• Wrong document? Swap it for free
  • Written by students who passed
  • Immediately available after payment
  • Read online or as PDF
Sell
Where do you study
Your language
Document preview thumbnail
Preview 1 out of 3 pages
Other

NOCTI study guide (Pre-Engineering/engineering technology)

Document preview thumbnail
Preview 1 out of 3 pages

A civil engineer is ordering guardrail to create a triangular barrier around a hazard at a trucking terminal. The two shortest sides of the triangle meet at a right angle, and are 20 feet, and 10 feet long. To the nearest foot, how long is the third side? - answer-22 feet A company operating on an international scale is called - answer-globalization A failed compressor at an ice cream factory will cost $7,500 at replace and will shut down production for 3 hours at $5,000 per hour. what is the total cost of this shutdown? - answer-$22,500 A farad is a unit of - answer-Capacitance A knitting needle is an example of which type of simple machine? - answer-wedge A shipping crate requires 90 pounds of force to slide across a concrete floor. if the coefficient of friction between the crate and the floor is 0.60, how heavy is the crate? - answer-150 lbs. A specialized schematic used to document industrial control logic system is a - answer-ladder diagram A test instrument that displays a waveform is a/an - answer-Oscilloscope Based on 242 workdays per year that are 8 hours long, how much time could be saved each year if an increase in productivity saved 15 minutes each day? - answer-60.50 hours By using a spreadsheet for reporting data, an engineer can produce - answer-Tables, graphs , charts, and visual formats Calculate the flow out of a pipe per hour if there are 180 gallons per minute. - answer-10,800 gallons/hour Calculate the resulting downtime cost if there are $3,000 in lost production, $500 in spare parts, $250 in re-startup costs, $500 in lost energy costs, and $1,000 in depreciation costs. - answer-$5,250 Gauge pressure at sea level is - answer-0 psi Gear A has 44 teeth and rotates at 100 RPM driving gear B which has 88 teeth. What is the RPM of gear B? - answer-50 RPM In the DC circuit below, If R^5 burns open, the total current - answer-Decreases Surge protectors are installed on electrical equipment to protect equipment from (blank). - answer-sudden power increases The ability of a metal to withstand shock lading is known as its - answer-toughness The binary number 100101 equals - answer-37 The effect of mixing oil and compressed oxygen is (blank) - answer-an explosion or fire The government organization whose purpose is to set and enforce worksite safety and health standards is (blank)? - answer-OSHA The main components of the engineering design process include identifying, defining, selecting, implementing, and (blank) - answer-evaluating The reading on the micrometer shown below is closest to - answer-0.308 inch The relationship of force, pressure, and piston area in an air cylinder is represented by - answer-force= pressure x area The symbol used in electrical schematics to represent a batter is - answer-II To validate a new design idea before proceeding with additional expenses in development, (blank) should be performed First - answer-an evaluation Using ohm's law, how much current is going through the following circuit? 15.5 volts 5 Ohms resistance - answer-3.1 amps what can a protractor measure? - answer-Angles what is the equation for the basic unit of electrical power (the watt)? - answer-P=I^2 R What is the Fahrenheit equivalent of 35 degrees Celsius? - answer-95 Degrees Fahrenheit What organization defines standards related to joining metals using the TLG (Tungsten inert Gas) Process? - answer-AWS when a micrometer reads 2.468 inches for a hole that is to be bored to 2.473 inches, the hole is considered - answer-0.005 inch undersize When specifying and identifying threads, what does the underlined number in 1/2-13UNC-2A represent? - answer-class of fit when storing gas cylinders, it is important that they be in stored in (blank). - answer-well-ventilated areas Which of the lines below represents a center line? - answer-C which of these is a ferrous metal? - answer-mild steel

Content preview

NOCTI study guide
(Pre-Engineering/engineering
technology)
A civil engineer is ordering guardrail to create a triangular barrier around a
hazard at a trucking terminal. The two shortest sides of the triangle meet at
a right angle, and are 20 feet, and 10 feet long. To the nearest foot, how
long is the third side? - answer-22 feet

A company operating on an international scale is called - answer-
globalization

A failed compressor at an ice cream factory will cost $7,500 at replace and
will shut down production for 3 hours at $5,000 per hour. what is the total
cost of this shutdown? - answer-$22,500

A farad is a unit of - answer-Capacitance

A knitting needle is an example of which type of simple machine? - answer-
wedge

A shipping crate requires 90 pounds of force to slide across a concrete floor.
if the coefficient of friction between the crate and the floor is 0.60, how
heavy is the crate? - answer-150 lbs.

A specialized schematic used to document industrial control logic system is a
- answer-ladder diagram

A test instrument that displays a waveform is a/an - answer-Oscilloscope

Based on 242 workdays per year that are 8 hours long, how much time could
be saved each year if an increase in productivity saved 15 minutes each
day? - answer-60.50 hours

By using a spreadsheet for reporting data, an engineer can produce -
answer-Tables, graphs , charts, and visual formats

Calculate the flow out of a pipe per hour if there are 180 gallons per minute.
- answer-10,800 gallons/hour

Calculate the resulting downtime cost if there are $3,000 in lost production,
$500 in spare parts, $250 in re-startup costs, $500 in lost energy costs, and
$1,000 in depreciation costs. - answer-$5,250

Document information

Uploaded on
September 16, 2024
Number of pages
3
Written in
2024/2025
Type
Other
Person
Unknown
$8.99

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
TOPDOCTOR
5.0
(1)
Sold
10
Followers
5
Items
3387
Last sold
1 year ago




Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions