AMT-2 Exam Questions with correct
Answers
Safety is of the first importance in the discharge of duty. These rules provide for a safe
and efficient operation. In case of doubt, the safe course must always be followed. -
Answer -1.101
All employees working in electrified territory must attend training and successfully pass
the AMT-2 Electrical operating rules and instructions examination. - Answer -1.102
Employees who bave passed the required AMT-2 examination as Class A, B, of C.
Class A and B employees must pass the AMT-2 examination annually. Class C
employees must pass the AMT-2 examination every two years. Employees who fail this
examination or allow their qualifications to lapse, will not perform duties in Electrified
Territory. Employees qualifying in any month will carry qualifications to the last month of
the following calendar year. - Answer -1.103
Do not work on or about an electric circuit, apparatus, or equipment unless qualified and
authorized. - Answer -1.108
Personnel are prohibited from getting on top of any high equipment while under the
energized catenary system. - Answer -1.111
Personnel must not enter substations, converter stations, or electrical enclosures unless
qualified and authorized. - Answer -1.112
The Power Director must be advised of all personnel entering any substation or ET
enclosure. - Answer -1.113
Conductive material such as steel tape measure, wire, wet or non-rated rope, or linen
tape-line containing metallic reinforcement must not be used around energized wire
apparatus, equipment, or third rail. - Answer -1.114
When any rule cannot be complied with, all work must STOP. The Deputy Chief
Engineer - ET or his designated representative, must be informed of the circumstances
before proceeding with work. - Answer -1.115
Answers
Safety is of the first importance in the discharge of duty. These rules provide for a safe
and efficient operation. In case of doubt, the safe course must always be followed. -
Answer -1.101
All employees working in electrified territory must attend training and successfully pass
the AMT-2 Electrical operating rules and instructions examination. - Answer -1.102
Employees who bave passed the required AMT-2 examination as Class A, B, of C.
Class A and B employees must pass the AMT-2 examination annually. Class C
employees must pass the AMT-2 examination every two years. Employees who fail this
examination or allow their qualifications to lapse, will not perform duties in Electrified
Territory. Employees qualifying in any month will carry qualifications to the last month of
the following calendar year. - Answer -1.103
Do not work on or about an electric circuit, apparatus, or equipment unless qualified and
authorized. - Answer -1.108
Personnel are prohibited from getting on top of any high equipment while under the
energized catenary system. - Answer -1.111
Personnel must not enter substations, converter stations, or electrical enclosures unless
qualified and authorized. - Answer -1.112
The Power Director must be advised of all personnel entering any substation or ET
enclosure. - Answer -1.113
Conductive material such as steel tape measure, wire, wet or non-rated rope, or linen
tape-line containing metallic reinforcement must not be used around energized wire
apparatus, equipment, or third rail. - Answer -1.114
When any rule cannot be complied with, all work must STOP. The Deputy Chief
Engineer - ET or his designated representative, must be informed of the circumstances
before proceeding with work. - Answer -1.115
