1|Pag e
API 577 EXAM 2|| ACTUAL EXAM 2024-2025 WITH
ALL QUESTIONS AND CORRECT ANSWERS
ALREADY GRADED A+|| LATEST AND
COMPLKETE UPDATE WITH VERIFIED
SOLUTIONS|| ASSURED PASS!!!
Which of the following statements is correct? - ANSWER: API 577
provides guidance to the API authorized inspector on welding
inspection.
The actual throat of a weld is best described as: - ANSWER: The shortest
distance between the weld root and the face of a fillet weld.
The term "arc blow" refers to which of the following? - ANSWER: The
deflection of the arc due to magnetic forces.
An autogenous weld is a weld that is best described by which of the
following? - ANSWER: A weld made without filler metal.
In welding, a discontinuity is defined as: - ANSWER: An interuption of
the typical structure of a material.
The heat affected zone of a weld is best described by which of the
following? - ANSWER: That portion of the base metal whose
mechanical properties or microstructure have been altered by the heat of
welding or thermal cutting
,2|Pag e
Welding inspection includes which of the following? - ANSWER: Visual
and nondestructive examination of the welds, Review of specifications,
welding procedures, and welder qualifications, Review of joint designs
and cleaning procedures.
Which of the following tasks are not normally performed by the
inspector prior to welding? - ANSWER: Check the appearance and size
of welds.
. Who is responsible for the "quality craftsmanship" of weldments? -
ANSWER: The welder.
During welding operations, the inspector should: - ANSWER: Confirm
welding parameters and techniques are supported by the WPS and WPQ,
Complete physical checks, visual examinations, and in process NDE,
Establish a quality control and quality assurance umbrella with the
welding organization.
Following the completion of welding, and before the completed welds
are placed in service, the inspector should: - ANSWER: a. Verify post
weld acceptance and that NDE was performed at the selected locations,
Verify that post weld heat treatments and pressure testing were
performed, if required, and that the results were acceptable, Audit the
inspection files to identify inaccuracies and incomplete information
If at any time during welding inspection the inspector discover defects or
nonconformances, he/she should: - ANSWER: The defects or
, 3|Pag e
nonconformances should be brought to the attention of those responsible
or corrected before the work proceeds further.
If ASME Section V, Article 1 is specified by the referenceing code,
NDE personnel: - ANSWER: Shall be qualified in accordance with
ASNT SNT-TC-1A or ANSI/ASNT CP-189.
API 577 requires that inspectors should be aware of the hazards
associated with welding and take steps to avoid injury while performing
inspection tasks. As a minimum, the inspector should: - ANSWER:
Follow all site safety rules and regulations.
API 577 describes all but which of the following welding processes? -
ANSWER: Electro Slag Welding.
Which of the following weld processes uses a flux coated electrode? -
ANSWER: SMAW.
Which of the following weld processes uses a non consumable
electrode? - ANSWER: GMAW.
Which of the following weld processes uses a flux filled tubular
electrode? - ANSWER: FCAW.
Which of the following is not an advantage of SMAW? - ANSWER: The
deposition rate is higher than for GMAW or SAW.
API 577 EXAM 2|| ACTUAL EXAM 2024-2025 WITH
ALL QUESTIONS AND CORRECT ANSWERS
ALREADY GRADED A+|| LATEST AND
COMPLKETE UPDATE WITH VERIFIED
SOLUTIONS|| ASSURED PASS!!!
Which of the following statements is correct? - ANSWER: API 577
provides guidance to the API authorized inspector on welding
inspection.
The actual throat of a weld is best described as: - ANSWER: The shortest
distance between the weld root and the face of a fillet weld.
The term "arc blow" refers to which of the following? - ANSWER: The
deflection of the arc due to magnetic forces.
An autogenous weld is a weld that is best described by which of the
following? - ANSWER: A weld made without filler metal.
In welding, a discontinuity is defined as: - ANSWER: An interuption of
the typical structure of a material.
The heat affected zone of a weld is best described by which of the
following? - ANSWER: That portion of the base metal whose
mechanical properties or microstructure have been altered by the heat of
welding or thermal cutting
,2|Pag e
Welding inspection includes which of the following? - ANSWER: Visual
and nondestructive examination of the welds, Review of specifications,
welding procedures, and welder qualifications, Review of joint designs
and cleaning procedures.
Which of the following tasks are not normally performed by the
inspector prior to welding? - ANSWER: Check the appearance and size
of welds.
. Who is responsible for the "quality craftsmanship" of weldments? -
ANSWER: The welder.
During welding operations, the inspector should: - ANSWER: Confirm
welding parameters and techniques are supported by the WPS and WPQ,
Complete physical checks, visual examinations, and in process NDE,
Establish a quality control and quality assurance umbrella with the
welding organization.
Following the completion of welding, and before the completed welds
are placed in service, the inspector should: - ANSWER: a. Verify post
weld acceptance and that NDE was performed at the selected locations,
Verify that post weld heat treatments and pressure testing were
performed, if required, and that the results were acceptable, Audit the
inspection files to identify inaccuracies and incomplete information
If at any time during welding inspection the inspector discover defects or
nonconformances, he/she should: - ANSWER: The defects or
, 3|Pag e
nonconformances should be brought to the attention of those responsible
or corrected before the work proceeds further.
If ASME Section V, Article 1 is specified by the referenceing code,
NDE personnel: - ANSWER: Shall be qualified in accordance with
ASNT SNT-TC-1A or ANSI/ASNT CP-189.
API 577 requires that inspectors should be aware of the hazards
associated with welding and take steps to avoid injury while performing
inspection tasks. As a minimum, the inspector should: - ANSWER:
Follow all site safety rules and regulations.
API 577 describes all but which of the following welding processes? -
ANSWER: Electro Slag Welding.
Which of the following weld processes uses a flux coated electrode? -
ANSWER: SMAW.
Which of the following weld processes uses a non consumable
electrode? - ANSWER: GMAW.
Which of the following weld processes uses a flux filled tubular
electrode? - ANSWER: FCAW.
Which of the following is not an advantage of SMAW? - ANSWER: The
deposition rate is higher than for GMAW or SAW.
