Dell Client Advanced exam (with extra Q & A) with 100% Correct Verified Answers Latest Update 2024 Rated A+ What is an example for loT application? - correct answer -Wearable gadgets Household appliances DPK stands for - correct answer -Digital Product Key True or False: NIC Activity LED is off and Link indicator is green, This indicates NIC is connected to a valid network at its maximum port speed but data isn't being sent/ received - correct answer -True The following items are unaffected by the RTC reset: - correct answer -
Service Tag Asset Tag HHD Password System Password True or False: The OEM Identity (ID) Module is a Utility used to replace the Dell Logo on the System Hardware like the Bezel - correct answer -False Which Screwdriver is recommended for removing PHM (Processor Heat Sink Module) used on a Pr ecision Rack 7920? - correct answer -Torx #T30 LED codes for Memory related issues in a Dell Edge Gateway - correct answer -2,3 2,4 2,5 2,6 How many intrusion switches are there in Dell Precision Tower 7920 - correct answer -? True or False: In Alienware systems, errors are indicated via the tr icolor Power Button LED - correct answer -False In general, am Anit -Static Mat is used to prevent Electrostatic Damage - correct answer -True Which indicator shows whether Power is present or a power fault has occurred in Precision systems? - correct answer -? ePSA stands for - correct answer -Enhanced Pre -boot System Assessment If an Edge Gateway is Blinking Green after the diagnostics, What does it indicated? - correct answer -? In a Precision Rack, one PSU is faulty and other one is fine. After hot plugging the new PSU it starts to blink green and turns off. What do y ou think is the cause - correct a nswer -PSU has Firmware/Voltage mismatch True or False: On a Precision Workstation, if a Hard drive status indicator flashes green, amber and then turns off; this indicates the drive is rebuilding - correct answer -False iDRAC stands for: - correct answer -Integ rated Dell Remote Access Controller True or False: In the latest Precision Rack, the iDRAC Enterprise License is available by default - correct answer -False Statements which are right concerning RAID 5 - correct answer -It strips the Data among the drives with a parity bit It can sustain up to one drive failure Minimum number of drives is 3
Service Tag Asset Tag HHD Password System Password True or False: The OEM Identity (ID) Module is a Utility used to replace the Dell Logo on the System Hardware like the Bezel - correct answer -False Which Screwdriver is recommended for removing PHM (Processor Heat Sink Module) used on a Pr ecision Rack 7920? - correct answer -Torx #T30 LED codes for Memory related issues in a Dell Edge Gateway - correct answer -2,3 2,4 2,5 2,6 How many intrusion switches are there in Dell Precision Tower 7920 - correct answer -? True or False: In Alienware systems, errors are indicated via the tr icolor Power Button LED - correct answer -False In general, am Anit -Static Mat is used to prevent Electrostatic Damage - correct answer -True Which indicator shows whether Power is present or a power fault has occurred in Precision systems? - correct answer -? ePSA stands for - correct answer -Enhanced Pre -boot System Assessment If an Edge Gateway is Blinking Green after the diagnostics, What does it indicated? - correct answer -? In a Precision Rack, one PSU is faulty and other one is fine. After hot plugging the new PSU it starts to blink green and turns off. What do y ou think is the cause - correct a nswer -PSU has Firmware/Voltage mismatch True or False: On a Precision Workstation, if a Hard drive status indicator flashes green, amber and then turns off; this indicates the drive is rebuilding - correct answer -False iDRAC stands for: - correct answer -Integ rated Dell Remote Access Controller True or False: In the latest Precision Rack, the iDRAC Enterprise License is available by default - correct answer -False Statements which are right concerning RAID 5 - correct answer -It strips the Data among the drives with a parity bit It can sustain up to one drive failure Minimum number of drives is 3
