CCNP ENCOR 350-401
Which statement about route targets is true when using VRF-Lite?
A. Route targets control the import and export of routes into a customer routing table.
B. When BGP is configured, route targets are transmitted as BGP standard
communities.
C. Route targets allow customers to be assigned overlapping addresses.
D. Route targets uniquely identify the customer routing table - ✔️✔️A
Which OSPF network types are compatible and allow communication through the two
peering devices?
A. point-to-multipoint to nonbroadcast
B. broadcast to nonbroadcast
C. point-to-multipoint to broadcast
D. broadcast to point-to-point - ✔️✔️B
Which privilege level is assigned to VTY users?
A. 1
B. 7
C. 13
D. 15 - ✔️✔️A
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content.
B. The RIB maintains a minor image of the FIB.
C. The RIB is used to make IP source prefix-based switching decisions.
D. The FIB is where all IP routing information is stored - ✔️✔️A
Which requirement for an Ansiblemanaged node is true?
A. It must have an SSH server running.
B. It must be a Linux server or a Cisco device.
C. It must support ad hoc commands.
D. It must have an Ansible Tower installed - ✔️✔️B
A client device fails to see the enterprise SSID, but other client devices are connected
to it. What is the cause of this issue?
A. The client has incorrect credentials stored for the configured broadcast SSID.
,B. The hidden SSID was not manually configured on the client. C. The broadcast SSID
was not manually configured on the client.
D. The client has incorrect credentials stored for the configured hidden SSID - ✔️✔️B
Which two descriptions of FlexConnect mode for Cisco APs are true? (Choose two.)
A. APs that operate in FlexConnect mode cannot detect rogue APs.
B. When connected to the controller, FlexConnect APs can tunnel traffic back to the
controller.
C. FlexConnect mode is used when the APs are set up in a mesh environment and
used to bridge between each other.
C. FlexConnect mode is a feature that is designed to allow specified CAPWAP-enabled
APs to exclude themselves from managing data traffic between dents and
infrastructure.
D. FlexConnect mode is a wireless solution for branch office and remote office
deployments - ✔️✔️BD
Which function does a fabric edge node perform in an SD-Access deployment?
A. Connects endpoints to the fabric and forwards their traffic.
B. Encapsulates end-user data traffic into LISP.
C. Connects the SD-Access fabric to another fabric or external Layer 3 networks.
D. Provides reachability between border nodes in the fabric underlay. - ✔️✔️A
Which NGFW mode blocks flows crossing the firewall?
A. tap
B. inline
C. passive
D. inline tap - ✔️✔️B
How does Cisco TrustSec enable more flexible access controls for dynamic networking
environments and data centers?
A. uses flexible NetFlow
B. assigns a VLAN to the endpoint
C. classifies traffic based on advanced application recognition D. classifies traffic based
on the contextual identity of the endpoint rather than its IP address - ✔️✔️D
Which LISP infrastructure device provides connectivity between non-LISP sites and
LISP sites by receiving non-LISP traffic with a LISP site destination?
A. PITR
B. map resolver
C. map server
D. PETR - ✔️✔️A
, Which two protocols are used with YANG data models? (Choose two.)
A. TLS
B. RESTCONF
C. SSH
D. NETCONF
E. HTTPS - ✔️✔️BD
Which HTTP status code is the correct response for a request with an incorrect
password applied to a REST API session?
A. HTTP Status Code: 200
B. HTTP Status Code: 302
C. HTTP Status Code: 401
D. HTTP Status Code: 504 - ✔️✔️C
The login method is configured on the VTY lines of a router with these parameters. •
The first method for authentication is TACACS • If TACACS is unavailable, login is
allowed without any provided credentials Which configuration accomplishes this task? -
✔️✔️D
Which statement about multicast RPs is true?
A. RPs are required only when using protocol independent multicast dense mode.
B. RPs are required for protocol independent multicast sparse mode and dense mode.
C. By default, the RP is needed periodically to maintain sessions with sources and
receivers.
D. By default, the RP is needed only to start new sessions with sources and receivers. -
✔️✔️D
To increase total throughput and redundancy on the links between the wireless
controller and switch, the customer enabled LAG on the wireless controller. Which
EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. Passive
C. On
D. Auto - ✔️✔️C
Which feature does Cisco TrustSec use to provide scalable, secure communication
throughout a network?
A. security group tag ACL assigned to each port on a switch
B. security group tag number assigned to each user on a switch C. security group tag
number assigned to each port on a network
D. security group tag ACL assigned to each router on a network - ✔️✔️C
Which statement about route targets is true when using VRF-Lite?
