MSSC MAINTENANCE EXAM STUDY
GUIDE
Every machine contains potential hazards. When using a lathe, you should be
especially mindful of: - ANSWER D: Wrap points.
ANSWER A. OSHA regulates and enforces most workplace dangers and safety
systems.
A technical manual typically contains the following information, with the
exception: - ANSWER C: The cost of the equipment
To achieve the best fit between mating gears, you should: - ANSWER B. Make
them fit with a fine-lapping compound.
Which of the following describes a flammable material? - ANSWER C: gasoline.
Keeping correct records is an essential component of a preventive maintenance
program. A maintenance log includes: - ANSWER Results of testing, inspections,
and maintenance schedule
During an alignment check between two timing pulleys, have ______ to ensure
appropriate belt operation: - ANSWER A: At least three points of contact.
The appropriate oil level in a submerged oil ball bearing system is immersing. -
ANSWER C. Half the bottom ball of the bearing.
Before using any item or piece of equipment, you must be trained in its safe use.
Tool and equipment training is provided by: - Answer. A supervisor or experienced
coworker, the equipment maker, and an on-site or online training course
, A standard operating procedure (SOP) contains a complete set of instructions for
doing a specific task in the form of a written description. The technique is
documented under the standard operating procedures: - ANSWER On a route sheet,
a log book, or on a computer
A power tool safety interlock is designed to prevent a tool from being operated
unless specific circumstances are met.
Which safety color is most typically used to represent dangerous equipment or a
machine component? - Answer: C. Orange
Proper body mechanics are crucial. When pulling an object, all of the following
principles must be followed EXCEPT: - ANSWER A. Applying the work to your
forearms.
Which of the following is true about double-pitch chains: - ANSWER B: The side
plates have been stretched to double the normal pitch.
Tap drill charts are based on what number of threads? - Answer C: 75 percent
Which of the following tools is not a measuring instrument? - ANSWER D:
Adjustable wrench
What are the most typical causes of bearing failure? - Answer D: Both pollution
and misalignment.
A "Grade 5" bolt has ___ cuts on its head. - Answer B: Three.
GUIDE
Every machine contains potential hazards. When using a lathe, you should be
especially mindful of: - ANSWER D: Wrap points.
ANSWER A. OSHA regulates and enforces most workplace dangers and safety
systems.
A technical manual typically contains the following information, with the
exception: - ANSWER C: The cost of the equipment
To achieve the best fit between mating gears, you should: - ANSWER B. Make
them fit with a fine-lapping compound.
Which of the following describes a flammable material? - ANSWER C: gasoline.
Keeping correct records is an essential component of a preventive maintenance
program. A maintenance log includes: - ANSWER Results of testing, inspections,
and maintenance schedule
During an alignment check between two timing pulleys, have ______ to ensure
appropriate belt operation: - ANSWER A: At least three points of contact.
The appropriate oil level in a submerged oil ball bearing system is immersing. -
ANSWER C. Half the bottom ball of the bearing.
Before using any item or piece of equipment, you must be trained in its safe use.
Tool and equipment training is provided by: - Answer. A supervisor or experienced
coworker, the equipment maker, and an on-site or online training course
, A standard operating procedure (SOP) contains a complete set of instructions for
doing a specific task in the form of a written description. The technique is
documented under the standard operating procedures: - ANSWER On a route sheet,
a log book, or on a computer
A power tool safety interlock is designed to prevent a tool from being operated
unless specific circumstances are met.
Which safety color is most typically used to represent dangerous equipment or a
machine component? - Answer: C. Orange
Proper body mechanics are crucial. When pulling an object, all of the following
principles must be followed EXCEPT: - ANSWER A. Applying the work to your
forearms.
Which of the following is true about double-pitch chains: - ANSWER B: The side
plates have been stretched to double the normal pitch.
Tap drill charts are based on what number of threads? - Answer C: 75 percent
Which of the following tools is not a measuring instrument? - ANSWER D:
Adjustable wrench
What are the most typical causes of bearing failure? - Answer D: Both pollution
and misalignment.
A "Grade 5" bolt has ___ cuts on its head. - Answer B: Three.
