CSM - 411 CONSTRUCTION SAFETY OSHA-30 EXAM
CSM - 411 Construction Safety Osha-
30 Exam Questions With Verified
Answers Latest 202341/2025
When Was Osha Written And Signed Into Law? (CORRECT ANSWER) Written In
1970 And Signed Into Law 1971
What Are Osha's Top 3 Inspection Priorities/Reasons (CORRECT ANSWER) 1.
Imminent Danger
2. Fatality Or Catastrophic Loss
3. Complaint Or Referral
What Is A Multilift In Steel Erection Called? And How Many Members Can Be Lifted
How Many Feet Apart? (CORRECT ANSWER) Christmas Tree
5 Members @ 7' Apart
What Are The Height Requirements For Fall Protection Standards For Scaffolds,
Steel Erection, And General Work (CORRECT ANSWER) Scaffolds - 10' Above
Steel Erection - 30'
General Work - 6'
What Should Not Be Used As Counterweights (CORRECT ANSWER) Anything
Flowable Such As Sand, Gravel, Or Water
What Is Not An Acceptable System To Be Used For Trenching Excavation For Shoring
And Cave In Protection (CORRECT ANSWER) Plywood
Min Distance Spoil Pile Should Be Used From Trench (CORRECT ANSWER) 2'
If Employee Brings Own Tools And Ppe, Who Is Responisble That These Still Meet
Regulations (CORRECT ANSWER) Employer
, CSM - 411 CONSTRUCTION SAFETY OSHA-30 EXAM
At What Depth Does Osha Say You Are Required To Have Some Sort Of Cave In
Safety (CORRECT ANSWER) 5'
What Is The Min Working Distance From Energized Power Lines (CORRECT
ANSWER) 20'
What Depth Do You Need A Means Of Egress In Trenching Excavation (CORRECT
ANSWER) 4'
What Is The Max Lateral Distance To The Means Of Egress In A Trench (CORRECT
ANSWER) 25'
After Concrete Is Poured What Must Determined Before Adding A Load (CORRECT
ANSWER) If The Concrete Can Actually Support That Load
Min Height For Steel Erection Fall Protection (CORRECT ANSWER) 15'
Accessible Swing Areas Around Cranes Should Be: (CORRECT ANSWER) Barricaded
Hazard Communication Requirements For Construction Industry Are About The
Same As In (CORRECT ANSWER) 1910
Regular Inspections Should Be Made By (CORRECT ANSWER) A Competent Person
Under Osha Standards, Hard Hats Are Required To Be Worn On Site When
(CORRECT ANSWER) 1. Falling Or Flying Objects Are Present
2. Contractor Requires It
3. Employer Requires It
To Use A Full Face Respirator, Employee Must (CORRECT ANSWER) 1. Be Fit Tested
2. Be Trained.
3. Clean Shaven
Osha Focus Four (CORRECT ANSWER) 1. Crushed By
CSM - 411 Construction Safety Osha-
30 Exam Questions With Verified
Answers Latest 202341/2025
When Was Osha Written And Signed Into Law? (CORRECT ANSWER) Written In
1970 And Signed Into Law 1971
What Are Osha's Top 3 Inspection Priorities/Reasons (CORRECT ANSWER) 1.
Imminent Danger
2. Fatality Or Catastrophic Loss
3. Complaint Or Referral
What Is A Multilift In Steel Erection Called? And How Many Members Can Be Lifted
How Many Feet Apart? (CORRECT ANSWER) Christmas Tree
5 Members @ 7' Apart
What Are The Height Requirements For Fall Protection Standards For Scaffolds,
Steel Erection, And General Work (CORRECT ANSWER) Scaffolds - 10' Above
Steel Erection - 30'
General Work - 6'
What Should Not Be Used As Counterweights (CORRECT ANSWER) Anything
Flowable Such As Sand, Gravel, Or Water
What Is Not An Acceptable System To Be Used For Trenching Excavation For Shoring
And Cave In Protection (CORRECT ANSWER) Plywood
Min Distance Spoil Pile Should Be Used From Trench (CORRECT ANSWER) 2'
If Employee Brings Own Tools And Ppe, Who Is Responisble That These Still Meet
Regulations (CORRECT ANSWER) Employer
, CSM - 411 CONSTRUCTION SAFETY OSHA-30 EXAM
At What Depth Does Osha Say You Are Required To Have Some Sort Of Cave In
Safety (CORRECT ANSWER) 5'
What Is The Min Working Distance From Energized Power Lines (CORRECT
ANSWER) 20'
What Depth Do You Need A Means Of Egress In Trenching Excavation (CORRECT
ANSWER) 4'
What Is The Max Lateral Distance To The Means Of Egress In A Trench (CORRECT
ANSWER) 25'
After Concrete Is Poured What Must Determined Before Adding A Load (CORRECT
ANSWER) If The Concrete Can Actually Support That Load
Min Height For Steel Erection Fall Protection (CORRECT ANSWER) 15'
Accessible Swing Areas Around Cranes Should Be: (CORRECT ANSWER) Barricaded
Hazard Communication Requirements For Construction Industry Are About The
Same As In (CORRECT ANSWER) 1910
Regular Inspections Should Be Made By (CORRECT ANSWER) A Competent Person
Under Osha Standards, Hard Hats Are Required To Be Worn On Site When
(CORRECT ANSWER) 1. Falling Or Flying Objects Are Present
2. Contractor Requires It
3. Employer Requires It
To Use A Full Face Respirator, Employee Must (CORRECT ANSWER) 1. Be Fit Tested
2. Be Trained.
3. Clean Shaven
Osha Focus Four (CORRECT ANSWER) 1. Crushed By
