• Wrong document? Swap it for free
  • Written by students who passed
  • Immediately available after payment
  • Read online or as PDF
Sell
Where do you study
Your language
Document preview thumbnail
Preview 3 out of 21 pages
Exam (elaborations)

Juniper Networking Fundamentals

Document preview thumbnail
Preview 3 out of 21 pages

802.3 - answer-802.3 is a networking standard established by the Institute of Electrical and Electronics Engineers (IEEE). Among other things, 802.3 standardized the operation of CSMA/CD. While Ethernet and 802.3 differ slightly in their terminology and their frame format, their media access control (MAC) protocols are virtually identical. Today, the term Ethernet refers generically to both the sets of Ethernet standards. 802.11 Group of Standards - answer-The 802.11 Group of Standards are specifications for wireless local area networking. The original standard was released in 1997 and many extensions have been added over the years. Ack - answer-Ack is an abbreviation for Acknowledgement. It is the affirmative response of one device to another in the connection establishment process. Active Scanning - answer-In a wireless environment, active scanning is when a client probes for a particular network in order to associate with it. Address Resolution - answer-Address resolution is the process of using Layer 3 addresses to determine Layer 2 addresses. Address Resolution Protocol (ARP) - answer-In TCP/IP-based networks, the Address Resolution Protocol is the protocol that manages the address resolution process. Analog Lines - answer-Analog lines are the wires or cables used to carry analog signals, such as those in your home telephone service. Analog lines are typically copper wire and operate at Layer 1 or the Physical Layer. An analog signal is a continuous series of electrical pulses that vary over time, like waves. Application Layer/Layer 7 (OSI REFERENCE MODEL) - answer-In the OSI Reference Model, the Application Layer is Layer 7. It specifies network-related functions for a user application or program to ensure that communication with another application or program over a network is possible. It's important to note that this is not the user interface itself. When a user chooses to read email, transfer a file, or surf the network, the user's software program, such as a Web browser, interacts with the Application Layer. In the Five-Layer Model and the TCP/IP Model, the Application Layer has a broader scope of functionality. In those models, it also includes the functionality of the OSI Reference Model's Presentation Layer (Layer 6) and Session Layer (Layer 5). Application Layer (FIVE-LAYER REFERENCE MODEL AND TCP/IP REFERENCE MODEL) - answer-The Application Layer specifies network-related functions for a user application or program so that communication with another program over a network is possible. It's important to note that this is not the user interface itself. When a user chooses to read email, transfer a file, or surf the network, the user's software program, such as a Web browser, interacts with the Application Layer. In the Five-Layer Model and the TCP/IP Model, the Application Layer also manages encoding, data compression, encryption, and sessions. In the OSI Reference Model, those functions are delegated to the Presentation Layer and Session Layer. Asynchronous Transfer Mode (ATM) - answer-Asynchronous transfer mode (ATM) is a Layer 2 WAN protocol that can transport voice, video, and data on the same network with guaranteed performance or quality of service for each type of traffic. Customers can build a Virtual Private Network using ATM. ATM Adaption Layer (AAL) - answer-The ATM Adaption Layer (AAL) is responsible for segmenting the packet into fixed-length cells of 48 bytes each. The receiving device reassembles the cells into the original packet. Autonomous WLAN Architecture - answer-Autonomous architecture, also known as "Fat Access Point" or "Fat AP" architecture, is a form of wireless LAN architecture where all functionality is coded into every access point (wireless termination point). Available Bit Rate (ABR) - answer-Available Bit Rate (ABR) is the ATM service category that is used by applications, such as critical data transfers, that can dynamically adjust their data transmission rate in response to network feedback. The goal of the ABR service is to allow application access to unused network bandwidth. Backward Explicit Congestion Notification (BECN) - answer-Backward Explicit Congestion Notification (BECN) bits are bits in the Frame Relay header used to notify an end station, such as a router, of network congestion. When congestion occurs, Frame Relay switches set the BECN bit to a one in frames going back toward the source of traffic indicating that the sending router should slow down transmission until the congestion subsides. Base-10 System - answer-The base-10 system is a number system using ten digits—0 through 9—that can be grouped together to form a decimal number. Each position within a decimal number represents a power of 10. Base-2 System - answer-Base-2 system is the binary number system that uses only two digits—0 and 1. In the binary number system, each position represents a power of 2. Binary - answer-Binary is a base-2 numbering scheme that uses only two digits—0 and 1—to represent numbers. Each position represents a power of two. Routers and other computers work only with binary numbers. Bit - answer-Bit is the binary digit used in the binary numbering system. A bit is the most basic information unit that computers use. A single bit is a "one" or a "zero", a "true" or a "false", or an "on" or an "off". Bridge - answer-A bridge is a Layer 2 network device that connects two or more physical cable segments to create one larger network. Each side of the bridge becomes a separate collision domain or network segment. So, a bridge can be used to break up a large network into separate