SHP FINAL EXAM QUESTIONS WITH 100% CORRECT ANSWERS

SHP FINAL EXAM QUESTIONS WITH 100% CORRECT ANSWERS True - ANSWER The firefighter may be installed next to a stand -alone battery smoke detector False - ANSWER When performing a full system test, you may bypass any open doors or windows Always enable the emergency - ANSWER When programming an skey1,you must False - ANSWER When running power to the take345,polarity doesn't apply Audible alarm (7) - ANSWER When programming the emergency key for the skey1,which zone/sensor type is used. True - ANSWER When installing a smkt3,you must use the included screws and anchors True - ANSWER When installing the firefighter, it is required to test the customers existing smoke detectors Between 6"(15cm) and 2'(61cm) from floor - ANSWER When installing a Dw21, where is the approved location for the sensor Provided double sided tape - ANSWER When installing a dw11 on a vinyl or metal frame, what should primarily use to mount the sensor Beans & wire caps - ANSWER Which of the following materials can you use to group multiple ground terminals in a takeover. Smoke detector - ANSWER Which of the following sensors are you not allowed to program using a translator True - ANSWER When installing the take345, you must always test the new 12v battery before using it. 16.5 - ANSWER What is the output voltage of tran sformer used to power the sky control 12" - ANSWER What is the minimum distance for placement of a co3 from the corners of the wall False - ANSWER The smkt3 has 2 function:smoke and heat detection Loop 1 Zone 14 - ANSWER How would you program a co3 if m ounted on a hallway wall