
of 16'? - correct answer. 4' -it is 1/4 the working length

, What is the term for the basic starting point for the layout of a building? - correct
answer. benchmark

What is required to vent a hip roof? - correct answer. soffit and ridge vents

What is the overlap in inches of nominal 8" Palin-bevel wood siding board? - correct
answer. 1 1/4" plain bevel wood siding

What is the nailing requirement for a plywood soffit? - correct answer. 4D nails
spaced 6" apart

What is the spacing In inches pf veneer ties? - correct answer. 36 inches

What is the minimum penetration of a drywall screw into wood ? - correct answer.
5/8"

What is the minimum width of a stairway? - correct answer. 36"

What is the most often used hinge for hanging residential doors? - correct answer.
loose pin butt mortise hinge

What size window is required in a bathroom if there is no mechanical ventilation? -
correct answer. 3 square feet

What is the minimum width of a hallway? - correct answer. 3'

In Virginia, what are the R Value insulation requirements for the ceiling, wall, and floor. -
correct answer. 49, 20, 19

The under-floor space vents must be covered with material with a least dimension of? -
correct answer. 1/4"

What is the maximum slump of concrete placed in removable forms? - correct answer.
6"

The end joints of double top plates must be offset at least________? - correct answer.
24"

What's the required clearance of wood siding from the ground before it is required to be
preservative treated ? - correct answer. 6"

What is required to support brick veneer above openings in exterior walls? - correct
answer. Lintel

What is the minimum stroke width of site address numbers? - correct answer. 1/2"

Document information

Uploaded on
November 4, 2024
Number of pages
17
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers
$11.49

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
Lectsadh
3.9
(79)
Sold
430
Followers
106
Items
13449
Last sold
3 days ago



Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions