BICSI Technician HW #2 Exam Questions and answers ()

BICSI IN101, V8.0 Day 1 – 2023 Exam Questions and answers (202472025)
AHJ - ✔✔Abbreviation of authority having jurisdiction. The building official, electrical inspector,
fire marshal, or other individuals or entities responsible for interpretation and enforcement of local
building and electrical codes. (ITSIMM, page A-1 to A-2) 02_PROFESSIONALISM AND
PROJECT PLANNING


A drawings - ✔✔Architectural drawings show a plan (top) view of each floor in a building. They
include all aspects of the physical construction of the buiding, which provide the detail for such
items as wall types, elevations, rated construction (fire and smoke), reflected ceiling plans,door
hardware schedule, exact floor penetration dimensions, cabinetry, and furnishings. If the architect
employs interior designers, their work will be reflected on these drawings.(ITSIMM, page 10-5)
02_PROFESSIONALISM AND PROJECT PLANNING


Code - ✔✔A rule or set of rules intended to ensure safety during the installation and use of
materials, components, fixtures, systems, premises, and related subjects. Codes typically are
invoked and enforced through government regulation. (ITSIMM, page 3-52)
02_PROFESSIONALISM AND PROJECT PLANNING


E drawings - ✔✔Electrical drawings are very important to ICT systems cabling installers. They
indicate where the electrical services are installed inside the building and the pathways that may
be installed by the electrical contractor for use by the cabling installation team. The drawings
indicate the grounding system installed by the electrical contractor and the location of supporting
structures installed by the electrical contractor (e.g., floor boxes, cable tray, surface raceway, poke-
thrus, duct banks). (ITSIMM, page 10-5) 02_PROFESSIONALISM AND PROJECT PLANNING


FP drawings - ✔✔Fire protection drawings show the size and route of fire suppression system
piping and associated fire suppression agent heads and nozzles within the structures. (ITSIMM,
page 10-5) 02_PROFESSIONALISM AND PROJECT PLANNING


ICT - ✔✔Abbreviation of Information and Communications Technology. (ITSIMM, page A-1)
02_PROFESSIONALISM AND PROJECT PLANNING


M drawings - ✔✔Mechanical drawings indicate the size and route of the HVAC system ducts, air
handler units, chilled water piping, and refrigerant piping within the structures. (ITSIMM, page
10-5) 02_PROFESSIONALISM AND PROJECT PLANNING

, P drawings - ✔✔Plumbing drawings indicate the size and route of potable water, specialized water,
sanitary sewer, and rainwater roof drain piping within the structures. (ITSIMM, page 10-5)
02_PROFESSIONALISM AND PROJECT PLANNING


Regulation - ✔✔An authoritative rule that controls or governs behavior leading to uniformity.
(ITSIMM, page A-2) 02_PROFESSIONALISM AND PROJECT PLANNING


S drawing - ✔✔Structural drawings show the location of all components of the building structure
itself— the steel beams, concrete floors, exterior walls, and other components that make up the
basic structure. The plans contain detailed sectionalized drawings that give both a plan (top) view
and an elevation (side) view of the structures. (ITSIMM, page 10-5) 02_PROFESSIONALISM
AND PROJECT PLANNING


Standard - ✔✔A collection of specifications that encompass properties of components, systems,
and practices intended to ensure an accepted minimum degree of functionality and longevity
(performance). Standards are intended to reflect accepted norms as typically determined either
through a balloting process conducted by a nationally or internationally accredited organization or
as developed by businesses, industry groups, or governments for their use. (ITSIMM, page 3-54)
02_PROFESSIONALISM AND PROJECT PLANNING


T drawings - ✔✔Telecommunications drawing, referred to as T drawings, indicate
telecommunications work area outlet locations, pathways, distribution room, TR space layouts,
and media required for the project. (ITSIMM, page 10-5) 02_PROFESSIONALISM AND
PROJECT PLANNING


True or False: The clothes an installer wears to a work site are considered a form of
communication. - ✔✔True - The installer must recognize that appearance is a form of
communication that can establish expectations. An organized, neat appearance, free from offensive
or distracting items, is a benefit to installers and their organization. (ITSIMM, page 3-49)
02_PROFESSIONALISM AND PROJECT PLANNING


A _________ is a rule or set of rules intended to ensure safety during the installation and use of
materials, components, fixtures, systems, premises, and related subjects. - ✔✔Code - A code is a
rule or set of rules intended to ensure safety during the installation and use of materials,