Globus 201 Final Exam Questions and Essays
with 100% Correct Answers
INDEPENDENCE MIS: The spacer should always be implanted as far posterior as possible so that
the positive stop on the Triple Barrel Anchor Guide contacts the vertebrae.
Select the correct response:
True
False - ✔️✔️False
INDEPENDENCE MIS: How can you ensure an anchor is correctly loaded into the Triple Barrel
Anchor Guide?
Select the correct response:
Lay instrument flat on the table
Use the laser marked anchor indicator as a guide to the anchor orientation
Use your thumb to secure the anchor in instrument
Confirm that a click was felt or heard
Confirm that anchors are fully seated
All of the above - ✔️✔️All of the above
INDEPENDENCE MIS: Each anchor is to be incrementally impacted one at a time, using
fluoroscopy to monitor the advancement of each anchor.
Select the correct response:
True
False - ✔️✔️True
INDEPENDENCE MIS: The Triple Barrel Anchor Guide will not disengage from the spacer. What
can you advice the surgeon to do?
Select the correct response:
,Confirm the Hex Driver is fully seated into the Threaded Rod hex hole
Rotate Hex Driver counterclockwise while simultaneously withdrawing the instrument, gently
rocking left/right as needed.
All of the above - ✔️✔️All of the above
INDEPENDENCE MIS: If an Anchor needs to be removed from the spacer once implanted, what
should you advise the surgeon before the removal?
Select the correct response:
Confirm that the set screw has been rotated to the open position
Confirm that the Freehand Inserter is attached to the spacer
Confirm that the Anchor Removal Tool is fully threaded into the Anchor
Both 1 and 3 - ✔️✔️Both 1 and 3
Which of the following sets do you need to do a MAGNIFY-S case?
Select the correct response:
9126.9101- MAGNIFY™-S Instrument Set
9126.9102- MAGNIFY™-S 25x31 Implant Set
9126.9103- MAGNIFY™-S 26x34 Implant Set
9126.9104- MAGNIFY™-S 29x39 Implant Set
925.905- ALIF Instrument Set
925.906- ALIF Trials
925.907- ALIF Bone Screws
925.901- Anterior Disc Prep I
925.902- Anterior Disc Prep II
All of the above - ✔️✔️All of the above
MAGNIFY-S: Select the inserter(s) that allow placement of screw(s) with inserter attached to
implant?
,Select the correct response(s):
Lateral Inserter
Offset Inserter
Midline Inserter - ✔️✔️Lateral inserter, offset inserter
MAGNIFY-S: When contracting the implant DO NOT use excess torque as implant integrity can
be compromised.
Select the correct response:
True
False - ✔️✔️True
MAGNIFY-S: How many revolutions of Torque Limiting Hex Driver will result in 1mm expansion?
Select the correct response:
1
2
0.5
1.5 - ✔️✔️1.5
MAGNIFY-S: Can you pack into bone screw holes?
Select the correct response:
No
Yes - ✔️✔️No
MAGNIFY-S: The midline inserter does not attach to implant if set screws are in ________
________.
Select the correct response:
Locked position
, Unlocked positon - ✔️✔️Locked
Which of the following is MONUMENT approved for?
Select the correct response:
MONUMENT is approved as a vertebral body replacement device
MONUMENT is approved for the thoracic spine
MONUMENT is approved as a stand-alone interbody fusion device
MONUMENT is approved as an interbody fusion device with supplemental fixation (i.e. pedicle
screws, facet fixation) from L2-S1 - ✔️✔️MONUMENT is approved as an interbody fusion device
with supplemental fixation (i.e. pedicle screws, facet fixation) from L2-S1
Which of the following is MONUMENT approved for?
Select the correct response:
Grade 1 spondylolisthesis
Grade 2 spondylolisthesis
Grade 3 spondylolisthesis
Grade 4 spondylolisthesis
Grade 5 spondylolisthesis - ✔️✔️Grade 1
How many millimeters of translation can MONUMENT achieve?
Select the correct response:
10mm
8mm
6mm
4mm - ✔️✔️8mm
MONUMENT®: One complete revolution of the Implant Reduction Driver is?
