300-115
Premium Provider in IT Certification Training Tools
Questions and Answers
Vendor
Cisco
Exam Code
300-115
Exam Name
Implementing Cisco IP Switched Networks (SWITCH v2.0)
1 http://www.selfexamengine.com
, 300-115
QUESTION: 1
What is the maximum number of switches that can be stacked using Cisco StackWise?
A. 4
B. 5
C. 8
D. 9
E. 10
F. 13
Answer: D
QUESTION: 2
A network engineer wants to add a new switch to an existing switch stack. Which
configuration must be added to the new switch before it can be added to the switch stack?
A. No configuration must be added.
B. stack ID
C. IP address
D. VLAN information
E. VTP information
Answer: A
QUESTION: 3
What percentage of bandwidth is reduced when a stack cable is broken?
A. 0
B. 25
C. 50
D. 75
E. 100
Answer: C
QUESTION: 4
2 http://www.selfexamengine.com
, 300-115
Refer to the exhibit.
Which set of configurations will result in all ports on both switches successfully bundling
into an EtherChannel?
A. switch1 channel-group 1 mode active switch2 channel-group 1 mode auto
B. switch1 channel-group 1 mode desirable switch2 channel-group 1 mode passive
C. switch1 channel-group 1 mode on switch2 channel-group 1 mode auto
D. switch1 channel-group 1 mode desirable switch2 channel-group 1 mode auto
Answer: D
QUESTION: 5
Refer to the exhibit.
3 http://www.selfexamengine.com
, 300-115
How can the traffic that is mirrored out the GigabitEthernet0/48 port be limited to only
traffic that is received or transmitted in VLAN 10 on the GigabitEthernet0/1 port?
A. Change the configuration for GigabitEthernet0/48 so that it is a member of VLAN 10.
B. Add an access list to GigabitEthernet0/48 to filter out traffic that is not in VLAN 10.
C. Apply the monitor session filter globally to allow only traffic from VLAN 10.
D. Change the monitor session source to VLAN 10 instead of the physical interface.
Answer: C
QUESTION: 6
Refer to the exhibit.
A network engineer wants to analyze all incoming and outgoing packets for an interface
that is connected to an access switch. Which three items must be configured to mirror
traffic to a packet sniffer that is connected to the distribution switch? (Choose three.)
A. A monitor session on the distribution switch with a physical interface as the source and
4 http://www.selfexamengine.com
Premium Provider in IT Certification Training Tools
Questions and Answers
Vendor
Cisco
Exam Code
300-115
Exam Name
Implementing Cisco IP Switched Networks (SWITCH v2.0)
1 http://www.selfexamengine.com
, 300-115
QUESTION: 1
What is the maximum number of switches that can be stacked using Cisco StackWise?
A. 4
B. 5
C. 8
D. 9
E. 10
F. 13
Answer: D
QUESTION: 2
A network engineer wants to add a new switch to an existing switch stack. Which
configuration must be added to the new switch before it can be added to the switch stack?
A. No configuration must be added.
B. stack ID
C. IP address
D. VLAN information
E. VTP information
Answer: A
QUESTION: 3
What percentage of bandwidth is reduced when a stack cable is broken?
A. 0
B. 25
C. 50
D. 75
E. 100
Answer: C
QUESTION: 4
2 http://www.selfexamengine.com
, 300-115
Refer to the exhibit.
Which set of configurations will result in all ports on both switches successfully bundling
into an EtherChannel?
A. switch1 channel-group 1 mode active switch2 channel-group 1 mode auto
B. switch1 channel-group 1 mode desirable switch2 channel-group 1 mode passive
C. switch1 channel-group 1 mode on switch2 channel-group 1 mode auto
D. switch1 channel-group 1 mode desirable switch2 channel-group 1 mode auto
Answer: D
QUESTION: 5
Refer to the exhibit.
3 http://www.selfexamengine.com
, 300-115
How can the traffic that is mirrored out the GigabitEthernet0/48 port be limited to only
traffic that is received or transmitted in VLAN 10 on the GigabitEthernet0/1 port?
A. Change the configuration for GigabitEthernet0/48 so that it is a member of VLAN 10.
B. Add an access list to GigabitEthernet0/48 to filter out traffic that is not in VLAN 10.
C. Apply the monitor session filter globally to allow only traffic from VLAN 10.
D. Change the monitor session source to VLAN 10 instead of the physical interface.
Answer: C
QUESTION: 6
Refer to the exhibit.
A network engineer wants to analyze all incoming and outgoing packets for an interface
that is connected to an access switch. Which three items must be configured to mirror
traffic to a packet sniffer that is connected to the distribution switch? (Choose three.)
A. A monitor session on the distribution switch with a physical interface as the source and
4 http://www.selfexamengine.com
