Assessment 5
Started on Monday, 20 May 2024,
State Finished
Completed on Monday, 20 May 2024,
Time taken
Marks 40.00/40.00
Grade 100.00 out of 100.00
Question 1
_____________ is recognised as the professional body to register occupational
health and safety professionals in South Africa.
a.
The Board of Safety Professionals
b.
The South African Institute for Occupational Safety and Health (SAIOSH)
c.
The OSH Act
d.
The Institute for Safety Professionals
Feedback
The correct answer is: The South African Institute for Occupational Safety and
Health (SAIOSH)
Question 2
For the professional designation of GradSaiosh to be awarded, members must
comply with the minimum requirement of:
a.
An underlying registered qualification (NQF level 6 diploma with 360 credits) and at
least 3 years’ postgraduate practical health and safety workplace experience.
b.
,An underlying registered qualification (NQF level 7 post graduate diploma or degree)
and at least 3 years’ postgraduate practical health and safety workplace experience.
c.
An underlying registered qualification (NQF level 7 post graduate diploma or degree)
and at least 5 years’ postgraduate practical health and safety workplace experience.
d.
An underlying registered qualification (NQF level 5 qualification with 265 credits) and
at least 3 years’ postgraduate practical health and safety workplace experience.
Feedback
The correct answer is: An underlying registered qualification (NQF level 6 diploma
with 360 credits) and at least 3 years’ postgraduate practical health and safety
workplace experience.
Question 3
A ____________ is an occurrence which could have resulted in injury, damage, or
both but did not.
a.
Mishap
b.
Near-miss
c.
Hazard
d.
Risk
Feedback
The correct answer is: Near-miss
Question 4
A safety programme progresses through five sequential phases. What is the third
phase in the life cycle?
a.
The concept phase
, b.
The design, definition or development phase
c.
The disposal or termination phase
d.
The production phase
Feedback
The correct answer is: The production phase
Question 5
During which phase of the life cycle does training start?
a.
The concept phase
b.
The production phase
c.
The disposal or termination phase
d.
The operation and deployment phase
Feedback
The correct answer is: The production phase
Question 6
Suppose an employee got injured in the working environment and sustained a minor
injury. Which option represents the correct risk category and the description
regarding this minor injury?
a.
2, Critical
b.
3, Marginal
c.
4, Marginal
Started on Monday, 20 May 2024,
State Finished
Completed on Monday, 20 May 2024,
Time taken
Marks 40.00/40.00
Grade 100.00 out of 100.00
Question 1
_____________ is recognised as the professional body to register occupational
health and safety professionals in South Africa.
a.
The Board of Safety Professionals
b.
The South African Institute for Occupational Safety and Health (SAIOSH)
c.
The OSH Act
d.
The Institute for Safety Professionals
Feedback
The correct answer is: The South African Institute for Occupational Safety and
Health (SAIOSH)
Question 2
For the professional designation of GradSaiosh to be awarded, members must
comply with the minimum requirement of:
a.
An underlying registered qualification (NQF level 6 diploma with 360 credits) and at
least 3 years’ postgraduate practical health and safety workplace experience.
b.
,An underlying registered qualification (NQF level 7 post graduate diploma or degree)
and at least 3 years’ postgraduate practical health and safety workplace experience.
c.
An underlying registered qualification (NQF level 7 post graduate diploma or degree)
and at least 5 years’ postgraduate practical health and safety workplace experience.
d.
An underlying registered qualification (NQF level 5 qualification with 265 credits) and
at least 3 years’ postgraduate practical health and safety workplace experience.
Feedback
The correct answer is: An underlying registered qualification (NQF level 6 diploma
with 360 credits) and at least 3 years’ postgraduate practical health and safety
workplace experience.
Question 3
A ____________ is an occurrence which could have resulted in injury, damage, or
both but did not.
a.
Mishap
b.
Near-miss
c.
Hazard
d.
Risk
Feedback
The correct answer is: Near-miss
Question 4
A safety programme progresses through five sequential phases. What is the third
phase in the life cycle?
a.
The concept phase
, b.
The design, definition or development phase
c.
The disposal or termination phase
d.
The production phase
Feedback
The correct answer is: The production phase
Question 5
During which phase of the life cycle does training start?
a.
The concept phase
b.
The production phase
c.
The disposal or termination phase
d.
The operation and deployment phase
Feedback
The correct answer is: The production phase
Question 6
Suppose an employee got injured in the working environment and sustained a minor
injury. Which option represents the correct risk category and the description
regarding this minor injury?
a.
2, Critical
b.
3, Marginal
c.
4, Marginal