collision domains. A bridge builds a MAC address table that it uses to manage traffic flow. When a bridge receives data from an unknown MAC address, it adds that address to its MAC address table and notes the port associated with that address. Then, if a bridge later receives data for that address, it will know on which port it should forward the data. If a bridge receives data for an unknown destination address, it will forward the data on all ports, which is known as flooding. Bridges operate based on reading Layer 2 frame information only. They cannot change Layer 2 addresses, and they do not have any access to Layer 3 data. Broadcast Address - answer-The broadcast MAC address is a special address used to send data to all devices on the same network. The broadcast MAC address is . Other types of MAC addresses include unicast addresses and multicast addresses. Broadcast Domain - answer-A broadcast domain is the group of devices that can be reached by sending a frame addressed to the broadcast MAC address. Bursty - answer-Bursty refers to data that transfers or transmits in short, uneven spurts. LAN traffic is typically bursty. Byte - answer-A byte is a group of 8 bits. It is also known as an octet. Central Office (CO) - answer-Central Office (CO) is the term used to refer to the service provider's nearest exchange. A CO is like a distribution center, sending data to other COs along the path to its final destination. Cell Loss Priority (CLP) - answer-Cell Loss Priority (CLP) is an ATM cell bit indicating which cells should be discarded first, in the case of network congestion. Cell Loss Ratio (CLR) - answer-Cell Loss Ratio (CLR) is the ATM QoS parameter for the percentage of cells that are lost in the network because of error or congestion and that are not received by the destination. Cell Transfer Delay (CTD) - answer-Cell Transfer Delay (CTD) is the ATM QoS parameter for the delay experienced by a cell between the time it takes for the source to transmit the first bit of the cell and the destination to receive the last bit of the cell. Centralized (Switched) WLAN Architecture - answer-Centralized architecture, also known as a switched WLAN system, is a form of wireless LAN architecture where a central switch or access point controller manages multiple access points that are "Thin" or "Lightweight", meaning that they do not themselves contain full LAN functionality. Channel Service Unit/Data Service Unit (CSU/DSU) - answer-A Channel Service Unit/Data Service Unit (CSU/DSU) is a device that prepares data traffic for digital lines. The DSU converts the digital frames used in the service provider's network into a frame format that the router can understand and vice versa. The CSU provides termination for the digital signal and ensures connection integrity through error correction and line monitoring. Checksum/CRC - answer-A checksum, also known as a Cyclic Redundancy Check or CRC, is a simple mathematical calculation performed on each frame to ensure it hasn't been corrupted in transit. CIDR Block - answer-A CIDR block is a representation of the addresses in a range indicated by the prefix length in an address specified in CIDR or "slash" notation. Classful Routing - answer-Classful Routing or Classful IP Addressing was a scheme that divided the IP address space into different-sized chunks or classes of addresses based on how many octets were used for the network portion and how many were used for the host number. With classful IP addressing, the network number always fell on an octet boundary. For example, a Class A network used the first octet for the network number and the last three octets for host numbers and a Class B network number used the first two octets for the network number and the last two octets for host numbers. Classless Inter-Domain Routing (CIDR) - answer-Classless Inter-Domain Routing (CIDR) notation is also known as "slash" notation. It uses a slash after an IP address to indicate the length of the network prefix in terms of bits. The number after the slash is also known as the prefix length. Coaxial Cabling - answer-Coaxial cabling consists of a central conductive core contained within an insulating layer, a metallic shielding layer, and a plastic coating. Consumers may be familiar with coaxial cabling used today with cable television, satellite television, and cable modems. Collision Domain - answer-A collision domain is a group of network devices that compete with each other for access to one physical wire or cable. A collision domain is also known as a network segment. Committed Information Rate (CIR) - answer-The Committed Information Rate (CIR) is the transmission rate for a virtual circuit guaranteed by the service provider in Frame Relay network. Connectionless Protocols - answer-Connectionless Protocols do not require a formal connection before two devices can communicate. Ethernet is an example of a connectionless Layer 2 protocol. Connection-Oriented Protocols - answer-Connection-Oriented Protocols require that two devices establish a formal connection that ensures they are ready to communicate. Connection-oriented Layer 2 protocols include PPP, ATM, and Frame Relay. Constant Bit Rate (CBR) - answer-Constant Bit Rate (CBR) is the ATM service category that is used for the highest priority traffic. CSMA/CA - answer-CSMA/CA stands for Carrier Sense Multiple Access / Collision Avoidance. CSMA/CA is an access method used by wireless networks to avoid collisions. This method relies on each wireless client receiving positive acknowledgements from the access point to confirm that data was received. If no acknowledgment is received, the client will resend the data. Only a single client can transmit at any one time. CSMA/CA differs from CSMA/CD, which relies on detecting collisions when they occur. CSMA/CD is not possible in an wireless environment; a wireless client cannot detect collisions while it is transmitting.

Content preview

Juniper Networking Fundamentals
802.3 - answer-802.3 is a networking standard established by the Institute of Electrical and Electronics
Engineers (IEEE). Among other things, 802.3 standardized the operation of CSMA/CD. While Ethernet
and 802.3 differ slightly in their terminology and their frame format, their media access control (MAC)
protocols are virtually identical. Today, the term Ethernet refers generically to both the sets of Ethernet
standards.

802.11 Group of Standards - answer-The 802.11 Group of Standards are specifications for wireless local
area networking. The original standard was released in 1997 and many extensions have been added
over the years.

Ack - answer-Ack is an abbreviation for Acknowledgement. It is the affirmative response of one device to
another in the connection establishment process.

Active Scanning - answer-In a wireless environment, active scanning is when a client probes for a
particular network in order to associate with it.

Address Resolution - answer-Address resolution is the process of using Layer 3 addresses to determine
Layer 2 addresses.

Address Resolution Protocol (ARP) - answer-In TCP/IP-based networks, the Address Resolution Protocol
is the protocol that manages the address resolution process.

Analog Lines - answer-Analog lines are the wires or cables used to carry analog signals, such as those in
your home telephone service. Analog lines are typically copper wire and operate at Layer 1 or the
Physical Layer. An analog signal is a continuous series of electrical pulses that vary over time, like waves.

Application Layer/Layer 7 (OSI REFERENCE MODEL) - answer-In the OSI Reference Model, the
Application Layer is Layer 7. It specifies network-related functions for a user application or program to
ensure that communication with another application or program over a network is possible. It's
important to note that this is not the user interface itself. When a user chooses to read email, transfer a
file, or surf the network, the user's software program, such as a Web browser, interacts with the
Application Layer. In the Five-Layer Model and the TCP/IP Model, the Application Layer has a broader
scope of functionality. In those models, it also includes the functionality of the OSI Reference Model's
Presentation Layer (Layer 6) and Session Layer (Layer 5).

Application Layer (FIVE-LAYER REFERENCE MODEL AND TCP/IP REFERENCE MODEL) - answer-The
Application Layer specifies network-related functions for a user application or program so that
communication with another program over a network is possible. It's important to note that this is not
the user interface itself. When a user chooses to read email, transfer a file, or surf the network, the
user's software program, such as a Web browser, interacts with the Application Layer. In the Five-Layer
Model and the TCP/IP Model, the Application Layer also manages encoding, data compression,
encryption, and sessions. In the OSI Reference Model, those functions are delegated to the Presentation
Layer and Session Layer.

,Asynchronous Transfer Mode (ATM) - answer-Asynchronous transfer mode (ATM) is a Layer 2 WAN
protocol that can transport voice, video, and data on the same network with guaranteed performance
or quality of service for each type of traffic. Customers can build a Virtual Private Network using ATM.

ATM Adaption Layer (AAL) - answer-The ATM Adaption Layer (AAL) is responsible for segmenting the
packet into fixed-length cells of 48 bytes each. The receiving device reassembles the cells into the
original packet.

Autonomous WLAN Architecture - answer-Autonomous architecture, also known as "Fat Access Point"
or "Fat AP" architecture, is a form of wireless LAN architecture where all functionality is coded into
every access point (wireless termination point).

Available Bit Rate (ABR) - answer-Available Bit Rate (ABR) is the ATM service category that is used by
applications, such as critical data transfers, that can dynamically adjust their data transmission rate in
response to network feedback. The goal of the ABR service is to allow application access to unused
network bandwidth.

