2024 Dante Level 1-3 Questions and Answers with complete solution

Dante audio streams over WiFi networks [are _______________________]. - Answer-not supported The bit depth of an audio system dictates - Answer-The amplitude resolution of each sample Does Dante support MIDI - Answer-No. Dante only transports audio data and does not interfere with MIDI. Is there any advantage to using automatic IP addressing on a Dante network - Answer-Yes. Automatic addressing ensures that devices create a working LAN. How are device names used in Dante - Answer-Subscriptions are made from name to name Dante works best with [______________] switches - Answer-gigabit On a Dante network, latency is - Answer-deterministic, set per device As sample rate is increased on a device, what other property is usually changed - Answer-Channel count is reduced Where do Dante settings reside? - Answer-On individual Dante devices In the Dante Controller Routing tab, a green check mark indicates - Answer-Subscription successful Which of the following are diagnostic features of Dante Controller? (check all that apply) - Answer-1. Latency monitoring 2. Clock monitoringHow does Dante interact with Energy Efficient Ethernet (EEE) switches? - Answer-EEE switches are not recommended for use with Dante When should fiber be used for an Ethernet connection? - Answer-When runs over 100 meters are required. The easiest way to get IP addresses for a functional stand-alone Dante network is for all devices and computers to - Answer-Use the "obtain an IP Address Automatically" setting If a network is only used for Dante and has only one network switch, then - Answer-The network does not require a managed switch Does Dante require special network cabling? - Answer-Regular CAT5E or CAT6 Ethernet cable is recommended How are devices added to a Dante network - Answer-Devices are automatically discovered and displayed in Dante Controller Dante uses [_________________________] switches. - Answer-standard How are devices restored to a Dante network after power cycle - Answer-Devices and connections are automatically restored What does the Dante Clock Master do - Answer-Provides synchronization for all Dante devices on the network Does a Dante network require special configuration for clocking - Answer-No. A Clock Master is always automatically elected by Dante A[______________] network topology is a best practice for Dante. - Answer-star What is latency - Answer-Latency is the audio signal delay in any audio system.Dante transmitters are sources. Dante receivers are [______________________]. - Answer-destinations The names of devices and channels in Dante are - Answer-User-definable and remembered by devices. The default Dante latency of 1 millisecond is - Answer-very low and suitable for the majority of applications What are the steps to delete a subscription in Dante Controller? (drag to put steps in the correct order) - Answer-1. Open both transmitter and receiver to expose channels 2. Click green checkmark at intersection of channels you wish to unsubscribe 3. Wait for green checkmark to disappear Audio sent over a Dante network is - Answer-uncompressed, bit-perfect Dante is an example of [_____________________________]. - Answer-an audio over IP (AoIP) solution What are the steps to create a subscription in Dante Controller? (drag to put steps in the correct order) - Answer-1. Open the transmitter and receiver to expose channels of each 2. Click at the intersection of the two channels you wish to connect 3. Wait for green check mark to appear What is a LAN - Answer-A computer network that interconnects computers using a common range of IP addresses Dante [________________] use fiber instead of copper cable for Ethernet. - Answer-Can Approximately how much bandwidth is consumed by 64 channels of audio @ 48kHz/24 bit-depth, excluding network overhead? - Answer-74mbits/sec