Page 1 of 70
CTR 156CT PROPANE FINAL EXAM 2024-
2025 TESTBANK WITH ALL 350
QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS)|
ALREADY GRADED A+|JUST RELEASED!!
Which is NOT a responsibility of a propane dispenser operator?
A. Understanding the regulations and operations of the dispensing
equipment.
B. Repairing defective and damaged cylinders
C. Inspecting customer cylinders and containers to ensure they are safe
for filling.
, Page 2 of 70
D. Filling containers to their proper levels and preventing them from
being overfilled.
B. Repairing defective and damaged cylinders
Important safety tips to tell customers before transporting cylinders
include:
A. Always transport and store a cylinder in a secure and upright position
so it will not fall, shift, or roll.
B. Never keep a filled cylinder inside a hot vehicle.
C. Always proceed directly to your destination and immediately remove
the cylinder from your vehicle.
D. All of the above
D. All of the above
What is an SDS?
A. A detailed producer for inspecting propane containers
B. A detailed procedure for filling propane cylinders
, Page 3 of 70
C. An information bulletin that alerts you to properties and health
hazards of propane.
D. A consumer safety information packet
C. An information bulletin that alerts you to properties and health
hazards of propane
When filling. A cylinder by weight, the scale set point should equal the
__________________.
A. Tare weight + Propane capacity [lb]
B. Tare weight + propane capacity [lb] + hose amend fitting weight
C. Propane capacity [lb] + hose and fitting weight
D. Take weight + Propane capacity [lb] - hose weight
B. Tare weight + propane capacity + hose and fitting weight
After filling the cylinder, you need to ______________ to complete the
job.
A. Check for leaks using an approved method
B. Reinstall appropriate valve caps and plugs
C. Apply any required labels if missing or not legible
, Page 4 of 70
D. All of the above
D. All of the above
When filling a cylinder by volume using the fixed maximum liquid level
gauge, the filling process relies on the ____________________ to
determine when the maximum permitted filling limit for a cylinder is
reached.
A. Sensor
B. Trip Lever
C. Operator
D. Control Valve
C. Operator
When filling a cylinder by volume and a white mist begins to escape
from the fixed maximum liquid gauge, you need to immediately
A. Shut off the pump
B. Check for leaks
CTR 156CT PROPANE FINAL EXAM 2024-
2025 TESTBANK WITH ALL 350
QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS)|
ALREADY GRADED A+|JUST RELEASED!!
Which is NOT a responsibility of a propane dispenser operator?
A. Understanding the regulations and operations of the dispensing
equipment.
B. Repairing defective and damaged cylinders
C. Inspecting customer cylinders and containers to ensure they are safe
for filling.
, Page 2 of 70
D. Filling containers to their proper levels and preventing them from
being overfilled.
B. Repairing defective and damaged cylinders
Important safety tips to tell customers before transporting cylinders
include:
A. Always transport and store a cylinder in a secure and upright position
so it will not fall, shift, or roll.
B. Never keep a filled cylinder inside a hot vehicle.
C. Always proceed directly to your destination and immediately remove
the cylinder from your vehicle.
D. All of the above
D. All of the above
What is an SDS?
A. A detailed producer for inspecting propane containers
B. A detailed procedure for filling propane cylinders
, Page 3 of 70
C. An information bulletin that alerts you to properties and health
hazards of propane.
D. A consumer safety information packet
C. An information bulletin that alerts you to properties and health
hazards of propane
When filling. A cylinder by weight, the scale set point should equal the
__________________.
A. Tare weight + Propane capacity [lb]
B. Tare weight + propane capacity [lb] + hose amend fitting weight
C. Propane capacity [lb] + hose and fitting weight
D. Take weight + Propane capacity [lb] - hose weight
B. Tare weight + propane capacity + hose and fitting weight
After filling the cylinder, you need to ______________ to complete the
job.
A. Check for leaks using an approved method
B. Reinstall appropriate valve caps and plugs
C. Apply any required labels if missing or not legible
, Page 4 of 70
D. All of the above
D. All of the above
When filling a cylinder by volume using the fixed maximum liquid level
gauge, the filling process relies on the ____________________ to
determine when the maximum permitted filling limit for a cylinder is
reached.
A. Sensor
B. Trip Lever
C. Operator
D. Control Valve
C. Operator
When filling a cylinder by volume and a white mist begins to escape
from the fixed maximum liquid gauge, you need to immediately
A. Shut off the pump
B. Check for leaks
