CR101B Introduction to Collision Repair Exam Questions with 100% Correct Answers

CR101B Introduction to Collision Repair Exam Questions with 100% Correct Answers Which of these warnings is shown in the symbol below? - ✔✔Flammable The reason a safety cable is used on a pulling chain is to: - ✔✔help reduce backlash if the chain comes loose. Why are a type of lineman's gloves recommended when working with high voltage parts? - ✔✔They are electrically insulated. Which of these safety items is recommended when doing the process shown in the photo below? (Using a hammer & dolly) - ✔✔Safety glasses Which of these warnings is shown in the symbol below? - ✔✔Poison Which of these is a safety issue when doing the process shown in the photo below? (Spot welding) - ✔✔Sparking from the welding process Which of these safety items is missing on the technician in the photo below? (Using angle grinder) - ✔✔Full-face shield Which of these safety items is missing on the technician in the photo below? (Wiping a car down with something) - ✔✔Protective gloves Which of these sheathing colors is commonly used to designate high voltage wiring? - ✔✔Bright orange Which of these safety equipment items avoids flash burn when observing the ta sk shown in the photo below? (welding) - ✔✔Welding helmet Technician A says that employers are allowed to remove information from an SDS for use in the work place. Technician B says that employers should retain an SDS for 30 years after the product is no l onger used. Who is right? - ✔✔B only A carcinogen is a substance that causes: - ✔✔cancer Olfactory fatigue is when a person: - ✔✔can no longer smell a chemical after exposure. A Class B fire extinguisher could be used on a: - ✔✔burning solvent. Which of th ese can occur while welding on a panel that has a catalyzed clearcoat finish? - ✔✔Release of isocyanate vapors Hepatitis B is considered: - ✔✔a blood borne pathogen. Information on cleaning a hazardous material spill can be found in what section of an SDS? - ✔✔Accidental Release Measures If a container does not have a label, a technician should: - ✔✔avoid handling material until identified. Which of these should be worn when using a half - mask supplied -air respirator during refinishing? - ✔✔Goggles A flamma ble material: - ✔✔can easily catch fire and burn rapidly or explosively. The process being shown in the photo above is: (body filler) - ✔✔applying body filler. A supplement is a: - ✔✔change to the damage report. Which of these damage conditions is illustra ted above? (Bend in frame rail) - ✔✔Mash The imaginary plane shown in red in the illustration above is used to measure: (through center of vehicle - front to rear) - ✔✔width The welded joint shown in the illustration above is: (two pieces joined together w /backing) - ✔✔a butt joint with backing. The technician in the photo above is marking: (yellow marker line on rail) - ✔✔the cut location on the damaged rail.