Backward Explicit Congestion Notification (BECN) - answer-Backward Explicit Congestion Notification
(BECN) bits are bits in the Frame Relay header used to notify an end station, such as a router, of network
congestion. When congestion occurs, Frame Relay switches set the BECN bit to a one in frames going
back toward the source of traffic indicating that the sending router should slow down transmission until
the congestion subsides.

Base-10 System - answer-The base-10 system is a number system using ten digits—0 through 9—that
can be grouped together to form a decimal number. Each position within a decimal number represents a
power of 10.

Base-2 System - answer-Base-2 system is the binary number system that uses only two digits—0 and 1.
In the binary number system, each position represents a power of 2.

Binary - answer-Binary is a base-2 numbering scheme that uses only two digits—0 and 1—to represent
numbers. Each position represents a power of two. Routers and other computers work only with binary
numbers.

Bit - answer-Bit is the binary digit used in the binary numbering system. A bit is the most basic
information unit that computers use. A single bit is a "one" or a "zero", a "true" or a "false", or an "on"
or an "off".

Bridge - answer-A bridge is a Layer 2 network device that connects two or more physical cable segments
to create one larger network. Each side of the bridge becomes a separate collision domain or network
segment. So, a bridge can be used to break up a large network into separate collision domains. A bridge
builds a MAC address table that it uses to manage traffic flow. When a bridge receives data from an
unknown MAC address, it adds that address to its MAC address table and notes the port associated with
that address. Then, if a bridge later receives data for that address, it will know on which port it should
forward the data. If a bridge receives data for an unknown destination address, it will forward the data
on all ports, which is known as flooding. Bridges operate based on reading Layer 2 frame information
only. They cannot change Layer 2 addresses, and they do not have any access to Layer 3 data.

, Broadcast Address - answer-The broadcast MAC address is a special address used to send data to all
devices on the same network. The broadcast MAC address is ffff.ffff.ffff. Other types of MAC addresses
include unicast addresses and multicast addresses.

Broadcast Domain - answer-A broadcast domain is the group of devices that can be reached by sending
a frame addressed to the broadcast MAC address.

Bursty - answer-Bursty refers to data that transfers or transmits in short, uneven spurts. LAN traffic is
typically bursty.

Byte - answer-A byte is a group of 8 bits. It is also known as an octet.

Central Office (CO) - answer-Central Office (CO) is the term used to refer to the service provider's
nearest exchange. A CO is like a distribution center, sending data to other COs along the path to its final
destination.

Cell Loss Priority (CLP) - answer-Cell Loss Priority (CLP) is an ATM cell bit indicating which cells should be
discarded first, in the case of network congestion.

Cell Loss Ratio (CLR) - answer-Cell Loss Ratio (CLR) is the ATM QoS parameter for the percentage of cells
that are lost in the network because of error or congestion and that are not received by the destination.

Cell Transfer Delay (CTD) - answer-Cell Transfer Delay (CTD) is the ATM QoS parameter for the delay
experienced by a cell between the time it takes for the source to transmit the first bit of the cell and the
destination to receive the last bit of the cell.

Centralized (Switched) WLAN Architecture - answer-Centralized architecture, also known as a switched
WLAN system, is a form of wireless LAN architecture where a central switch or access point controller
manages multiple access points that are "Thin" or "Lightweight", meaning that they do not themselves
contain full LAN functionality.

Channel Service Unit/Data Service Unit (CSU/DSU) - answer-A Channel Service Unit/Data Service Unit
(CSU/DSU) is a device that prepares data traffic for digital lines. The DSU converts the digital frames
used in the service provider's network into a frame format that the router can understand and vice
versa. The CSU provides termination for the digital signal and ensures connection integrity through error
correction and line monitoring.

Checksum/CRC - answer-A checksum, also known as a Cyclic Redundancy Check or CRC, is a simple
mathematical calculation performed on each frame to ensure it hasn't been corrupted in transit.

CIDR Block - answer-A CIDR block is a representation of the addresses in a range indicated by the prefix
length in an address specified in CIDR or "slash" notation.

Classful Routing - answer-Classful Routing or Classful IP Addressing was a scheme that divided the IP
address space into different-sized chunks or classes of addresses based on how many octets were used
for the network portion and how many were used for the host number. With classful IP addressing, the
network number always fell on an octet boundary. For example, a Class A network used the first octet

Document information

Uploaded on
September 30, 2024
Number of pages
21
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers
$9.99

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
TOPDOCTOR
5.0
(1)
Sold
10
Followers
5
Items
3387
Last sold
1 year ago



Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions