CWEA PRACTICE TEST
WITH COMPLETE
SOLUTIONS
Which welding process is most commonly used for SMALL pipe maintenance welding
B B B B B B B B B B B
? - correct answer-OxyAcetylene gas welding
B B B B B
What is the proper definition of an engine? - correct answer-
B B B B B B B B B B
It is a machine designed to convert energy into useful mechanical motion
B B B B B B B B B B B
What is wet stacking and how can it be prevented? - correct answer-
B B B B B B B B B B B B
It is unburned fuel collecting in the exhaust due to light or no load conditions
B B B B B B B B B B B B B B
To check flywheel face runout, where should the dial indicator be positioned? -
B B B B B B B B B B B B
correct answer-The base on the bell housing and pointer on the flywheel face
B B B B B B B B B B B B B
If a 38-
B B
tooth gear running at 360 rmp is driving another gear at 144 rmp what is the number of
B B B B B B B B B B B B B B B B B B
teeth on the driven gear? - correct answer-95
B B B B B B B
Which of the following is required for a sealed ball bearing? - correct answer-
B B B B B B B B B B B B B
It does not need to be lubricated under normal use
B B B B B B B B B
A DAFT is an acronym meaning: - correct answer-Dissolved Air Flotation Thickener
B B B B B B B B B B B
What is the governing agency that permits odor control systems? - correct answer-
B B B B B B B B B B B B
AQMD
, At what pressure rating would you use a blower instead of a fan? - correct answer-
B B B B B B B B B B B B B B B
7 psi
B
Which of the following valves is unsuitable for high-pressure flow? - correct answer-
B B B B B B B B B B B B
A needle valve
B B
A sodium hypochlorite tank's full working capacity is 23,000 gallons. Its current level is
B B B B B B B B B B B B B B
at 1,200 gallons. How many gallons does the delivery driver need to add to bring it to 7
B B B B B B B B B B B B B B B B B
0% capacity? - correct answer-14,900 gal.
B B B B B
What is the result if 6/8 " is converted to decimal form? - correct answer-.75
B B B B B B B B B B B B B B
What is the conversion of 100° Celsius into Fahrenheit? - correct answer-212°
B B B B B B B B B B B
If 17.32 v are applied across a resistance of 50 ohms, how much power is extended in
B B B B B B B B B B B B B B B B B
the resistor? - correct answer-6.0 watts
B B B B B
A standard steel plate is 4' wide, 8' long, and 1' thick. If steel weighs 490 lbs/
B B B B B B B B B B B B B B B B
ft^3, what is the total weight of this plate? - correct answer-1,306.6 lbs
B B B B B B B B B B B B
What is the volume in cubic feet of carbon media that is 6' thick in clarifier that has 50' d
B B B B B B B B B B B B B B B B B B B
iameter and is 20' deep? Round answer to the nearest cubic foot. - correct answer-
B B B B B B B B B B B B B B
11,781 ft^3 B
A 150-watt, 120-
B B
volt lamp burns constantly for 8 hours at a rated voltage. What is the energy used in w
B B B B B B B B B B B B B B B B B
atts/hours? - correct answer-1,200 watts/hours B B B B
Which of the following is 12/16 of one inch equal to? - correct answer-3/4 inch
B B B B B B B B B B B B B B
The property if an electrical circuit restricts the flow of current and: - correct answer-
B B B B B B B B B B B B B B
resistance
Which of the following can burn the insulation of the supply connections at the motor st
B B B B B B B B B B B B B B B
arter? - correct answer-The connections are loose or have poor contacts
B B B B B B B B B B
Where do you start troubleshooting when an electrical motor fails to operate after obse
B B B B B B B B B B B B B
rving a mechanical failure? - correct answer-At the power source
B B B B B B B B B
What does NEC stand for? - correct answer-National Electrical Code
B B B B B B B B B
What is a pipe union typically used for? - correct answer-It is used to connect pipes
B B B B B B B B B B B B B B B
Which of the following electrical circuits had more than one path for the current to flow
B B B B B B B B B B B B B B B
? - correct answer-Parallel circuit
B B B B
Overloading of an electrical circuit may be caused by which of the following? -
B B B B B B B B B B B B B
correct answer-Connecting loads that draw too much current
B B B B B B B B
WITH COMPLETE
SOLUTIONS
Which welding process is most commonly used for SMALL pipe maintenance welding
B B B B B B B B B B B
? - correct answer-OxyAcetylene gas welding
B B B B B
What is the proper definition of an engine? - correct answer-
B B B B B B B B B B
It is a machine designed to convert energy into useful mechanical motion
B B B B B B B B B B B
What is wet stacking and how can it be prevented? - correct answer-
B B B B B B B B B B B B
It is unburned fuel collecting in the exhaust due to light or no load conditions
B B B B B B B B B B B B B B
To check flywheel face runout, where should the dial indicator be positioned? -
B B B B B B B B B B B B
correct answer-The base on the bell housing and pointer on the flywheel face
B B B B B B B B B B B B B
If a 38-
B B
tooth gear running at 360 rmp is driving another gear at 144 rmp what is the number of
B B B B B B B B B B B B B B B B B B
teeth on the driven gear? - correct answer-95
B B B B B B B
Which of the following is required for a sealed ball bearing? - correct answer-
B B B B B B B B B B B B B
It does not need to be lubricated under normal use
B B B B B B B B B
A DAFT is an acronym meaning: - correct answer-Dissolved Air Flotation Thickener
B B B B B B B B B B B
What is the governing agency that permits odor control systems? - correct answer-
B B B B B B B B B B B B
AQMD
, At what pressure rating would you use a blower instead of a fan? - correct answer-
B B B B B B B B B B B B B B B
7 psi
B
Which of the following valves is unsuitable for high-pressure flow? - correct answer-
B B B B B B B B B B B B
A needle valve
B B
A sodium hypochlorite tank's full working capacity is 23,000 gallons. Its current level is
B B B B B B B B B B B B B B
at 1,200 gallons. How many gallons does the delivery driver need to add to bring it to 7
B B B B B B B B B B B B B B B B B
0% capacity? - correct answer-14,900 gal.
B B B B B
What is the result if 6/8 " is converted to decimal form? - correct answer-.75
B B B B B B B B B B B B B B
What is the conversion of 100° Celsius into Fahrenheit? - correct answer-212°
B B B B B B B B B B B
If 17.32 v are applied across a resistance of 50 ohms, how much power is extended in
B B B B B B B B B B B B B B B B B
the resistor? - correct answer-6.0 watts
B B B B B
A standard steel plate is 4' wide, 8' long, and 1' thick. If steel weighs 490 lbs/
B B B B B B B B B B B B B B B B
ft^3, what is the total weight of this plate? - correct answer-1,306.6 lbs
B B B B B B B B B B B B
What is the volume in cubic feet of carbon media that is 6' thick in clarifier that has 50' d
B B B B B B B B B B B B B B B B B B B
iameter and is 20' deep? Round answer to the nearest cubic foot. - correct answer-
B B B B B B B B B B B B B B
11,781 ft^3 B
A 150-watt, 120-
B B
volt lamp burns constantly for 8 hours at a rated voltage. What is the energy used in w
B B B B B B B B B B B B B B B B B
atts/hours? - correct answer-1,200 watts/hours B B B B
Which of the following is 12/16 of one inch equal to? - correct answer-3/4 inch
B B B B B B B B B B B B B B
The property if an electrical circuit restricts the flow of current and: - correct answer-
B B B B B B B B B B B B B B
resistance
Which of the following can burn the insulation of the supply connections at the motor st
B B B B B B B B B B B B B B B
arter? - correct answer-The connections are loose or have poor contacts
B B B B B B B B B B
Where do you start troubleshooting when an electrical motor fails to operate after obse
B B B B B B B B B B B B B
rving a mechanical failure? - correct answer-At the power source
B B B B B B B B B
What does NEC stand for? - correct answer-National Electrical Code
B B B B B B B B B
What is a pipe union typically used for? - correct answer-It is used to connect pipes
B B B B B B B B B B B B B B B
Which of the following electrical circuits had more than one path for the current to flow
B B B B B B B B B B B B B B B
? - correct answer-Parallel circuit
B B B B
Overloading of an electrical circuit may be caused by which of the following? -
B B B B B B B B B B B B B
correct answer-Connecting loads that draw too much current
B B B B B B B B