CSLB C10 Test 1 | 120 Questions and Correct Solutions
CSLB C10 Test 1 | 120 Questions and Correct Solutions What is the minimum working clearance from an electrical panel under 600 V? 36" Voltage drop in wire is a function of: Wire gauge, Length of wire, Current flow in the wire A 12-volt direct current, 13-watt fluorescent light is controlled by a photocell. The average daily on-time is 12 hours per day. How many watt-hours are consumed by the light on an average day? 156 Where may you use nonmetallic-sheathed cable? inside floors and walls What is the maximum permitted distance between convenience outlets in kitchens? 12' The minimum permitted size fixture wire is: No. 18 What is an Erickson coupling used for? to connect two sections of rigid conduit when one section cannot be turned The smallest size grounding conductor permitted for service entrance is: No. 8 copper For an electric appliance with a 17.5 A load, the overcurrent device must not exceed: 25 amps A 5 kW appliance is used for 5 hours. At $0.014 per kWh, the cost of running the appliance is: $0.35 If the plumber accidentally cuts installed wires, to
Written for
- Institution
- Cslb contractor
- Course
- Cslb contractor
Document information
- Uploaded on
- June 4, 2024
- Number of pages
- 11
- Written in
- 2023/2024
- Type
- Exam (elaborations)
- Contains
- Questions & answers
Subjects
- cslb c10 test 1 2024
- cslb c10 test 1 2025
-
what is the minimum working clearance from an elec
Also available in package deal