Vivint Smart Home Pro Final Exam Questions and Answers 2024 with complete solution

Vivint Smart Home Pro Final Exam Questions and
Answers 2024 with complete solution

12-24v - ✔️✔️- What is the input voltage range of the Doorbell Cam?

16.5 VAC - ✔️✔️- What is the output voltage of the transformer used to power the

SkyControl panel?

true - ✔️✔️- True or False: When programming a sensor into the sky panel you can

type in the serial number or "learn" it in by triggering the device

2 - ✔️✔️- When programming a DW21, which loop number is used?

1

2

3

beans and wire caps - ✔️✔️- Which of the following materials can you use to group

multiple ground terminals in a takeover module:

Solder

String

Wire Caps

Duct Tape

Beans

True - ✔️✔️- T or F: When installing the firefighter, it is required to test the customer's

existing smoke detectors

3/4" - ✔️✔️- When installing a DW21, what size bit should you use to drill the hole for

the sensor?

, 1/2"

3/8"

3/4"

1"

True - ✔️✔️- T or F: When installing the TAKE-345, you must ensure that the

transformer is supplying power to the power supply before the battery.

True - ✔️✔️- T or F: You are required to test signals from all secondary keypads and

key fobs even though they are not detection devices

False - ✔️✔️- T or F: When running power to the TAKE-345 polarity does not apply

- ✔️✔️- What is the correct height at which to install the PIR2?

7 ft

At least 5 ft

At least 7 ft

At 7.5 ft

How would you program a CO3 if mounted on a hallway wall?

Loop 1 Zone 8

Loop 1 Zone 14

Loop 3 Zone 4

Loop 1 Zone 4 - ✔️✔️-

When installing a DW21 into a metal door frame, with a wooden door, what should you

be sure to use?

Metal Drill bit

A DW11 should be used on all metal door frames