Intermodal Dry Cargo CNTR/CSC Reinspection (Cert) Questions And Answers Rated A+ New Update Assured Satisfaction

What is the maximum allowable depth of a door header dent? Refer to MIL-STD-3037, Section 4 as required. - ¾" for IMDG, 1-⅜" for general cargo Located in the MIL-STD-3037 appendix, what form is used to ensure each container inspection is conducted in a thorough, systematic manner? - DD Form 2282 decal Refer to DA Form 2404 below. What is the appropriate entry for Item #5 in this example? - Unserviceable for IMDG and Non-IDMG Select the appropriate defect classification for the container defect: Cracked lower rear roadside corner fitting. Refer to MIL-STD-3037, Section 4 as required. - Non-IMDG Major Select the appropriate defect classification for the container defect: Door sill has 7" splice on left side. Refer to MIL-STD-3037, Section 4 as required. - IMDG Major Select the appropriate defect classification for the following container defect: Dent 3/16" deep on the road side panel. Refer to MIL-STD-3037, Section 4 as required. - Minor Select the section where descriptions of each defect are documented on this container inspection checklist. - *Remarks Section* According to the DD Form 2282 decal shown below, when was this container last inspected? - November 2018What is the primary reference used by inspectors to conduct CSC container inspections? - MILSTD-3037 What must be displayed on both ends, both sides, and the top of a container? - ISO Identification Markings When inspecting containers, what tool is used to determine weld serviceability and the severity of corrosion? - Welder's Hammer When inspecting containers, what tool is used to move containers by lifting them at the corner fittings? - Container handler When inspecting containers, what tool would you use to inspect a container's alignment? - Measuring Tape Where do you find the container inspection checklist for a mobile facility? - MIL-STD-3037, Appendix A Which container component is highlighted? - Forklift Pockets Which container component is highlighted? - Gooseneck tunnel Which container component is highlighted? - Threshold Plate Which container component is highlighted? - Top End Rail Which container component is shown? - CrossmembersWhich of the following containers allows for easier loading and unloading of large bulky stock, such as bombs? - Side-Opening Which of the following containers is the most commonly-used by all military branches to ship general purpose dry cargo? - End-opening