AMPP CIP1 CBT EXAM QUESTIONS AND ANSWERS

AMPP view of role of Basic Coating Inspector- restrictions at each level. - Answer-"a quality technician whose primary responsibility is to assess & report on the technical aspects of an industrial coating project & its conformance of deviation from the project specification." CIP level 1= ability to undertake basic coating inspection work under the supervision of a competent/qualified coatings inspector. AMPP - Answer-Association for Material Protection & Performance purpose of inspection - Answer-inspectors help to ensure that coatings are installed correctly &, therefore, able to protect vital assets, equipment, & infrastructure from corrosion. coating inspector - Answer-verifies if the coating system being installed, in compliance with the specification's requirements. inspection process - Answer--Plan: review Specs, PDS, SDS. create inspection test plan. -assess &/or Test: observe work performed & test environment. -Verify: check that results are in conformance with spec. -Document: observations, measurements, test data, & report to stakeholder. what should you do if you find discrepancies between the spec & the coating manufacters PDS? - Answer-seek clarification from the owners rep during the pre-job conf. primary role of the coating inspector - Answer-quality control primary purpose of applying industrial coatings - Answer-to prevent or limit contact between a metal substrate & its corrosive environment. corrosion - Answer-the deterioration of a metal or alloy that results from an electrochemical reaction with its environment. Corrosion Cell - Answer-Contains the anode, cathode, metallic pathway and electrolyte