Georgia CDL Test Questions With All
Verified Complete Solutions.
The brake pedal is part of which braking system? - Answer service
To prevent your tires and engine from overheating while you are driving in especially hot weather, you
should: - Answer Decrease your speed.
If a vehicle gets stuck on a railroad track, the driver should: - Answer Get out of the vehicle and walk
away from the tracks.
Sometimes, when checking the automatic transmission fluid level: - Answer Your vehicle may have to
be left running.
The most common type of foundation brake used is the: - Answer S-cam drum brake.
What is reaction distance? - Answer The distance traveled between seeing a hazard and physically
hitting the brakes
During a basic vehicle control skills test, you may be asked to: - Answer alley dock
What is the average driver's reaction time? - Answer Between three-quarters of a second and one
second
Off-ramps: - Answer can be dangerous for trucks
An example of mandatory emergency equipment is: - Answer A supply of spare electrical fuses.
, To confirm that a trailer has ABS, you can: - Answer Look under the trailer for wheel speed sensors
coming from the back of the brakes.
If you have more than one license, you will be fined: - Answer Up to $5,000.
During a pre-trip inspection, belts in the engine compartment should be: - Answer checked for
tightness
Front wheel braking works: - Answer under all conditions
A low air pressure warning signal should activate: - Answer When tank pressure falls below 55 psi.
What happens to a driver who is convicted of two serous traffic violations within a three-year period? -
Answer They will lose their CDL for at least 60 days.
When inspecting engine compartment belts during the vehicle inspection test: - Answer The applicant
must identify which items are not belt-driven, if any.
To inspect slack adjusters on S-cam brakes, you need to: - Answer Chock the wheels and disengage the
parking brake.
Rims with welding repairs: - Answer are unsafe
When operating a vehicle with a dual brake system, a driver should: - Answer Wait to begin driving
until the air compressor builds up a minimum pressure of 100 psi in both the primary and secondary
systems.
Dollies equipped with ABS are required to have malfunction lamps located where? - Answer On the left
side
A one-way check valve: - Answer Prevents air from escaping if the air compressor has a leak.
Verified Complete Solutions.
The brake pedal is part of which braking system? - Answer service
To prevent your tires and engine from overheating while you are driving in especially hot weather, you
should: - Answer Decrease your speed.
If a vehicle gets stuck on a railroad track, the driver should: - Answer Get out of the vehicle and walk
away from the tracks.
Sometimes, when checking the automatic transmission fluid level: - Answer Your vehicle may have to
be left running.
The most common type of foundation brake used is the: - Answer S-cam drum brake.
What is reaction distance? - Answer The distance traveled between seeing a hazard and physically
hitting the brakes
During a basic vehicle control skills test, you may be asked to: - Answer alley dock
What is the average driver's reaction time? - Answer Between three-quarters of a second and one
second
Off-ramps: - Answer can be dangerous for trucks
An example of mandatory emergency equipment is: - Answer A supply of spare electrical fuses.
, To confirm that a trailer has ABS, you can: - Answer Look under the trailer for wheel speed sensors
coming from the back of the brakes.
If you have more than one license, you will be fined: - Answer Up to $5,000.
During a pre-trip inspection, belts in the engine compartment should be: - Answer checked for
tightness
Front wheel braking works: - Answer under all conditions
A low air pressure warning signal should activate: - Answer When tank pressure falls below 55 psi.
What happens to a driver who is convicted of two serous traffic violations within a three-year period? -
Answer They will lose their CDL for at least 60 days.
When inspecting engine compartment belts during the vehicle inspection test: - Answer The applicant
must identify which items are not belt-driven, if any.
To inspect slack adjusters on S-cam brakes, you need to: - Answer Chock the wheels and disengage the
parking brake.
Rims with welding repairs: - Answer are unsafe
When operating a vehicle with a dual brake system, a driver should: - Answer Wait to begin driving
until the air compressor builds up a minimum pressure of 100 psi in both the primary and secondary
systems.
Dollies equipped with ABS are required to have malfunction lamps located where? - Answer On the left
side
A one-way check valve: - Answer Prevents air from escaping if the air compressor has a leak.
