3CX Basic Certification Practice
Questions and Answers Rated A+
Question: Are supported IP phones still covered when these have not been provisioned
via 3CX, run custom templates and/or use outdated firmware versions? - ANSWER-
Answer: No
Question: Can 3CX be installed, activated and operated without internet access? -
ANSWER-Answer: No
Question: Can you provision and use remote extensions when using a "Standard
Edition" license key? - ANSWER-Answer: No
Question: Does the firewall checker check if ports have been altered by a firewall /
router when data traverses it? - ANSWER-Answer: Yes
Question: If the host running 3CX is also used as a DNS server, is it recommended to
relocate 3CX to another host dedicated for 3CX? - ANSWER-Answer: Yes
Question: Is iOS 13 the minimum version required to install the 3CX App on an iPhone?
Answer: - ANSWER-No (It's actually iOS 12)
Question: True or False: A 3CX App can use the same 3CX extension number as a
desktop IP phone. - ANSWER-Answer: True
Question: True or False: Configuring a remote extension in STUN mode requires you to
only port forward/NAT the SIP Port (Default 5060 UDP/TCP) on your Firewall -
ANSWER-Answer: False
Question: True or False: Configuring inbound rules for DIDs allows you to define
different routing destinations, based on the time of day - ANSWER-Answer: True
Question: True or False: Each IP phone can be provisioned to have a different Ring
Tone - ANSWER-Answer: True
Question: True or False: Every Digital Receptionist can be configured with a different
language prompt set, allowing a multi language Digital Receptionist structure. -
ANSWER-Answer: True
Question: True or False: In order to be able to run the 3CX Web Configuration Wizard
remotely, you must have HTTP port TCP:5015 port forwarded on the Firewall. -
ANSWER-Answer: True
Questions and Answers Rated A+
Question: Are supported IP phones still covered when these have not been provisioned
via 3CX, run custom templates and/or use outdated firmware versions? - ANSWER-
Answer: No
Question: Can 3CX be installed, activated and operated without internet access? -
ANSWER-Answer: No
Question: Can you provision and use remote extensions when using a "Standard
Edition" license key? - ANSWER-Answer: No
Question: Does the firewall checker check if ports have been altered by a firewall /
router when data traverses it? - ANSWER-Answer: Yes
Question: If the host running 3CX is also used as a DNS server, is it recommended to
relocate 3CX to another host dedicated for 3CX? - ANSWER-Answer: Yes
Question: Is iOS 13 the minimum version required to install the 3CX App on an iPhone?
Answer: - ANSWER-No (It's actually iOS 12)
Question: True or False: A 3CX App can use the same 3CX extension number as a
desktop IP phone. - ANSWER-Answer: True
Question: True or False: Configuring a remote extension in STUN mode requires you to
only port forward/NAT the SIP Port (Default 5060 UDP/TCP) on your Firewall -
ANSWER-Answer: False
Question: True or False: Configuring inbound rules for DIDs allows you to define
different routing destinations, based on the time of day - ANSWER-Answer: True
Question: True or False: Each IP phone can be provisioned to have a different Ring
Tone - ANSWER-Answer: True
Question: True or False: Every Digital Receptionist can be configured with a different
language prompt set, allowing a multi language Digital Receptionist structure. -
ANSWER-Answer: True
Question: True or False: In order to be able to run the 3CX Web Configuration Wizard
remotely, you must have HTTP port TCP:5015 port forwarded on the Firewall. -
ANSWER-Answer: True