CM 2215 OSHA 510 Study Guide Questions & Answers 100% Correct
Protect safety and health of America's workers - ANSWEROSHA's mission is to
11(c) - ANSWERThe right of the worker to seek safety and health on the job site without fear of
punishment can be found in Section___ of the OSH Act
lower morale and increased training costs - ANSWERResults of workplace injuries and illnesses may
include
specific industry - ANSWERHorizontal standards apply when a condition is not covered by a ___ ___
standard
consistent - ANSWERThe purpose of OSHA directives, including Enforcement and Compliance Directives
(CPL), is to ensure ___ OSHA regulations
cited violation - ANSWEROSHA requires that employers certify that abatement is complete for each ___
its workers - ANSWERCreating employer failed to inform employees, other than ___, of damaged
guardrail would result in a "creating" employer receiving a citation under OSHA's multi-employer citation
policy for damaging a guardrail exposing all employees to a fall hazard.
opening, walk through/around, closing - ANSWERIn addition to the presentation of credentials, the
inspection process includes the ___ conference, the ___ inspection, and the ___ conference.
partial - ANSWERAs a result of a work-related illness or injury, days the employee was only able to work a
___ shift would be classified as restricted work activity (not including the day the illness or injury began).
100 - ANSWERIn OSHA Record keeping, an incidence rate is the number of recordable injuries or illness
per ___ full-time workers.
, following - ANSWERManagers should be an example by knowing and ___ the rules employees are
expected to follow to demonstrate management leadership and commitment to safety and health
competent - ANSWERThe two main components of an employer's accident and prevention
responsibilities required by 1926.20(b) a safety and health program and jobsite inspections by a ___
person.
100 - ANSWERThe maximum travel distance from any point of the protected area to the nearest fire
extinguisher shall not exceed ___ feet
visible - ANSWERAccident prevention signs such as; danger, caution, and exit signs shall be ___ when
work is being performed.
3.5 - ANSWERWhen stopping a fall, a personal fall arrest system, shall bring an employee to a complete
stop and limit the maximum deceleration distance to ___ feet.
maintained - ANSWERAll hand and power tools, whether paid for by the employer or employee, shall be
___ in a safe condition.
qualified - ANSWERA person who has a recognized degree, certificate, or professional standing or who
has demonstrated his/her ability to solve problems relating to specific work is a ___ person.
sheilded - ANSWERWhenever practicable, all arc welding and cutting operations shall be ___ to protect
employees and other persons working in the vicinity
fire - ANSWERFailure to inspect for oil or grease on regulator fittings, valves, or the cap threads on a
cylinder of oxygen can result in ___ or explosion.
6 - ANSWERPersonal fall arrest systems, when stopping a fall, shall be rigged such that an employee
cannot free fall more than ___ feet or contact any lower level.
10 - ANSWERWhen mechanical equipment is being used perpendicular to the roof edge, the warning
lines cannot be closer than ___ feet.
Protect safety and health of America's workers - ANSWEROSHA's mission is to
11(c) - ANSWERThe right of the worker to seek safety and health on the job site without fear of
punishment can be found in Section___ of the OSH Act
lower morale and increased training costs - ANSWERResults of workplace injuries and illnesses may
include
specific industry - ANSWERHorizontal standards apply when a condition is not covered by a ___ ___
standard
consistent - ANSWERThe purpose of OSHA directives, including Enforcement and Compliance Directives
(CPL), is to ensure ___ OSHA regulations
cited violation - ANSWEROSHA requires that employers certify that abatement is complete for each ___
its workers - ANSWERCreating employer failed to inform employees, other than ___, of damaged
guardrail would result in a "creating" employer receiving a citation under OSHA's multi-employer citation
policy for damaging a guardrail exposing all employees to a fall hazard.
opening, walk through/around, closing - ANSWERIn addition to the presentation of credentials, the
inspection process includes the ___ conference, the ___ inspection, and the ___ conference.
partial - ANSWERAs a result of a work-related illness or injury, days the employee was only able to work a
___ shift would be classified as restricted work activity (not including the day the illness or injury began).
100 - ANSWERIn OSHA Record keeping, an incidence rate is the number of recordable injuries or illness
per ___ full-time workers.
, following - ANSWERManagers should be an example by knowing and ___ the rules employees are
expected to follow to demonstrate management leadership and commitment to safety and health
competent - ANSWERThe two main components of an employer's accident and prevention
responsibilities required by 1926.20(b) a safety and health program and jobsite inspections by a ___
person.
100 - ANSWERThe maximum travel distance from any point of the protected area to the nearest fire
extinguisher shall not exceed ___ feet
visible - ANSWERAccident prevention signs such as; danger, caution, and exit signs shall be ___ when
work is being performed.
3.5 - ANSWERWhen stopping a fall, a personal fall arrest system, shall bring an employee to a complete
stop and limit the maximum deceleration distance to ___ feet.
maintained - ANSWERAll hand and power tools, whether paid for by the employer or employee, shall be
___ in a safe condition.
qualified - ANSWERA person who has a recognized degree, certificate, or professional standing or who
has demonstrated his/her ability to solve problems relating to specific work is a ___ person.
sheilded - ANSWERWhenever practicable, all arc welding and cutting operations shall be ___ to protect
employees and other persons working in the vicinity
fire - ANSWERFailure to inspect for oil or grease on regulator fittings, valves, or the cap threads on a
cylinder of oxygen can result in ___ or explosion.
6 - ANSWERPersonal fall arrest systems, when stopping a fall, shall be rigged such that an employee
cannot free fall more than ___ feet or contact any lower level.
10 - ANSWERWhen mechanical equipment is being used perpendicular to the roof edge, the warning
lines cannot be closer than ___ feet.
