6.1 HAAS CONTROL KEYPAD & SCREEN -
BASIC MILL OPERATOR
Any time you have pressed the E-Stop button, you will need to rotate it clockwise to
disengage it, and then press Reset to exit the E-Stop state and reset the machine. -
ANS-True
If the machine gets interrupted during a tool change, the machine cannot run until the
tool change is completed. Pressing the Recover key allows the machine to complete the
tool change, and return the tool changer to Home position. - ANS-True
One of the tool release buttons is located on the control keypad. The other tool release
button is located: - ANS-Right above the spindle and coolant line, on the spindle head
cover
The 4 keys to the right of the Mode keys control what you can do within each of the
Mode keys. - ANS-True
The Display and Mode section of the control keypad is what you see in the upper two
quadrants of the display screen on the control. - ANS-True
The first button to review in the Display section is the Program Button. This button
shows the operator: - ANS-Information related to the Active Program that is loaded into
Memory, and visible in the upper left side of the control window
The Haas Control is the computer system that runs the Haas machine. - ANS-True
The last quadrant of the Control Keypad discussed in the video was the Override
Section.This section is important for both the Operator and the setup person. -
ANS-True
The Offset button ___________? - ANS-Opens a window that contains your work and
tool offsets in the control screen
The Operator can use the keys in the Spindle and Axis Override Section whenever
he/she wants. - ANS-False
BASIC MILL OPERATOR
Any time you have pressed the E-Stop button, you will need to rotate it clockwise to
disengage it, and then press Reset to exit the E-Stop state and reset the machine. -
ANS-True
If the machine gets interrupted during a tool change, the machine cannot run until the
tool change is completed. Pressing the Recover key allows the machine to complete the
tool change, and return the tool changer to Home position. - ANS-True
One of the tool release buttons is located on the control keypad. The other tool release
button is located: - ANS-Right above the spindle and coolant line, on the spindle head
cover
The 4 keys to the right of the Mode keys control what you can do within each of the
Mode keys. - ANS-True
The Display and Mode section of the control keypad is what you see in the upper two
quadrants of the display screen on the control. - ANS-True
The first button to review in the Display section is the Program Button. This button
shows the operator: - ANS-Information related to the Active Program that is loaded into
Memory, and visible in the upper left side of the control window
The Haas Control is the computer system that runs the Haas machine. - ANS-True
The last quadrant of the Control Keypad discussed in the video was the Override
Section.This section is important for both the Operator and the setup person. -
ANS-True
The Offset button ___________? - ANS-Opens a window that contains your work and
tool offsets in the control screen
The Operator can use the keys in the Spindle and Axis Override Section whenever
he/she wants. - ANS-False