Select the correct response:
with 100% Correct Answers
INDEPENDENCE MIS: The spacer should always be implanted as far posterior as possible so that
the positive stop on the Triple Barrel Anchor Guide contacts the vertebrae.
Select the correct response:
True
False - ✔️✔️False
INDEPENDENCE MIS: How can you ensure an anchor is correctly loaded into the Triple Barrel
Anchor Guide?
Select the correct response:
Lay instrument flat on the table
Use the laser marked anchor indicator as a guide to the anchor orientation
Use your thumb to secure the anchor in instrument
Confirm that a click was felt or heard
Confirm that anchors are fully seated
All of the above - ✔️✔️All of the above
INDEPENDENCE MIS: Each anchor is to be incrementally impacted one at a time, using
fluoroscopy to monitor the advancement of each anchor.
Select the correct response:
True
False - ✔️✔️True
INDEPENDENCE MIS: The Triple Barrel Anchor Guide will not disengage from the spacer. What
can you advice the surgeon to do?
Select the correct response:
,Confirm the Hex Driver is fully seated into the Threaded Rod hex hole
Rotate Hex Driver counterclockwise while simultaneously withdrawing the instrument, gently
rocking left/right as needed.
All of the above - ✔️✔️All of the above
INDEPENDENCE MIS: If an Anchor needs to be removed from the spacer once implanted, what
should you advise the surgeon before the removal?
Select the correct response:
Confirm that the set screw has been rotated to the open position
Confirm that the Freehand Inserter is attached to the spacer
Confirm that the Anchor Removal Tool is fully threaded into the Anchor
Both 1 and 3 - ✔️✔️Both 1 and 3
Which of the following sets do you need to do a MAGNIFY-S case?
Select the correct response:
9126.9101- MAGNIFY™-S Instrument Set
9126.9102- MAGNIFY™-S 25x31 Implant Set
9126.9103- MAGNIFY™-S 26x34 Implant Set
9126.9104- MAGNIFY™-S 29x39 Implant Set
925.905- ALIF Instrument Set
925.906- ALIF Trials
925.907- ALIF Bone Screws
925.901- Anterior Disc Prep I
925.902- Anterior Disc Prep II
All of the above - ✔️✔️All of the above
MAGNIFY-S: Select the inserter(s) that allow placement of screw(s) with inserter attached to
implant?
,Select the correct response(s):
Lateral Inserter
Offset Inserter
Midline Inserter - ✔️✔️Lateral inserter, offset inserter
MAGNIFY-S: When contracting the implant DO NOT use excess torque as implant integrity can
be compromised.
Select the correct response:
True
False - ✔️✔️True
MAGNIFY-S: How many revolutions of Torque Limiting Hex Driver will result in 1mm expansion?
Select the correct response:
1
2
0.5
1.5 - ✔️✔️1.5
MAGNIFY-S: Can you pack into bone screw holes?
Select the correct response:
No
Yes - ✔️✔️No
MAGNIFY-S: The midline inserter does not attach to implant if set screws are in ________
________.
Select the correct response:
Locked position
, Unlocked positon - ✔️✔️Locked
Which of the following is MONUMENT approved for?
Select the correct response:
MONUMENT is approved as a vertebral body replacement device
MONUMENT is approved for the thoracic spine
MONUMENT is approved as a stand-alone interbody fusion device
MONUMENT is approved as an interbody fusion device with supplemental fixation (i.e. pedicle
screws, facet fixation) from L2-S1 - ✔️✔️MONUMENT is approved as an interbody fusion device
with supplemental fixation (i.e. pedicle screws, facet fixation) from L2-S1
Which of the following is MONUMENT approved for?
Select the correct response:
Grade 1 spondylolisthesis
Grade 2 spondylolisthesis
Grade 3 spondylolisthesis
Grade 4 spondylolisthesis
Grade 5 spondylolisthesis - ✔️✔️Grade 1
How many millimeters of translation can MONUMENT achieve?
Select the correct response:
10mm
8mm
6mm
4mm - ✔️✔️8mm
MONUMENT®: One complete revolution of the Implant Reduction Driver is?
Select the correct response: