Construction introduction to
hand tools latest update
2024
Drywall
A large, flat board made of layers of fiberboard and gypsum used
primarily for wall construction and finishing. Also known as sheet
rock and wallboard. made in 4x8 panels
Drywall hammers
lighter than normal hammers 12-14oz more round as well
Previous
Play
Next
Rewind 10 seconds
Move forward 10 seconds
Unmute
0:01
/
0:15
Full screen
Brainpower
Read More
Lath
a narrow thin strip of wood used as backing for plaster or to make
latticework
ball peen hammer
, has a much harder head then other hammers, ball end is used for
shaping, in all it helps flatten, bend and shape metal (4oz to 2
pounds)
Peening
The process of bending, shaping, or cutting metal by striking it with
a tool.
Welding
Fusing two pieces of material using a heat process; most commonly
used with metal and plastics
joint
the intersection of workpiece components where a physical
connection is made
Sledge hammer
a large, heavy hammer used for such jobs as breaking rocks and
driving in fence posts .used for demolition work (2 to 20lb)
Bevel
. Any inclination of two surfaces less than 90 degrees.
wood chisel
A woodworking tool for cutting, shaping, or smoothing wood.
cold chisel
Cutting metal
cape chisel
a chisel used to cut key ways, single grooves and square corners
tempered
Treated with heat to create or restore hardness in steel.
center punch
Used to mark where a drilled hole is to be placed; this keeps the
drill bit in position and prevents the drill from jumping to another
part of the material
prick punch
hand tools latest update
2024
Drywall
A large, flat board made of layers of fiberboard and gypsum used
primarily for wall construction and finishing. Also known as sheet
rock and wallboard. made in 4x8 panels
Drywall hammers
lighter than normal hammers 12-14oz more round as well
Previous
Play
Next
Rewind 10 seconds
Move forward 10 seconds
Unmute
0:01
/
0:15
Full screen
Brainpower
Read More
Lath
a narrow thin strip of wood used as backing for plaster or to make
latticework
ball peen hammer
, has a much harder head then other hammers, ball end is used for
shaping, in all it helps flatten, bend and shape metal (4oz to 2
pounds)
Peening
The process of bending, shaping, or cutting metal by striking it with
a tool.
Welding
Fusing two pieces of material using a heat process; most commonly
used with metal and plastics
joint
the intersection of workpiece components where a physical
connection is made
Sledge hammer
a large, heavy hammer used for such jobs as breaking rocks and
driving in fence posts .used for demolition work (2 to 20lb)
Bevel
. Any inclination of two surfaces less than 90 degrees.
wood chisel
A woodworking tool for cutting, shaping, or smoothing wood.
cold chisel
Cutting metal
cape chisel
a chisel used to cut key ways, single grooves and square corners
tempered
Treated with heat to create or restore hardness in steel.
center punch
Used to mark where a drilled hole is to be placed; this keeps the
drill bit in position and prevents the drill from jumping to another
part of the material
prick punch
