Splash Book Petsmart- Questions and Answers
Step 1 For Pouch Installation Correct Ans-Remove protective cap
Step 2 For Pouch Installation Correct Ans-Hook the Pouch hole onto hanger
Step 3 For Pouch Installation Correct Ans-Push pouch cap at the bottom of pouch onto port
Step 4 For Pouch Installation Correct Ans-Snap to lock and be sure pouch is pushed all the
way down
Step 1 For Pouch Removal Correct Ans-Hold the neck of the pouch, depress the lever, and
lift pouch to remove
Step 2 For Pouch Removal Correct Ans-Unhook the pouch hole from hanger
Step 3 For Pouch Removal Correct Ans-Use the protective caps whenever ports are not
used
Step 1 For Blockage Procedure Correct Ans-Remove the supplied "syringe" from the hole
on the left side of the unit
Step 2 For Blockage Procedure Correct Ans-Fill the syringe with warm water
, Splash Book Petsmart- Questions and Answers
Step 3 For Blockage Procedure Correct Ans-Turn on water
Step 4 For Blockage Procedure Correct Ans-Move the "select product" dial to the port to
be cleared and Move the "select function" switch to "Bathe" position
Step 5 For Blockage Procedure Correct Ans-Turn "adjust product flow rate" dial to "+"
position
Step 6 For Blockage Procedure Correct Ans-Insert syringe connection cap onto blocked
port, hold in place and compress syringe until empty.
#10 Blade Correct Ans-used for clippers
Hydrosurge Correct Ans-Used to bathe pet
Step 1 For Hydrosurge Correct Ans-Turn on water and adjust temperature to desired
setting
Step 2 For Hydrosurge Correct Ans-Select desired "product" using the "select product"
dial. The number on the dial should match the desired product
, Splash Book Petsmart- Questions and Answers
Step 3 For Hydrosurge Correct Ans-Using the "select function" switch, choose the "rinse"
or "bathe" position
Step 4 For Hydrosurge Correct Ans-Adjust Product Flow Rate for more or less product
Step 5 For Hydrosurge Correct Ans-Angle the nozzle at 45 degree angle and hold 3-4 inches
away from coat. Slowly move the spray pattern across the animal
Step 6 For Hydrosurge Correct Ans-Select "rinse" to rinse animal (always leave on rinse
position)
Greyhound Comb Correct Ans-thinner coats = teeth closer together
thick coats = teeth farter apart
(ineffective on short smooth coats)
Slicker Brushes Correct Ans-most commonly used, detangling and undercoat removal,
small (soft) = short- medium coat, large (hard) = thick - dense coat
(can cause brush burn from over brushing, or from applying too much pressure, never use a
hard slicker brush on dogs with thin, short coats
FURminator Brush Correct Ans-only use in deshedding package (do not use on drop coats,
curly coats or hairless dogs, you can overuse nd remove too much coat or damage the skin
undercoat, creating a thin spot on the dog)
Step 1 For Pouch Installation Correct Ans-Remove protective cap
Step 2 For Pouch Installation Correct Ans-Hook the Pouch hole onto hanger
Step 3 For Pouch Installation Correct Ans-Push pouch cap at the bottom of pouch onto port
Step 4 For Pouch Installation Correct Ans-Snap to lock and be sure pouch is pushed all the
way down
Step 1 For Pouch Removal Correct Ans-Hold the neck of the pouch, depress the lever, and
lift pouch to remove
Step 2 For Pouch Removal Correct Ans-Unhook the pouch hole from hanger
Step 3 For Pouch Removal Correct Ans-Use the protective caps whenever ports are not
used
Step 1 For Blockage Procedure Correct Ans-Remove the supplied "syringe" from the hole
on the left side of the unit
Step 2 For Blockage Procedure Correct Ans-Fill the syringe with warm water
, Splash Book Petsmart- Questions and Answers
Step 3 For Blockage Procedure Correct Ans-Turn on water
Step 4 For Blockage Procedure Correct Ans-Move the "select product" dial to the port to
be cleared and Move the "select function" switch to "Bathe" position
Step 5 For Blockage Procedure Correct Ans-Turn "adjust product flow rate" dial to "+"
position
Step 6 For Blockage Procedure Correct Ans-Insert syringe connection cap onto blocked
port, hold in place and compress syringe until empty.
#10 Blade Correct Ans-used for clippers
Hydrosurge Correct Ans-Used to bathe pet
Step 1 For Hydrosurge Correct Ans-Turn on water and adjust temperature to desired
setting
Step 2 For Hydrosurge Correct Ans-Select desired "product" using the "select product"
dial. The number on the dial should match the desired product
, Splash Book Petsmart- Questions and Answers
Step 3 For Hydrosurge Correct Ans-Using the "select function" switch, choose the "rinse"
or "bathe" position
Step 4 For Hydrosurge Correct Ans-Adjust Product Flow Rate for more or less product
Step 5 For Hydrosurge Correct Ans-Angle the nozzle at 45 degree angle and hold 3-4 inches
away from coat. Slowly move the spray pattern across the animal
Step 6 For Hydrosurge Correct Ans-Select "rinse" to rinse animal (always leave on rinse
position)
Greyhound Comb Correct Ans-thinner coats = teeth closer together
thick coats = teeth farter apart
(ineffective on short smooth coats)
Slicker Brushes Correct Ans-most commonly used, detangling and undercoat removal,
small (soft) = short- medium coat, large (hard) = thick - dense coat
(can cause brush burn from over brushing, or from applying too much pressure, never use a
hard slicker brush on dogs with thin, short coats
FURminator Brush Correct Ans-only use in deshedding package (do not use on drop coats,
curly coats or hairless dogs, you can overuse nd remove too much coat or damage the skin
undercoat, creating a thin spot on the dog)
