What is the primary unit of measure for electric resistance?
The primary unit of measure for electric resistance is the ohm ✔✔.
What is the process of heat treatment?
Heat treatment is a process used to alter the physical and sometimes chemical properties of a material,
often to improve its hardness or strength ✔✔.
What is a crystal lattice?
A crystal lattice is a three-dimensional arrangement of atoms or molecules in a crystalline material ✔✔.
What does the term “ductility” refer to?
Ductility refers to the ability of a material to deform under tensile stress, often characterized by its
ability to be stretched into a wire ✔✔.
What is the main purpose of alloying metals?
The main purpose of alloying metals is to improve their mechanical properties and resistance to
corrosion ✔✔.
What is the difference between ferrous and non-ferrous metals?
Ferrous metals contain iron, while non-ferrous metals do not ✔✔.
What is the primary characteristic of ceramics?
The primary characteristic of ceramics is their hardness and resistance to heat and chemical corrosion
✔✔.
What does "hardness" measure in materials?
Hardness measures a material's resistance to deformation or scratching ✔✔.
, What is the significance of the grain structure in metals?
The grain structure in metals affects their strength, ductility, and overall performance ✔✔.
What are the typical applications of polymers?
Polymers are commonly used in packaging, textiles, and insulation due to their versatility and
lightweight properties ✔✔.
What is a thermoplastic?
A thermoplastic is a type of polymer that becomes pliable when heated and solidifies upon cooling ✔✔.
What role do additives play in plastics?
Additives are used in plastics to enhance properties like flexibility, color, and durability ✔✔.
What is the main advantage of using composite materials?
The main advantage of composite materials is their high strength-to-weight ratio, making them ideal for
aerospace and automotive applications ✔✔.
What is meant by the term “fatigue” in materials science?
Fatigue refers to the weakening of a material caused by repeatedly applied loads, which can lead to
failure over time ✔✔.
What is the principle behind the Rockwell hardness test?
The Rockwell hardness test measures the depth of penetration of an indenter under a large load
compared to the penetration made by a preload ✔✔.
What does the term “thermal conductivity” refer to?
Thermal conductivity refers to a material's ability to conduct heat ✔✔.
What is the importance of corrosion resistance in materials?