A. Route targets control the import and export of routes into a customer routing table.
B. When BGP is configured, route targets are transmitted as BGP standard
communities.
C. Route targets allow customers to be assigned overlapping addresses.
D. Route targets uniquely identify the customer routing table - ✔️✔️A
Which OSPF network types are compatible and allow communication through the two
peering devices?
A. point-to-multipoint to nonbroadcast
B. broadcast to nonbroadcast
C. point-to-multipoint to broadcast
D. broadcast to point-to-point - ✔️✔️B
Which privilege level is assigned to VTY users?
A. 1
B. 7
C. 13
D. 15 - ✔️✔️A
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content.
B. The RIB maintains a minor image of the FIB.
C. The RIB is used to make IP source prefix-based switching decisions.
D. The FIB is where all IP routing information is stored - ✔️✔️A
Which requirement for an Ansiblemanaged node is true?
A. It must have an SSH server running.
B. It must be a Linux server or a Cisco device.
C. It must support ad hoc commands.
D. It must have an Ansible Tower installed - ✔️✔️B
A client device fails to see the enterprise SSID, but other client devices are connected
to it. What is the cause of this issue?
A. The client has incorrect credentials stored for the configured broadcast SSID.
,B. The hidden SSID was not manually configured on the client. C. The broadcast SSID
was not manually configured on the client.
D. The client has incorrect credentials stored for the configured hidden SSID - ✔️✔️B
Which two descriptions of FlexConnect mode for Cisco APs are true? (Choose two.)
A. APs that operate in FlexConnect mode cannot detect rogue APs.
B. When connected to the controller, FlexConnect APs can tunnel traffic back to the
controller.
C. FlexConnect mode is used when the APs are set up in a mesh environment and
used to bridge between each other.
C. FlexConnect mode is a feature that is designed to allow specified CAPWAP-enabled
APs to exclude themselves from managing data traffic between dents and
infrastructure.
D. FlexConnect mode is a wireless solution for branch office and remote office
deployments - ✔️✔️BD
Which function does a fabric edge node perform in an SD-Access deployment?
A. Connects endpoints to the fabric and forwards their traffic.
B. Encapsulates end-user data traffic into LISP.
C. Connects the SD-Access fabric to another fabric or external Layer 3 networks.
D. Provides reachability between border nodes in the fabric underlay. - ✔️✔️A
Which NGFW mode blocks flows crossing the firewall?
A. tap
B. inline
C. passive
D. inline tap - ✔️✔️B
How does Cisco TrustSec enable more flexible access controls for dynamic networking
environments and data centers?
A. uses flexible NetFlow
B. assigns a VLAN to the endpoint
C. classifies traffic based on advanced application recognition D. classifies traffic based
on the contextual identity of the endpoint rather than its IP address - ✔️✔️D
Which LISP infrastructure device provides connectivity between non-LISP sites and
LISP sites by receiving non-LISP traffic with a LISP site destination?
A. PITR
B. map resolver
C. map server
D. PETR - ✔️✔️A
, Which two protocols are used with YANG data models? (Choose two.)
A. TLS
B. RESTCONF
C. SSH
D. NETCONF
E. HTTPS - ✔️✔️BD
Which HTTP status code is the correct response for a request with an incorrect
password applied to a REST API session?
A. HTTP Status Code: 200
B. HTTP Status Code: 302
C. HTTP Status Code: 401
D. HTTP Status Code: 504 - ✔️✔️C
The login method is configured on the VTY lines of a router with these parameters. •
The first method for authentication is TACACS • If TACACS is unavailable, login is
allowed without any provided credentials Which configuration accomplishes this task? -
✔️✔️D
Which statement about multicast RPs is true?
A. RPs are required only when using protocol independent multicast dense mode.
B. RPs are required for protocol independent multicast sparse mode and dense mode.
C. By default, the RP is needed periodically to maintain sessions with sources and
receivers.
D. By default, the RP is needed only to start new sessions with sources and receivers. -
✔️✔️D
To increase total throughput and redundancy on the links between the wireless
controller and switch, the customer enabled LAG on the wireless controller. Which
EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. Passive
C. On
D. Auto - ✔️✔️C
Which feature does Cisco TrustSec use to provide scalable, secure communication
throughout a network?
A. security group tag ACL assigned to each port on a switch
B. security group tag number assigned to each user on a switch C. security group tag
number assigned to each port on a network
D. security group tag ACL assigned to each router on a network - ✔️✔️C
