TestOut LabSim -2-4-3 PC Tools Practice Questions with Complete Solutions

TestOut LabSim -2-4-3 PC Tools Practice Questions with Complete Solutions Which tool would you use to grab and lift small objects? A. IC extractor B. Multi-meter C. 3-prong holder D. Cable tester C. 3-prong holder You are an IT technician for your company. One of your employees has a computer that continually reboots when it is powered on. He has asked you to fix it. You suspect that the power supply may be failing. Which of the following is the BEST way to determine whether the power supply is causing the reboots? A. Replace the power supply. B. Listen for POST code beeps to determine the error's cause C. Verify that the fan on the power supply is spinning D. Use a multimeter to the power supply. D. Use a multi-meter to the power supply. You are removing screws from a computer, but several have fallen into places you cannot reach. Which tool will help retrieve the small screws? A. Screwdriver B. IC extractor C. Needle-nose pliers D. Extension magnet D. Extension magnet Which tool would be the best choice to remove and replace the motherboard BIOS chip? A. IC extractor B. Screwdriver C. Needle-nose plier D. Combination ratchet A. IC extractor Which of the following BEST describes the purpose for which loopback plugs are used? A. Testing ports by returning output signals as input. B. Grabbing and lifting small objects. C. Connecting computer together without using network cards or modems. D. Removing broken pins within sockets. A. Testing ports by returning output signals as input A printer is behaving erratically and you suspect a faulty parallel port. Which tool can use to test the parallel port? A. Ammeter B. Cable Tester C. Loopback plug D. Multimeter C. Loopback plug Which tool would you use to measure electrical properties such as voltage, amps, and resistance? A. IC extractor B. Cable Tester