ARTHROPLASTY IOT TRAINING
UPDATED QUESTIONS WITH
ANSWERS 2024
The suture cup is available in Posterior Offset option, how many (mm) is the offset? -
CORRECT ANSWER>>>>2 mm
Can you get a 135 and 155 option in one universal stem body ? - CORRECT
ANSWER>>>>Yes, you can do both with our cups and stems when using Univers
II
True or False, All of the Univers Revers Glenosphere sizes are available in concentric,
3.5 inferior, +4 offset - CORRECT ANSWER>>>>True
When using a 36 mm SutureCup and insert, what glenosphere is approved?
A) 42+4
B) 36 Standard
C) 39 +2.5 inferior
D) 36 +4
B&D
E) All of the above - CORRECT ANSWER>>>>B & D
Which instrument is used to ensure proper morse taper engagement of glenosphere in
Univers Revers Glenoid - CORRECT ANSWER>>>>Glenosphere Forceps
When inserting the central and peripheral screws, you must not exceed how many Nm
of torque? - CORRECT ANSWER>>>>5 Nm of Torque
What material is the Univers Revers Stem made of? - CORRECT ANSWER>>>>Co Cr
How much press fit will surgeon get with Univers Revers Stem compared to the broach?
- CORRECT ANSWER>>>>1.5mm of press fit
True or False: During explanting process, when you take off the trunion on Univers II or
Apex it's necessary to remove both the inferior and superior screws to disengage from
stem - CORRECT ANSWER>>>>False,
What is the insertion site for Subscapularis? - CORRECT ANSWER>>>>Lesser
Tuberosity
, Can you skip the glenoid peripheral ream? - CORRECT ANSWER>>>>No.
After you put in the glenosphere with Univers Revers what tool you use to verify that the
morse taper happened? - CORRECT ANSWER>>>>Glenosphere forceps with a
linear pull
What is the maximum spacer tray + poly combo height in a Univers Revers? -
CORRECT ANSWER>>>>18 mm (15 mm spacer with 3 mm poly)
What is a feature of the Univers II and Apex TSA Stems? - CORRECT
ANSWER>>>>125-140 inclination variability
What is the most common complication with RTSA resulting in re-operation -
CORRECT ANSWER>>>>Scapular Notching
What is the most common form of arthritis? - CORRECT ANSWER>>>>Osteoarthritis
What is the average humeral retroversion that's reproduced during shoulder
arthroplasty? - CORRECT ANSWER>>>>30 degrees
Which does not qualify for an RTSA?
Small, repairable cuff tear
Rotator cuff arthropathy
Dysfunctional subscap
Proximal humerus fracture - CORRECT ANSWER>>>>
What group of surgery is most common with capsuloraphy aropathy? - CORRECT
ANSWER>>>>RCR
What nerve innervates the deltoid? - CORRECT ANSWER>>>>Axillary nerve
What's the 3 hallmarks of Osteoarthritis in an X-ray? - CORRECT
ANSWER>>>>Osteophytes, Subchondral cysts, Joint space narrowing
What is the neck shaft angle range for Univers II and Apex Cups? - CORRECT
ANSWER>>>>135 and 155
Which of the Walch classifications is posterior erosion of the glenoid cavity that causes
definitive paleo-glenoid and neo-glenoid - CORRECT ANSWER>>>>B1
What size revision stems are available for Univers Revers? - CORRECT
ANSWER>>>>6, 9, and 12
UPDATED QUESTIONS WITH
ANSWERS 2024
The suture cup is available in Posterior Offset option, how many (mm) is the offset? -
CORRECT ANSWER>>>>2 mm
Can you get a 135 and 155 option in one universal stem body ? - CORRECT
ANSWER>>>>Yes, you can do both with our cups and stems when using Univers
II
True or False, All of the Univers Revers Glenosphere sizes are available in concentric,
3.5 inferior, +4 offset - CORRECT ANSWER>>>>True
When using a 36 mm SutureCup and insert, what glenosphere is approved?
A) 42+4
B) 36 Standard
C) 39 +2.5 inferior
D) 36 +4
B&D
E) All of the above - CORRECT ANSWER>>>>B & D
Which instrument is used to ensure proper morse taper engagement of glenosphere in
Univers Revers Glenoid - CORRECT ANSWER>>>>Glenosphere Forceps
When inserting the central and peripheral screws, you must not exceed how many Nm
of torque? - CORRECT ANSWER>>>>5 Nm of Torque
What material is the Univers Revers Stem made of? - CORRECT ANSWER>>>>Co Cr
How much press fit will surgeon get with Univers Revers Stem compared to the broach?
- CORRECT ANSWER>>>>1.5mm of press fit
True or False: During explanting process, when you take off the trunion on Univers II or
Apex it's necessary to remove both the inferior and superior screws to disengage from
stem - CORRECT ANSWER>>>>False,
What is the insertion site for Subscapularis? - CORRECT ANSWER>>>>Lesser
Tuberosity
, Can you skip the glenoid peripheral ream? - CORRECT ANSWER>>>>No.
After you put in the glenosphere with Univers Revers what tool you use to verify that the
morse taper happened? - CORRECT ANSWER>>>>Glenosphere forceps with a
linear pull
What is the maximum spacer tray + poly combo height in a Univers Revers? -
CORRECT ANSWER>>>>18 mm (15 mm spacer with 3 mm poly)
What is a feature of the Univers II and Apex TSA Stems? - CORRECT
ANSWER>>>>125-140 inclination variability
What is the most common complication with RTSA resulting in re-operation -
CORRECT ANSWER>>>>Scapular Notching
What is the most common form of arthritis? - CORRECT ANSWER>>>>Osteoarthritis
What is the average humeral retroversion that's reproduced during shoulder
arthroplasty? - CORRECT ANSWER>>>>30 degrees
Which does not qualify for an RTSA?
Small, repairable cuff tear
Rotator cuff arthropathy
Dysfunctional subscap
Proximal humerus fracture - CORRECT ANSWER>>>>
What group of surgery is most common with capsuloraphy aropathy? - CORRECT
ANSWER>>>>RCR
What nerve innervates the deltoid? - CORRECT ANSWER>>>>Axillary nerve
What's the 3 hallmarks of Osteoarthritis in an X-ray? - CORRECT
ANSWER>>>>Osteophytes, Subchondral cysts, Joint space narrowing
What is the neck shaft angle range for Univers II and Apex Cups? - CORRECT
ANSWER>>>>135 and 155
Which of the Walch classifications is posterior erosion of the glenoid cavity that causes
definitive paleo-glenoid and neo-glenoid - CORRECT ANSWER>>>>B1
What size revision stems are available for Univers Revers? - CORRECT
ANSWER>>>>6, 9, and 12
