AUTOCAD Chapter 16; Questions & Answers
100% Pass
All dimensional values are displayed horizontally and read from the bottom of the sheet in ____
dimensioning. CORRECT ANSWER-unidirectional
The dimensioning system in which angular dimensions are used to locate features from
surfaces, centerlines, or center planes is known as the ____ coordinate system. CORRECT
ANSWER-polar
The model space dimension size is calculated by multiplying the ____ by the desired plotted
dimension size. CORRECT ANSWER-annotation scale (Wrong)
Which text placement setting should you choose in the Text tab of the New Dimension Style
dialog box to align text according to the Japanese standard? CORRECT ANSWER-JIS
The normally accepted size for fraction text on a drawing is ____. CORRECT ANSWER-the
same size as non-fractional text
The Æ symbol placed in front of a diameter dimension is an example of a ____. CORRECT
ANSWER-prefix?
If you set the measurement scale for a drawing at 1.5 and a line measures exactly 2 inches long,
what value will be displayed in the dimension? CORRECT ANSWER-3
, AUTOCAD Chapter 16; Questions & Answers
100% Pass
Some dimensions show the location of a feature without describing its size. CORRECT
ANSWER-False (wrong)
The American Institute of Architects is responsible for the Y14.5-2009 dimensioning standard
used in mechanical drafting. CORRECT ANSWER-True
You can set a dimension style current by entering its name at the command line.
CORRECT ANSWER-True
In architectural drafting, the locations of doors and windows are usually dimensioned to their
centers. CORRECT ANSWER-false (wrong)
General notes are attached to the feature being dimensioned using a leader line.
CORRECT ANSWER-false
In mechanical drafting, if you provide an overall dimension, you can omit one of the smaller
dimensions. CORRECT ANSWER-false (wrong)
The Dimension Style Manager allows you to change the current dimension style.
CORRECT ANSWER-True
Dimensions are created as associative dimensions by default. CORRECT ANSWER-true
100% Pass
All dimensional values are displayed horizontally and read from the bottom of the sheet in ____
dimensioning. CORRECT ANSWER-unidirectional
The dimensioning system in which angular dimensions are used to locate features from
surfaces, centerlines, or center planes is known as the ____ coordinate system. CORRECT
ANSWER-polar
The model space dimension size is calculated by multiplying the ____ by the desired plotted
dimension size. CORRECT ANSWER-annotation scale (Wrong)
Which text placement setting should you choose in the Text tab of the New Dimension Style
dialog box to align text according to the Japanese standard? CORRECT ANSWER-JIS
The normally accepted size for fraction text on a drawing is ____. CORRECT ANSWER-the
same size as non-fractional text
The Æ symbol placed in front of a diameter dimension is an example of a ____. CORRECT
ANSWER-prefix?
If you set the measurement scale for a drawing at 1.5 and a line measures exactly 2 inches long,
what value will be displayed in the dimension? CORRECT ANSWER-3
, AUTOCAD Chapter 16; Questions & Answers
100% Pass
Some dimensions show the location of a feature without describing its size. CORRECT
ANSWER-False (wrong)
The American Institute of Architects is responsible for the Y14.5-2009 dimensioning standard
used in mechanical drafting. CORRECT ANSWER-True
You can set a dimension style current by entering its name at the command line.
CORRECT ANSWER-True
In architectural drafting, the locations of doors and windows are usually dimensioned to their
centers. CORRECT ANSWER-false (wrong)
General notes are attached to the feature being dimensioned using a leader line.
CORRECT ANSWER-false
In mechanical drafting, if you provide an overall dimension, you can omit one of the smaller
dimensions. CORRECT ANSWER-false (wrong)
The Dimension Style Manager allows you to change the current dimension style.
CORRECT ANSWER-True
Dimensions are created as associative dimensions by default. CORRECT ANSWER-true
