and CORRECT Answers
If lead to height ratio is between 1/2 and 3/4 and only 2 or 3 spans the head guy should
be_____ than suspension strand. - Correct Answer- One SIze Larger
Important set of deliverables - Correct Answer- Design documents
OSP cost variance - Correct Answer- 10%
CSI 27
CSI 28
CSI 31
CSI 33
CSI26 - Correct Answer- Telecommunications
electrical safety and security'
Earth work
Utilities
Electrical
NAP groupings - Correct Answer- 4,6,8,12
4 parts security - Correct Answer- Prevent, Detect,Alarm,Secure
3 components of EMI - Correct Answer- Unbalanced electromagnetic fields of the power
system, Coupling between power and telecommunications and susceptibility of the tele
system
Direct buried cables collects ground strikes with a distance determined by soil resistance
typically? - Correct Answer- 6.6' to 19.7'
, A reading of______ ampres is the best possible reading for any bonding conductor, AC
should be less than 1A and DC 500 Miliampres - Correct Answer- 0
Maximum value for 2 point bonding in central offices? - Correct Answer- .1 Ohms
Trencher used in soft loamy soils or loose clay soils depths up to 5' 3' for smaller trenchers -
Correct Answer- Vibratory
Trencher used in tight soils, heavy clays or loose rock Depth sup to 5' - Correct Answer-
Static
Trenchers used in Hardend clay rock soil or adverse conditions - Correct Answer- Rip plow
Maximum connector loss reccomended - Correct Answer- .75 DB
____ have individual jackets for each tight buffered fiber.______ has one jacket and is lower
cost. - Correct Answer- Breakout, Distribution
_______ and ______ are not used after the first 24 binders. - Correct Answer- Violet and slate
Load coil designs to counter the effects of capacitance buildup in loop lengths over? - Correct
Answer- 5.5 KM
Baseband cabling used in lengths up to? - Correct Answer- 328'
Uses a solid polymer that insulates each conducting wire ad is color coded and more resistant
to electrical surges and more tolerant to handle than PE-39 has 6 to 3000 Pairs - Correct
Answer- PE-89
PE-39 has pair range of? - Correct Answer- 25 to 4200 pair
What determines the maximum permissible end to end system attenuation in a given fiber
link? - Correct Answer- Average transmitter power and receiver sensitivity