Air Conditioning Certification 100% CORRECT AND UPDATED!
After a system has been opened and the compressor changed you should - ANSWERreplace the line drier, leak check, evacuate and recharge When testing an air cooled condenser, the SAT of the condenser should be - ANSWER30F higher than the entering air Solid contaminants such as sludge and carbon from a compressor burnout are best removed by - ANSWERflushing the system, then installing a liquid line and suction line driers An increase in head psi will cause ___________ refrigerant to flow through a cap tube metering device - ANSWERmore A low pressure cut off switch is used to - ANSWERestablish a minimum operating pressure in the evaporator Which of the fallowing symptoms would be indicative of a oil logged condenser - ANSWERHigh discharge line pressure and low liquid line pressure
Geschreven voor
- Instelling
- Air Conditioning Certification
- Vak
- Air Conditioning Certification
Documentinformatie
- Geüpload op
- 26 mei 2024
- Aantal pagina's
- 1
- Geschreven in
- 2023/2024
- Type
- Tentamen (uitwerkingen)
- Bevat
- Vragen en antwoorden
Onderwerpen
-
air conditioning certification 100 correct and up
-
air conditioning certification stuvia
-
air conditioning certification
-
after a system has been opened and the compressor
-
when testing an air cooled con
Ook beschikbaar in voordeelbundel