Construction Safety Test Already Verified A+
True or False:
Safety is the condition of being safe from risk or danger ✔️✔️True
True or False:
Accidents are a minor cause of death and injury for persons 1 to 37 years of age ✔️✔️True
True or False:
Shop safety is not an important issue for students and teachers. ✔️✔️False
True or False:
Students should learn to recognize hazardous situations and how to protect themselves ✔️✔️True
What does PPE stand for? ✔️✔️Personal Protection Equipment
Name the three types of protection PPE's provide: ✔️✔️1) Glasses.
2) Clothing Protection.
3) Hearing Protection.
What percentage of all injuries occur to the eyes?
a) 15%.
b) 35%.
c) 50%.
d) 100%. ✔️✔️a) 15%.
What mark appears on the frame of industrial quality safety glasses?
a) z-28.
b) XR-7.
,c) Z87.
d) B-52 ✔️✔️C) Z87
What should persons who wear prescription glasses do to protect their eyesight?
a) nothing - glasses are adequate protection.
b) wear goggles over glasses.
c) have prescription safety glasses made.
d) either b) or c). ✔️✔️d) either B) or C)
Under which of the following circumstances is hearing most likely to be damaged?
a) loud noise - short period.
b) loud noise - long period.
c) low noise - long period.
d) low noise - short period. ✔️✔️b) loud noise - long period
True or False:
Face shields provide excellent eye protection. ✔️✔️False
True or False:
Noise from some types of equipment can exceed 120 decibels. ✔️✔️true
True or False:
Ear muffs should be worn when using a specific tool for a short period. ✔️✔️True
True or False:
When working in the shop, short sleeves, shorts, and lace up shoes are acceptable. ✔️✔️False
True or False:
, When welding, polyester and rayon offer better protection than wool or cotton? ✔️✔️False
True or False:
Gloves should be worn at all times when working in the shop ✔️✔️False
True or False:
It is important to develop safe work habits ✔️✔️True
True or False:
Always check the work area for potential hazards ✔️✔️True
True or False:
It is always recommended to use the appropriate tool for the job. ✔️✔️True
True or False:
It is NOT necessary that the equipment be in good working condition or adjusted properly ✔️✔️False
Name the four types of potential shop hazards ✔️✔️1) mechanical.
2) chemical.
3) electrical.
4) fire.
Many tools have sharp edges that are also known as what? ✔️✔️pinch points
what two purposes do guards on table saws serve? ✔️✔️1) Contact Hitting.
2) Anti-kickback protection
Which of the following is supplied by material safety data sheets?
True or False:
Safety is the condition of being safe from risk or danger ✔️✔️True
True or False:
Accidents are a minor cause of death and injury for persons 1 to 37 years of age ✔️✔️True
True or False:
Shop safety is not an important issue for students and teachers. ✔️✔️False
True or False:
Students should learn to recognize hazardous situations and how to protect themselves ✔️✔️True
What does PPE stand for? ✔️✔️Personal Protection Equipment
Name the three types of protection PPE's provide: ✔️✔️1) Glasses.
2) Clothing Protection.
3) Hearing Protection.
What percentage of all injuries occur to the eyes?
a) 15%.
b) 35%.
c) 50%.
d) 100%. ✔️✔️a) 15%.
What mark appears on the frame of industrial quality safety glasses?
a) z-28.
b) XR-7.
,c) Z87.
d) B-52 ✔️✔️C) Z87
What should persons who wear prescription glasses do to protect their eyesight?
a) nothing - glasses are adequate protection.
b) wear goggles over glasses.
c) have prescription safety glasses made.
d) either b) or c). ✔️✔️d) either B) or C)
Under which of the following circumstances is hearing most likely to be damaged?
a) loud noise - short period.
b) loud noise - long period.
c) low noise - long period.
d) low noise - short period. ✔️✔️b) loud noise - long period
True or False:
Face shields provide excellent eye protection. ✔️✔️False
True or False:
Noise from some types of equipment can exceed 120 decibels. ✔️✔️true
True or False:
Ear muffs should be worn when using a specific tool for a short period. ✔️✔️True
True or False:
When working in the shop, short sleeves, shorts, and lace up shoes are acceptable. ✔️✔️False
True or False:
, When welding, polyester and rayon offer better protection than wool or cotton? ✔️✔️False
True or False:
Gloves should be worn at all times when working in the shop ✔️✔️False
True or False:
It is important to develop safe work habits ✔️✔️True
True or False:
Always check the work area for potential hazards ✔️✔️True
True or False:
It is always recommended to use the appropriate tool for the job. ✔️✔️True
True or False:
It is NOT necessary that the equipment be in good working condition or adjusted properly ✔️✔️False
Name the four types of potential shop hazards ✔️✔️1) mechanical.
2) chemical.
3) electrical.
4) fire.
Many tools have sharp edges that are also known as what? ✔️✔️pinch points
what two purposes do guards on table saws serve? ✔️✔️1) Contact Hitting.
2) Anti-kickback protection
Which of the following is supplied by material safety data sheets?
