Splash Book Petsmart – Complete Study Guide (100%)
Hydrosurge Right Ans - Used to bathe pet
Step 1 For Hydrosurge Right Ans - Turn on water and adjust temperature
to desired setting
Step 2 For Hydrosurge Right Ans - Select desired "product" using the
"select product" dial. The number on the dial should match the desired
product
Step 3 For Hydrosurge Right Ans - Using the "select function" switch,
choose the "rinse" or "bathe" position
Step 4 For Hydrosurge Right Ans - Adjust Product Flow Rate for more or
less product
Step 5 For Hydrosurge Right Ans - Angle the nozzle at 45 degree angle and
hold 3-4 inches away from coat. Slowly move the spray pattern across the
animal
Step 6 For Hydrosurge Right Ans - Select "rinse" to rinse animal (always
leave on rinse position)
Step 1 For Pouch Installation Right Ans - Remove protective cap
Step 2 For Pouch Installation Right Ans - Hook the Pouch hole onto hanger
Step 3 For Pouch Installation Right Ans - Push pouch cap at the bottom of
pouch onto port
Step 4 For Pouch Installation Right Ans - Snap to lock and be sure pouch is
pushed all the way down
Step 1 For Pouch Removal Right Ans - Hold the neck of the pouch, depress
the lever, and lift pouch to remove
Step 2 For Pouch Removal Right Ans - Unhook the pouch hole from hanger
, Step 3 For Pouch Removal Right Ans - Use the protective caps whenever
ports are not used
Step 1 For Blockage Procedure Right Ans - Remove the supplied "syringe"
from the hole on the left side of the unit
Step 2 For Blockage Procedure Right Ans - Fill the syringe with warm
water
Step 3 For Blockage Procedure Right Ans - Turn on water
Step 4 For Blockage Procedure Right Ans - Move the "select product" dial to
the port to be cleared and Move the "select function" switch to "Bathe"
position
Step 5 For Blockage Procedure Right Ans - Turn "adjust product flow rate"
dial to "+" position
Step 6 For Blockage Procedure Right Ans - Insert syringe connection cap
onto blocked port, hold in place and compress syringe until empty.
#10 Blade Right Ans - used for clippers
Greyhound Comb Right Ans - thinner coats = teeth closer together
thick coats = teeth farter apart
(ineffective on short smooth coats)
Slicker Brushes Right Ans - most commonly used, detangling and
undercoat removal, small (soft) = short- medium coat, large (hard) = thick -
dense coat
(can cause brush burn from over brushing, or from applying too much
pressure, never use a hard slicker brush on dogs with thin, short coats
FURminator Brush Right Ans - only use in deshedding package (do not use
on drop coats, curly coats or hairless dogs, you can overuse nd remove too
much coat or damage the skin undercoat, creating a thin spot on the dog)
Hydrosurge Right Ans - Used to bathe pet
Step 1 For Hydrosurge Right Ans - Turn on water and adjust temperature
to desired setting
Step 2 For Hydrosurge Right Ans - Select desired "product" using the
"select product" dial. The number on the dial should match the desired
product
Step 3 For Hydrosurge Right Ans - Using the "select function" switch,
choose the "rinse" or "bathe" position
Step 4 For Hydrosurge Right Ans - Adjust Product Flow Rate for more or
less product
Step 5 For Hydrosurge Right Ans - Angle the nozzle at 45 degree angle and
hold 3-4 inches away from coat. Slowly move the spray pattern across the
animal
Step 6 For Hydrosurge Right Ans - Select "rinse" to rinse animal (always
leave on rinse position)
Step 1 For Pouch Installation Right Ans - Remove protective cap
Step 2 For Pouch Installation Right Ans - Hook the Pouch hole onto hanger
Step 3 For Pouch Installation Right Ans - Push pouch cap at the bottom of
pouch onto port
Step 4 For Pouch Installation Right Ans - Snap to lock and be sure pouch is
pushed all the way down
Step 1 For Pouch Removal Right Ans - Hold the neck of the pouch, depress
the lever, and lift pouch to remove
Step 2 For Pouch Removal Right Ans - Unhook the pouch hole from hanger
, Step 3 For Pouch Removal Right Ans - Use the protective caps whenever
ports are not used
Step 1 For Blockage Procedure Right Ans - Remove the supplied "syringe"
from the hole on the left side of the unit
Step 2 For Blockage Procedure Right Ans - Fill the syringe with warm
water
Step 3 For Blockage Procedure Right Ans - Turn on water
Step 4 For Blockage Procedure Right Ans - Move the "select product" dial to
the port to be cleared and Move the "select function" switch to "Bathe"
position
Step 5 For Blockage Procedure Right Ans - Turn "adjust product flow rate"
dial to "+" position
Step 6 For Blockage Procedure Right Ans - Insert syringe connection cap
onto blocked port, hold in place and compress syringe until empty.
#10 Blade Right Ans - used for clippers
Greyhound Comb Right Ans - thinner coats = teeth closer together
thick coats = teeth farter apart
(ineffective on short smooth coats)
Slicker Brushes Right Ans - most commonly used, detangling and
undercoat removal, small (soft) = short- medium coat, large (hard) = thick -
dense coat
(can cause brush burn from over brushing, or from applying too much
pressure, never use a hard slicker brush on dogs with thin, short coats
FURminator Brush Right Ans - only use in deshedding package (do not use
on drop coats, curly coats or hairless dogs, you can overuse nd remove too
much coat or damage the skin undercoat, creating a thin spot on the dog)
